Wafer cleaner / mask cleaner (IAF-08.3) - PR1146362-2050-P
Wafer cleaner / mask cleaner (IAF-08.3) The requirement is for a wafer and mask cleaning machine to be installed in an ISO Class 4 cleanroom and which must comply with European safety regulations for industrial equipment. The system is intended to remove particles and contaminants from wafers and lithography masks usin...
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
Wafer cleaner / mask cleaner (IAF-08.3) The requirement is for a wafer and mask cleaning machine to be installed in an ISO Class 4 cleanroom and which must comply with European safety regulations for industrial equipment. The system is intended to remove particles and contaminants from wafers and lithography masks using aqueous and aci...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: Fraunhofer-Gesellschaft - Einkauf B12
- Veröffentlicht: 30. März 2026
- Frist: Nicht angegeben
Ausschreibungsbeschreibung
Wafer cleaner / mask cleaner (IAF-08.3) The requirement is for a wafer and mask cleaning machine to be installed in an ISO Class 4 cleanroom and which must comply with European safety regulations for industrial equipment. The system is intended to remove particles and contaminants from wafers and lithography masks using aqueous and acidic solutions, based on the RCA cleaning process. To ensure safe operation and a long service life, the process chamber must be made of process-media-resistant material and be equipped with an extraction system and leak detection. The system must be capable of reliably removing particles larger than 250 nm from (quartz) glass or wafers in order to ensure the purity required for the processes in the Fraunhofer IAF cleanroom and not to compromise process yield. Translated with DeepL.com (free version)
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
1 Datei erfasst- Bekanntmachung
Ähnliche Bekanntmachungen
10- Fraunhofer-Gesellschaft - Einkauf B12
Prober 300mm (IAF-09.3) - PR971253-2050-P
2 pieces: Prober 300mm For the automated characterization of circuits in the millimetre wave range up to approx. 250 GHz by means of S-parameter and power measurements, two wafer probers are required that meet the highest requirements for positioning accuracy. Contact areas ("pads") of approx. 10µm must be able to be approached precisely and with high reproducibility over a "wafer" area of ø300 mm. As the height of these wafers can vary by approx. ±10µm, automatic height correction (Z-profiling) is required. Temperature control of the chuck is necessary.
- Fraunhofer-Gesellschaft - Einkauf B12
Cluster_ALD_PECVD_ICP-CVD (IAF-05.1/05.2/05.3/05.4/05.5) - PR1036076-2050-P
1 piece Cluster_ALD_PECVD_ICP-CVD Fraunhofer IAF plans to purchase a cluster system with ALD, PECVD and ICP-CVD deposition chambers. The system should be suitable for processing 150 mm wafers.
- Fraunhofer ENASFrist: 03. Apr.
Stencil Cleaner
"The equipment to be procured should realize solvent based cleaning applications realted to screen and stencil printing. For this purpose, next to cleaning of screen and stencils also additional cleaning application process involved squeegees and substrate are planned in the future and should be possible in principle with optional adapters in the considered epuipment.. Stencil Cleaner
- Fraunhofer-Gesellschaft - Einkauf B12
Annealing Furnace (IAF-06.2) - PR1127753-2050-P
1 Stück Annealing Furnace Das Fraunhofer IAF plant die Anschaffung eines Hochtemperatur-Glühofens. Der Temperaturbereich für die thermische Bearbeitung soll von Raumtemperatur bis zu 1000 °C reichen. Das System soll in der Lage sein, 100- und 150-mm-Wafer zu bearbeiten. Die bei Atmosphärendruck verwendeten Prozessgase sind N2 und O2. Option 1: Contamination and particle prevention Option 2: Manual control of heating, cooling and mass flow controllers Option 3: Remote maintenance
- Silicon Austria Labs GmbHGrazFrist: 30. März
Silicon Austria Labs – Chips JU: Single wafer wet clean tool
The aim of this procurement procedure is to award the contract to the best bidder identified during the procurement procedure for the supply, installation, commissioning and services (such as trainings) of a single wafer wet clean tool for Silicon Austria Labs GmbH.
- University College CorkCorkFrist: 18. Mai
UCC-2025-35 - RFT for the Supply, Delivery, Installation, Commissioning, Calibration, Validation of a Total Reflection X-ray Fluorescence (TXRF) Analysis Spectrometer, for Tyndall National Institute.
University College Cork request the supply of a Total Reflection X-ray Fluorescence (TXRF) Analysis Spectrometer for non-destructive, trace-level wafer surface contamination analysis, with automated handling and rapid full-wafer mapping. The system must support routine monitoring on 100 mm and up to 200 mm wafers and be compatible with bare and processed wafers including thin films, epitaxial layers, and compound semiconductor substrates. The Spectrometer must be suitable for in a research cleanroom environment, with robust software control, recipe management, and data export.
- Fraunhofer-Gesellschaft - Einkauf B12
300mm fully automated high resolution in-line CD and overlay (IZM-133.1) - PR1191754-3460-P
1 piece: 300mm fully automated high resolution in-line CD and overlay (IZM-133.1) The following equipment specification defines the requirements for a fully automated metrology tool to measure overlay and critical dimension (CD) structures on 300 mm and 200 mm wafers, produced using laser direct imaging (LDI) and i-line lithography. This investment expands the metrology capability for automated measurement of smaller feature sizes. The tool is essential for non-destructive characterization of highly integrated, chiplet-based 2.5D/3D and quasi-monolithic package architectures with sub-micrometer feature sizes. The equipment is compatible with 3D wafer stacks exhibiting high warp/bow. Wafer substrates are silicon and/or glass, with thicknesses up to 2.5 mm. Before processing, wafers are delivered to the tool in front-opening unified pods (FOUPs), which the operator manually places on the respective load ports. The new tool must be able to perform the following sequence of steps fully automatically: - Load designated wafers from the FOUP(s) - Execute metrology tasks - Return wafers to their original positions in the FOUP(s) Recipe programming must support a sufficiently wide range of options and parameters to meet research and development (R&D) needs. It is required that the equipment continuously performs the intended functions without interruptions or failures, in accordance with all requirements specified in this document. Furthermore, the equipment must be supplied with all items described below that are necessary for it to deliver the intended functions and capabilities in compliance with all requirements set out in this document.
- HUS-yhtymäVantaa
HUS 363-2025 Radiotherapy immobilization masks
The HUS Group requested tenders for Radiotherapy immobilization masks. The procurement includes the following product groups: 1. Masks for radiotherapy immobilization 2. Anterior open-view mask with posterior mask for radiotherapy immobilization The products are described in more detail in the attached annex 1 Product and price form HUS 363-2025 in the invitation to tender. The goal of this competitive procurement is to get products that are safe to use and also to have products available when they are needed. The subject matter of the procurement also includes additional products related to the products tendered, such as masks for other body parts and base plates and other accessories, which are indicated in product attachment 1. In addition, during the contract period, products belonging to the product groups that are the subject of the contract, may be acquired in accordance with the estimated value of the contract, also when they are not specified in the product annex (please see draft agreement, annex 2). Contract period is 2 years and after that effective until further notice. This is carried out as a joint procurement. The products requested in this invitation to tender will be used by: HUS Group (HUS) and Kymenlaakso Welfare Area. The total estimated value of the procurement (VAT 0%) is approximately EUR 400 000. This is an estimate and the contracting entity does not commit neither to the stated euro amounts and nor the consumption figures indicated in the invitation to tender. The final order quantities may be higher or lower than stated. The subject matter and requirements of the procurement are described in detail in the invitation to tender and its annexes.
- DomstoladministrasjonenTRONDHEIM
e-recruitment system
The Norwegian Courts Administration (DA) intends to enter into an agreement with one tenderer for the use of a e-recruitment system (recruitment tool) for the Norwegian Courts Administration. The Norwegian Courts Administration is in need of a user friendly recruitment tool that supports the entire recruitment process, from publication and application management to communication, employment and documentation. The tool shall contribute to good candidate experience, streamlining of processes and ensure good compliance with rules and internal routines.
- Fraunhofer-Gesellschaft - Einkauf B12
CD-SEM Measurement System (IPMS-MRS03.1) - PR884397-2480-P
1 CD-SEM Measurement System Requirements for top-down measurement of critical dimensions of lines/spaces, holes/columns and other fine features, such as elongated hile/pillar patterns formed on semiconductor wafers during wafer fabrication, using a high-throughput CD-SEM. The system is used for processing MEMS wafers in a CMOS-compatible clean-roam class 10 (approx. ISO 4) production environment. Optional service items: 1.15 General requirements The system is equipped with an uninterruptible power supply (UPS). Yes 3.3 Measurement system The traceable certified standard is part of the delivery. The calibrations are not older than 20% of the recommended calibration interval at the time of delivery. Note: A traceable certified standard can be provided by the supplier. Otherwise, Fraunhofer IPMS will provide a VLSI-certified standard. Yes 4.16 Process The system is capable of performing 3D measurements using a tilted beam. Yes 4.17 Process The system can detect and visualize backscattered electrons (BSE). It is possible to perform CD measurements on the BSE image. Yes 8.2 Optional tool features Please provide an offer for a set of consumables (lamps, O-rings, valves, etc.). Yes 8.4 Optional tool features Please provide a separate offer for typical spare parts such as axis encoder, laser interferometer, etc. Yes 11.4 Extended Warranty Should offered extended warranty starting from the date on which the statutory warranty expires. An extended warranty of further 12 months should be offered. During the warranty period all support, repair and parts cost should be covered. 12 months
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Fraunhofer-Gesellschaft - Einkauf B12.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.