ICP Trockenätzanlage Chlor IV (IAF-07b1) - PR1119209-2050-P
1 piece Chlorine ICP Chlorine ICP etching system with planar plasma source The etching processes developed and qualified at the IAF for structuring must be directly reusable on the new system and deliver corresponding etching results, as with the etching system currently in use (Sentech ICP-RIE SI500 537). These known ...
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
1 piece Chlorine ICP Chlorine ICP etching system with planar plasma source The etching processes developed and qualified at the IAF for structuring must be directly reusable on the new system and deliver corresponding etching results, as with the etching system currently in use (Sentech ICP-RIE SI500 537). These known processes should ...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: Fraunhofer-Gesellschaft - Einkauf B12
- Veröffentlicht: 29. April 2026
- Frist: Nicht angegeben
- Thema: Kompressoren
Ausschreibungsbeschreibung
1 piece Chlorine ICP Chlorine ICP etching system with planar plasma source The etching processes developed and qualified at the IAF for structuring must be directly reusable on the new system and deliver corresponding etching results, as with the etching system currently in use (Sentech ICP-RIE SI500 537). These known processes should be transferable to wafer sizes of 150 mm. Options: Substrate electrode Option to etch wafers with a diameter of 100 mm (flat) and fragments on metal carriers. Substrate electrode Option to etch 75 mm diameter wafers (flat) and fragments on metal carriers. Process chamber Heated liner Service Extended warranty Spare parts kit Gas ring Spare parts kit MVV measuring tube Spare parts kit Silencer and protective cover for lock pump Spare parts kit Turbo pump for lock Spare parts kit Coupling plate without window Spare parts kit Clamping for 150 mm wafers with notch Spare parts kit Julabo recirculating cooler as replacement Spare parts kit PLC control unit (CPU / RFC) Translated with DeepL.com (free version)
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
1 Datei erfasst- Bekanntmachung
Ähnliche Bekanntmachungen
7- Fraunhofer-Gesellschaft - Einkauf B12
Plasmasystem (IZM-115.1) - PR1115793-2590-P
1 piece: Plasmasystem (IZM-115.1) The formation of very fine RDLs (redistribution layers) < 5 µm on large organic substrates requires the replacement of wet-chemical processes by dry-etching. Due to the strongly anistropic character of plasma etching an undercut of the fine Cu line can be avoided, opening the way to structures of 2 µm and below. The plasma tool for panel up to 600mm will be a ICP system with yery high etch rates for organic materials like photoresists and ABF. In contrast to the existing plasma system, optimized for precise metal etching, the new ICP tool will allow development and use of very fast etching cycles, compatible with industrial processes.
- Fraunhofer-Gesellschaft - Einkauf B12
Cluster_ALD_PECVD_ICP-CVD (IAF-05.1/05.2/05.3/05.4/05.5) - PR1036076-2050-P
1 piece Cluster_ALD_PECVD_ICP-CVD Fraunhofer IAF plans to purchase a cluster system with ALD, PECVD and ICP-CVD deposition chambers. The system should be suitable for processing 150 mm wafers.
- Fraunhofer-Gesellschaft - Einkauf B12
Wafer cleaner / mask cleaner (IAF-08.3) - PR1146362-2050-P
Wafer cleaner / mask cleaner (IAF-08.3) The requirement is for a wafer and mask cleaning machine to be installed in an ISO Class 4 cleanroom and which must comply with European safety regulations for industrial equipment. The system is intended to remove particles and contaminants from wafers and lithography masks using aqueous and acidic solutions, based on the RCA cleaning process. To ensure safe operation and a long service life, the process chamber must be made of process-media-resistant material and be equipped with an extraction system and leak detection. The system must be capable of reliably removing particles larger than 250 nm from (quartz) glass or wafers in order to ensure the purity required for the processes in the Fraunhofer IAF cleanroom and not to compromise process yield. Translated with DeepL.com (free version)
- Fraunhofer-Gesellschaft - Einkauf B12
Wafer cleaner / mask cleaner (IAF-08.3) - PR1146362-2050-P
Wafer cleaner / mask cleaner (IAF-08.3) The requirement is for a wafer and mask cleaning machine to be installed in an ISO Class 4 cleanroom and which must comply with European safety regulations for industrial equipment. The system is intended to remove particles and contaminants from wafers and lithography masks using aqueous and acidic solutions, based on the RCA cleaning process. To ensure safe operation and a long service life, the process chamber must be made of process-media-resistant material and be equipped with an extraction system and leak detection. The system must be capable of reliably removing particles larger than 250 nm from (quartz) glass or wafers in order to ensure the purity required for the processes in the Fraunhofer IAF cleanroom and not to compromise process yield. Translated with DeepL.com (free version)
- Fraunhofer-Gesellschaft - Einkauf B12
300mm fully automated high resolution in-line CD and overlay (IZM-133.1) - PR1191754-3460-P
1 piece: 300mm fully automated high resolution in-line CD and overlay (IZM-133.1) The following equipment specification defines the requirements for a fully automated metrology tool to measure overlay and critical dimension (CD) structures on 300 mm and 200 mm wafers, produced using laser direct imaging (LDI) and i-line lithography. This investment expands the metrology capability for automated measurement of smaller feature sizes. The tool is essential for non-destructive characterization of highly integrated, chiplet-based 2.5D/3D and quasi-monolithic package architectures with sub-micrometer feature sizes. The equipment is compatible with 3D wafer stacks exhibiting high warp/bow. Wafer substrates are silicon and/or glass, with thicknesses up to 2.5 mm. Before processing, wafers are delivered to the tool in front-opening unified pods (FOUPs), which the operator manually places on the respective load ports. The new tool must be able to perform the following sequence of steps fully automatically: - Load designated wafers from the FOUP(s) - Execute metrology tasks - Return wafers to their original positions in the FOUP(s) Recipe programming must support a sufficiently wide range of options and parameters to meet research and development (R&D) needs. It is required that the equipment continuously performs the intended functions without interruptions or failures, in accordance with all requirements specified in this document. Furthermore, the equipment must be supplied with all items described below that are necessary for it to deliver the intended functions and capabilities in compliance with all requirements set out in this document.
- Fraunhofer-Gesellschaft - Einkauf B12
CD-SEM Measurement System (IPMS-MRS03.1) - PR884397-2480-P
1 CD-SEM Measurement System Requirements for top-down measurement of critical dimensions of lines/spaces, holes/columns and other fine features, such as elongated hile/pillar patterns formed on semiconductor wafers during wafer fabrication, using a high-throughput CD-SEM. The system is used for processing MEMS wafers in a CMOS-compatible clean-roam class 10 (approx. ISO 4) production environment. Optional service items: 1.15 General requirements The system is equipped with an uninterruptible power supply (UPS). Yes 3.3 Measurement system The traceable certified standard is part of the delivery. The calibrations are not older than 20% of the recommended calibration interval at the time of delivery. Note: A traceable certified standard can be provided by the supplier. Otherwise, Fraunhofer IPMS will provide a VLSI-certified standard. Yes 4.16 Process The system is capable of performing 3D measurements using a tilted beam. Yes 4.17 Process The system can detect and visualize backscattered electrons (BSE). It is possible to perform CD measurements on the BSE image. Yes 8.2 Optional tool features Please provide an offer for a set of consumables (lamps, O-rings, valves, etc.). Yes 8.4 Optional tool features Please provide a separate offer for typical spare parts such as axis encoder, laser interferometer, etc. Yes 11.4 Extended Warranty Should offered extended warranty starting from the date on which the statutory warranty expires. An extended warranty of further 12 months should be offered. During the warranty period all support, repair and parts cost should be covered. 12 months
- Dublin City CouncilDublin
Dublin City Council is establishing a single-operator framework agreement for the supply and delivery of sub compact and compact sweepers, as well as winter maintenance vehicles (3 Lots)
Dublin City Council is establishing a single operator framework agreement for the supply and delivery of sub compact and compact sweepers, as well as winter maintenance vehicles, to meet current and emerging operational needs associated with cycle lane cleaning and winter road maintenance across the Council’s administrative area. The framework will operate for a period of four years from the date of award, with an indicative total value of €2.5 million (ex VAT) across all lots. The initial phase value is €800,000 in the first year, with options to extend or issue further allocations as funding becomes available. This value is provided strictly for indicative purposes and does not represent a commitment to purchase any specific quantity or to exhaust the full amount. Actual drawdown will depend on operational requirements, available funding and performance of the awarded suppliers. The tender is divided into three lots to reflect both operational needs and environmental priorities. Lot 1 covers diesel sub compact sweepers, with approximately up to four (4) units expected to be procured and provision for future expansion. Lot 2 covers electric compact sweepers, with between two (2) and six (6) units expected to be procured and provision for future expansion. Lot 3 covers diesel winter maintenance sub compact vehicles, with between two (2) and four (4) units expected to be procured and provision for future expansion. For Lot 1 and Lot 3, the maximum permitted vehicle width is 1100 mm, while for Lot 2 the maximum permitted width is 1200 mm. Vehicles proposed under Lot 3 must be capable of winter treatment functions such as salt spreading on narrow cycle lanes and restricted routes. They must also be adaptable to a brine system in the future, as the methodology for winter road treatment is currently under review. An adjustable salt spreading width, ideally ranging from 1.1 metres to 4 metres, is required. Contractual requirements include a minimum one year full warranty from the vehicle or sweeper manufacturer. The framework does not include the supply of non warranty spare parts or diagnostics. Tenderers must deliver the vehicles within 22 weeks from contract award, with up to two additional weeks allowed for on site operator training where required. All vehicles will have to be delivered to Dublin City Council’s North City Operations Depot (NCOD), St. Margaret’s Road, Ballymun, Dublin 11. Evaluation will include provisional scoring at the evaluation meeting, followed by an on-site trial and inspection of the highest-ranked tenderer to verify compliance. Scores may be adjusted if specifications are not met, and inspections will continue in rank order until complete. Once final evaluations are confirmed, letters will issue, and after the standstill period, the contract may be awarded. The inspection process is integral to the overall evaluation. A full list of technical and performance requirements is provided in Appendix A – Fitness for Purpose. For further information please refer to documentation available to download from www.etenders.gov.ie Resource ID xxxxxxx – Input when notice created . Please note that this project is subject to funding.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Fraunhofer-Gesellschaft - Einkauf B12.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.