Wafer cleaner / mask cleaner (IAF-08.3) - PR1146362-2050-P
Wafer cleaner / mask cleaner (IAF-08.3) The requirement is for a wafer and mask cleaning machine to be installed in an ISO Class 4 cleanroom and which must comply with European safety regulations for industrial equipment. The system is intended to remove particles and contaminants from wafers and lithography masks usin...
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
Wafer cleaner / mask cleaner (IAF-08.3) The requirement is for a wafer and mask cleaning machine to be installed in an ISO Class 4 cleanroom and which must comply with European safety regulations for industrial equipment. The system is intended to remove particles and contaminants from wafers and lithography masks using aqueous and aci...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: Fraunhofer-Gesellschaft - Einkauf B12
- Veröffentlicht: 30. März 2026
- Frist: Nicht angegeben
Ausschreibungsbeschreibung
Wafer cleaner / mask cleaner (IAF-08.3) The requirement is for a wafer and mask cleaning machine to be installed in an ISO Class 4 cleanroom and which must comply with European safety regulations for industrial equipment. The system is intended to remove particles and contaminants from wafers and lithography masks using aqueous and acidic solutions, based on the RCA cleaning process. To ensure safe operation and a long service life, the process chamber must be made of process-media-resistant material and be equipped with an extraction system and leak detection. The system must be capable of reliably removing particles larger than 250 nm from (quartz) glass or wafers in order to ensure the purity required for the processes in the Fraunhofer IAF cleanroom and not to compromise process yield. Translated with DeepL.com (free version)
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
1 Datei erfasst- Bekanntmachung
Ähnliche Bekanntmachungen
10- Fraunhofer-Gesellschaft - Einkauf B12
Wafer cleaner / mask cleaner (IAF-08.3) - PR1146362-2050-P
Wafer cleaner / mask cleaner (IAF-08.3) The requirement is for a wafer and mask cleaning machine to be installed in an ISO Class 4 cleanroom and which must comply with European safety regulations for industrial equipment. The system is intended to remove particles and contaminants from wafers and lithography masks using aqueous and acidic solutions, based on the RCA cleaning process. To ensure safe operation and a long service life, the process chamber must be made of process-media-resistant material and be equipped with an extraction system and leak detection. The system must be capable of reliably removing particles larger than 250 nm from (quartz) glass or wafers in order to ensure the purity required for the processes in the Fraunhofer IAF cleanroom and not to compromise process yield. Translated with DeepL.com (free version)
- Fraunhofer-Gesellschaft - Einkauf B12
ICP Trockenätzanlage Chlor IV (IAF-07b1) - PR1119209-2050-P
1 piece Chlorine ICP Chlorine ICP etching system with planar plasma source The etching processes developed and qualified at the IAF for structuring must be directly reusable on the new system and deliver corresponding etching results, as with the etching system currently in use (Sentech ICP-RIE SI500 537). These known processes should be transferable to wafer sizes of 150 mm. Options: Substrate electrode Option to etch wafers with a diameter of 100 mm (flat) and fragments on metal carriers. Substrate electrode Option to etch 75 mm diameter wafers (flat) and fragments on metal carriers. Process chamber Heated liner Service Extended warranty Spare parts kit Gas ring Spare parts kit MVV measuring tube Spare parts kit Silencer and protective cover for lock pump Spare parts kit Turbo pump for lock Spare parts kit Coupling plate without window Spare parts kit Clamping for 150 mm wafers with notch Spare parts kit Julabo recirculating cooler as replacement Spare parts kit PLC control unit (CPU / RFC) Translated with DeepL.com (free version)
- Fraunhofer-Gesellschaft - Einkauf B12
Prober 300mm (IAF-09.3) - PR971253-2050-P
2 pieces: Prober 300mm For the automated characterization of circuits in the millimetre wave range up to approx. 250 GHz by means of S-parameter and power measurements, two wafer probers are required that meet the highest requirements for positioning accuracy. Contact areas ("pads") of approx. 10µm must be able to be approached precisely and with high reproducibility over a "wafer" area of ø300 mm. As the height of these wafers can vary by approx. ±10µm, automatic height correction (Z-profiling) is required. Temperature control of the chuck is necessary.
- Fraunhofer-Gesellschaft - Einkauf B12
Cluster_ALD_PECVD_ICP-CVD (IAF-05.1/05.2/05.3/05.4/05.5) - PR1036076-2050-P
1 piece Cluster_ALD_PECVD_ICP-CVD Fraunhofer IAF plans to purchase a cluster system with ALD, PECVD and ICP-CVD deposition chambers. The system should be suitable for processing 150 mm wafers.
- TEKNOLOGIAN TUTKIMUSKESKUS VTT OYVTTFrist: 29. Mai
Wafer metrology
The object of the tender is semi-automatic wafer metrology tool (later also “tool”) for measurement of total thickness, TTV (total thickness variation), warp, bow, metallization bumps, trench or via depth and geometric factors in substrates typical in semiconductor industry such as but not limited to silicon wafers, chips, stacked wafers, stacked chips, samples containing mixed oxides, or/and thin materials deposited. The tool must be compatible with installation in an ISO 4 classified cleanroom. The object of the tender process is described in more detail in the invitation to tender documents.
- Fraunhofer ENASFrist: 03. Apr.
Stencil Cleaner
"The equipment to be procured should realize solvent based cleaning applications realted to screen and stencil printing. For this purpose, next to cleaning of screen and stencils also additional cleaning application process involved squeegees and substrate are planned in the future and should be possible in principle with optional adapters in the considered epuipment.. Stencil Cleaner
- Fraunhofer ENASFrist: 25. Mai
Stencil Cleaner
"The equipment to be procured should realize solvent based cleaning applications realted to screen and stencil printing. For this purpose, next to cleaning of screen and stencils also additional cleaning application process involved squeegees and substrate are planned in the future and should be possible in principle with optional adapters in the considered epuipment.. Stencil Cleaner
- TEKNOLOGIAN TUTKIMUSKESKUS VTT OYVTTFrist: 09. Mai
Ion beam trimmer
The object of the tender is 200 mm wafer particle beam trimming tool for VTT Micronova cleanroom semiconductor front end processing. The particle beam may be an ion beam, or a gas cluster beam, with a full width at half maximum within 3-15 mm. The tool must be compatible with installation in an ISO 4 classified cleanroom. The object of the tender process is described in more detail in the invitation to tender documents.
- Fraunhofer-Gesellschaft - Einkauf B12
Annealing Furnace (IAF-06.2) - PR1127753-2050-P
1 Stück Annealing Furnace Das Fraunhofer IAF plant die Anschaffung eines Hochtemperatur-Glühofens. Der Temperaturbereich für die thermische Bearbeitung soll von Raumtemperatur bis zu 1000 °C reichen. Das System soll in der Lage sein, 100- und 150-mm-Wafer zu bearbeiten. Die bei Atmosphärendruck verwendeten Prozessgase sind N2 und O2. Option 1: Contamination and particle prevention Option 2: Manual control of heating, cooling and mass flow controllers Option 3: Remote maintenance
- Silicon Austria Labs GmbHGrazFrist: 30. März
Silicon Austria Labs – Chips JU: Single wafer wet clean tool
The aim of this procurement procedure is to award the contract to the best bidder identified during the procurement procedure for the supply, installation, commissioning and services (such as trainings) of a single wafer wet clean tool for Silicon Austria Labs GmbH.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Fraunhofer-Gesellschaft - Einkauf B12.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.