Laser Frequency Comb for 2ES
DTU will like to buy a Laser Frequency Comb for 2ES (The Second Earth Spectrograph). The Second Earth Spectrograph (2ES) is a next-generation extreme-precision radial velocity spectro-graph that will be installed at the MPG/ESO 2.2m Telescope on La Silla, Chile (Southern Hemisphere). 2ES will be dedicated to a > 5-year...
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
DTU will like to buy a Laser Frequency Comb for 2ES (The Second Earth Spectrograph). The Second Earth Spectrograph (2ES) is a next-generation extreme-precision radial velocity spectro-graph that will be installed at the MPG/ESO 2.2m Telescope on La Silla, Chile (Southern Hemisphere). 2ES will be dedicated to a > 5-year observing progra...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: Danmarks Tekniske Universitet - DTU
- Veröffentlicht: 27. April 2026
- Frist: Nicht angegeben
Ausschreibungsbeschreibung
DTU will like to buy a Laser Frequency Comb for 2ES (The Second Earth Spectrograph). The Second Earth Spectrograph (2ES) is a next-generation extreme-precision radial velocity spectro-graph that will be installed at the MPG/ESO 2.2m Telescope on La Silla, Chile (Southern Hemisphere). 2ES will be dedicated to a > 5-year observing program with access to the majority (2/3) of the tele-scope time with the goal of discovering temperate terrestrial Earth-mass planets in the habitable zone around the brightest solar-type stars in the sky. In order to achieve the extreme precision needed for 2ES to complete its science objectives, a Laser Frequency Comb (LFC) calibration source is crucial in order to be able to calibrate the spectrograph to achieve the extreme precision of 10 cm/s over many years of operation. The LFC must cover the entire wavelength range of 2ES (370 nm to 870 nm) and have comb lines at appropriate spacing (see requirements) and have extreme stability (see requirements). The LFC must be able to function in a as-tronomical observing environment, be remotely operatable and be also to sustain a significant uptime at the astronomical telescope.
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
10- Danmarks Tekniske Universitet - DTUKgs. LyngbyFrist: 31. März
Laser Frequency Comb for 2ES
Beschaffung einer Laser Frequency Comb (LFC) als Kalibrationsquelle für das Spektrographen 2ES am MPG/ESO 2.2m Teleskop auf La Silla, Chile. Das LFC muss den Wellenlängenbereich 370 nm bis 870 nm abdecken, geeignete Komb-Linienabstände und extreme Stabilität aufweisen, für den astronomischen Observierungsbetrieb geeignet sein, fernbedienbar sein und eine hohe Betriebszeit am Teleskop gewährleisten. Zweck ist die Kalibration zur Erreichung einer radialen Präzision von 10 cm/s über mehrere Jahre zur Entdeckung erdähnlicher Planeten.
- Danmarks Tekniske Universitet - DTUKgs. Lyngby
A High repetition rate dual-comb tunable OPO with integrated pump laser
DTU requires the delivery of a turnkey, highly stable, and mutually coherent dual-comb light source with a broad spectral tuning range covering the near- to mid-infrared. The system shall be capable of generating femtosecond pulses at high repetition rates. The proposed solution shall consist of a tunable optical parametric oscillator (OPO) pumped by a dual-comb laser. The OPO shall provide continuous spectral coverage in the mid-infrared range from 2300 nm to 4200 nm and in the near-infrared range from 1500 nm to 1700 nm, while simultaneously providing output of the pump dual-comb. The system shall be installed at DTU Electro within the Optical Sensor Technology group. The delivered solution shall be fully integrated, user-friendly, and suitable for operation by multiple users. It shall support a wide range of applications, including but not limited to precision molecular sensing, rapid pump-probe analysis, hyperspectral imaging, and advanced semiconductor and photonic chip characterization.
- Fraunhofer-Gesellschaft - Einkauf B12
Frequency range extension modules for millimetre-wave network analysis (FHR-01) - PR926511-P
1 x frequency range extension module for millimetre-wave network analysis To expand a millimetre-wave measurement system, millimetre-wave frequency extension modules (so-called 'extenders’), 2-port waveguide calibration sets and reference horn antennas are to be procured. The frequency range extension modules will be used in conjunction with an existing Keysight PNA-X N5247B vector network analyser (not included in the scope of supply) to perform millimetre-wave network analysis. The extension modules must be compatible with a Keysight N5292A mm-wave test set controller (not included in the scope of supply); the relevant adapter cables are listed in LV Item 4.1.
- Sporveien ASOsloFrist: 20. Mai
RFI - Compressor module for MX3000 Metro
The main purpose of this RFI process is thus to gather the information necessary to be able to ask for the right solutions and have a realistic budget and timeframe in the upcoming purchase process.
- Helmholtz-Zentrum Dresden-Rossendorf e.V.Frist: 27. Mai
Femtosecond Laser System
The requested laser system is an essential component of the terahertz (THz) user facility TELBE at the ELBE Center for High-Power Radiation Sources at the HZDR. At this facility, intense THz pulses from an accelerator-based source are used to excite various kinds of sample materials; the THz-driven dynamics are then probed using optical methods based on ultrashort (femtosecond), intense, carefully tailored and synchronized light pulses. The requested laser infrastructure will serve as the main probe laser with versatile parameters and output options. This laser infrastructure will also serve various purposes apart from probing, such as providing a timing reference, additional optical pump capabilities for 2D spectroscopy experiments. The laser system must consist of the following main components: A) Femtosecond laser oscillator B) Laser amplifier C)Optical parametric amplifier D) Mid-infrared (MIR) source. Beside the fulfillment of the criteria described under 2. Performance quote of Annex 01A, the scope of deliveries and services includes: - delivery at the place of performance - laser installation infrastructure (electricity, cooling water, and optical table) will be provided by HZDR - suitable laser chillers (water-water) included in the delivery - site acceptance test (SAT) - user documentation in English - a 12-month warranty on the entire laser system, including all necessary components, from the date of acceptance (SAT), but no later than 3 months after delivery if acceptance is delayed for reasons beyond the contractor’s control - CE conformity - on-site user training for at least two users
- Danmarks Tekniske Universitet - DTUKgs. Lyngby
DUV Stepper
To ensure the continuation of small and medium sized companies chip production and development in Danmark DTU Nanolab want to purchase a new (non-refurbished) DUV stepper using a 248 nm wavelength laser as illumination source (KrF laser unit from CYMER). It must furthermore be possible to handle several different wafer types and sizes: Wafer materials: Silicon, LNOI, Borofloat, quartz, III-V Wafer sizes in diameter: 100mm, 150mm and 200mm, furthermore it must be equipped with a multi wafer handl
- Office of Public Works (OPW)TrimFrist: 17. März
Supply of Public Announcement System for Dublin Castle
In summary, the Goods comprise: The supply and delivery of to design, specify and supply a suitable audio system for installation in George’s Hall, Bedford Hall, and St Patricks Hall in Dublin Castle. A fourth system will be mobile and deployed in various rooms within Dublin Castle. All speakers must be mutually compatible and from the same manufacturer. All amplifiers must be designed for the speakers provided and have integrated DSP.
- Atlantic Technological UniversityLetterkenny
Atlantic Technological University - Request for Tender for the provision of Surface Grinders
Atlantic Technological University is seeking to purchase five new manual surface grinders suitable for precision machining in a training environment. The equipment will be used for training Toolmaking Apprentices at ATU Sligo campus. The equipment must be delivered and fully commissioned by 21st August 2026. Full details, requirements and specifications are included in the published tender documents.
- SETESDAL MILJØ & GJENVINNING IKSEvje
Procurement of a press for waste management
The contracting authority intends to enter into a contract for the procurement of a press with automatic binding for use in waste management. The press can be offered with or without feeding band, as the feed band is a voluntary option. The press shall as a minimum be able to be used for compressing and bundling paper, cardboard and plastic packaging. It is desirable that the offered press can also press hard plastic and agricultural plastic. Other fractions can also be relevant based on what the offered equipment is suitable for. The press shall have a minimum of 60 tonnes of press power. Tenderers must describe their assessments and state the reference facilities in their tender offer.
- Alta kommuneAltaFrist: 22. Mai
Office Furniture Framework Agreement
Alta municipality invites tenderers to an open tender contest without negotiations for a framework agreement for the procurement of furniture and fixtures for offices. The aim is to establish a framework agreement with a furniture supplier who ensures access to environmentally friendly furniture of high quality, with a focus on sustainability and that has a long lifetime. The offered products shall have good functionality and user friendliness, and be suitable for the public entities included in this agreement. Furthermore, the products must have a clean and timeless design that fits into every working environment. The products shall be universally designed, i.e. the products for general use shall be designed so that all persons shall be able to use them. Furthermore, the products shall have good ergonomics and comfort. The contract shall be valid for 2 years, with an option for an extension for one year at a time for a further two years. See the tender documentation for further information.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Danmarks Tekniske Universitet - DTU.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.