A High repetition rate dual-comb tunable OPO with integrated pump laser
DTU requires the delivery of a turnkey, highly stable, and mutually coherent dual-comb light source with a broad spectral tuning range covering the near- to mid-infrared. The system shall be capable of generating femtosecond pulses at high repetition rates. The proposed solution shall consist of a tunable optical param...
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
DTU requires the delivery of a turnkey, highly stable, and mutually coherent dual-comb light source with a broad spectral tuning range covering the near- to mid-infrared. The system shall be capable of generating femtosecond pulses at high repetition rates. The proposed solution shall consist of a tunable optical parametric oscillator ...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: Danmarks Tekniske Universitet - DTU
- Veröffentlicht: 27. April 2026
- Frist: Nicht angegeben
Ausschreibungsbeschreibung
DTU requires the delivery of a turnkey, highly stable, and mutually coherent dual-comb light source with a broad spectral tuning range covering the near- to mid-infrared. The system shall be capable of generating femtosecond pulses at high repetition rates. The proposed solution shall consist of a tunable optical parametric oscillator (OPO) pumped by a dual-comb laser. The OPO shall provide continuous spectral coverage in the mid-infrared range from 2300 nm to 4200 nm and in the near-infrared range from 1500 nm to 1700 nm, while simultaneously providing output of the pump dual-comb. The system shall be installed at DTU Electro within the Optical Sensor Technology group. The delivered solution shall be fully integrated, user-friendly, and suitable for operation by multiple users. It shall support a wide range of applications, including but not limited to precision molecular sensing, rapid pump-probe analysis, hyperspectral imaging, and advanced semiconductor and photonic chip characterization.
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
10- Danmarks Tekniske Universitet - DTUKgs. Lyngby
Laser Frequency Comb for 2ES
DTU will like to buy a Laser Frequency Comb for 2ES (The Second Earth Spectrograph). The Second Earth Spectrograph (2ES) is a next-generation extreme-precision radial velocity spectro-graph that will be installed at the MPG/ESO 2.2m Telescope on La Silla, Chile (Southern Hemisphere). 2ES will be dedicated to a > 5-year observing program with access to the majority (2/3) of the tele-scope time with the goal of discovering temperate terrestrial Earth-mass planets in the habitable zone around the brightest solar-type stars in the sky. In order to achieve the extreme precision needed for 2ES to complete its science objectives, a Laser Frequency Comb (LFC) calibration source is crucial in order to be able to calibrate the spectrograph to achieve the extreme precision of 10 cm/s over many years of operation. The LFC must cover the entire wavelength range of 2ES (370 nm to 870 nm) and have comb lines at appropriate spacing (see requirements) and have extreme stability (see requirements). The LFC must be able to function in a as-tronomical observing environment, be remotely operatable and be also to sustain a significant uptime at the astronomical telescope.
- Helmholtz-Zentrum Dresden-Rossendorf e.V.Frist: 27. Mai
Femtosecond Laser System
The requested laser system is an essential component of the terahertz (THz) user facility TELBE at the ELBE Center for High-Power Radiation Sources at the HZDR. At this facility, intense THz pulses from an accelerator-based source are used to excite various kinds of sample materials; the THz-driven dynamics are then probed using optical methods based on ultrashort (femtosecond), intense, carefully tailored and synchronized light pulses. The requested laser infrastructure will serve as the main probe laser with versatile parameters and output options. This laser infrastructure will also serve various purposes apart from probing, such as providing a timing reference, additional optical pump capabilities for 2D spectroscopy experiments. The laser system must consist of the following main components: A) Femtosecond laser oscillator B) Laser amplifier C)Optical parametric amplifier D) Mid-infrared (MIR) source. Beside the fulfillment of the criteria described under 2. Performance quote of Annex 01A, the scope of deliveries and services includes: - delivery at the place of performance - laser installation infrastructure (electricity, cooling water, and optical table) will be provided by HZDR - suitable laser chillers (water-water) included in the delivery - site acceptance test (SAT) - user documentation in English - a 12-month warranty on the entire laser system, including all necessary components, from the date of acceptance (SAT), but no later than 3 months after delivery if acceptance is delayed for reasons beyond the contractor’s control - CE conformity - on-site user training for at least two users
- Oslo kommune v/ Bydel GrünerløkkaOsloFrist: 13. Mai
Day centre transport by minibus of persons with dementia and disabilities.
PURPOSE AND SCOPE The aim of the procurement is to cover the need for transport services, including drivers and auxiliary zones, to and from day activities and senior centre offers in the district. There are 19 people with normal driving who need daily transport. This can be changed over time and changes will be reported once per ocean year. The maximum number of persons will not exceed 25. All transport shall be carried out by vehicles that are powered with electricity or hydrogen in order to reduce CO2 emissions and contribute to Oslo municipality ́s green profile. From 01.01.2025, all deliveries/assignments for Oslo municipality where transport is a part of the service, shall be undertaken by using zero emission (i.e. battery electric or hydrogen) or biogas technology that as a minimum fulfils euro class 6/ VI. The contract has an annual estimated value of NOK 1,500,000. The contracting authority draws attention to the fact that the estimate is based on previous consumption, historical data and the expected future need. This contract is valid for up to a maximum value of NOK 6,000,000, including any option for a 2 year extension. The estimate is only a guideline and is without obligation for the Contracting Authority. Transport of up to 19 people with up to 4 wheelchair users is required. The number can be changed with each new order made every six months. The change can be both a reduction of persons with a need for changing the number of wheelchair users, changing the number that shall be transported in the form of reduction and increase. An increase will normally not be more than 2 - 3 persons. The contracting authority envisages that two vehicles will be used for the assignment. According to the oslo municipality's rules, none of the vehicles can use fuel that is used. In addition to the drivers, the tenderer must offer a permanent person/helper who shall assist in transporting the users. An attendant from the day centre will also assist with the transport. The urban district orders day centre places every half year according to the district ́s need, and the district will notify the carrier of any changes when the order is made. The district has a maximum need of 12 places at Sofienberg day centre plus an attendant from the day centre and 7 at Økern day centre plus an attendant from the day centre. However, this may change over time. See the description of changes to the number of persons with a need for transport in point one. In total, Økern day centre has day places for 7 users with dementia, and Sofienberg day centre has day places for 12 users. The users shall be picked up and delivered all business days outside of Saturday and Sunday. Tenderers shall ensure daily transport of elderly persons between their residence and the following two day centres: Økern Day Centre (Kingosgate Residential and Rehabilitation Centre), Kingosgate 14-16 Sofienberg day centre (sofienberg centre), Helgesensgate 62. To and from Økern Day Centre: · 08:30 with 1 bus that picks up day centre users at their homes and drives them to the day centre within approx. 09:00. They will not be picked up at home until 08:30. · At 14:00, one bus will be picked up for the same people at the day centre and drive them home. To and from Sofienberg day centre · 09:00 with 1 bus that picks up day centre users at their homes and drive them to the day centre within approx. 10.00. · At 14:45 a.m., one bus will pick up the same people at the day centre and drive them home. There are up to 19 persons each day who shall be picked up and driven to the day centre. The number of persons going to Økern day centre and Sofienberg day centre will vary. The parties to the contract can reach agreement on other times. If the opening hours are changed, the date of transport to and from can be changed accordingly. Both centres are closed on weekends, public holidays, Christmas Eve and New Year's Eve. Before the assignment, employees at the day centres will make the tenderer aware of the needs of each user so that the transport can be adapted to this. It can, for example, be whether the user uses a wheelchair, type of wheelchair, any need for stair climbers, a need to be followed to the entrance door etc. Tenderers will get lists from the day centres with an overview of each user, addresses, any changes to lists and other necessary information about users. There will be some waiting time for the collection, as users may not always be ready on time. The users who use the tender will vary, and for this reason there will be some variation in which addresses the drivers shall collect and deliver users from. Not all users are able to walk by their own help with the vehicles. It is therefore necessary that the users are picked up as close to the entrance door as possible. Some users also have dementia and must be followed to/from a vehicle and their own home.
- University of Limerick_1124Limerick
University of Limerick Main Building Blocks C, D and E - Medium Retrofit with High Temperature Air Source Heat Pump
University of Limerick (UL) (the ‘Authority) wishes to appoint a Design Team via a single stage, open competition for the proposed University of Limerick Main Building Blocks C, D and E - Medium Retrofit with High Temperature Air Source Heat Pump under Higher Education Energy Efficiency and Decarbonisation Pathfinder Programme 2023 (the “Project”) at University of Limerick. Further details regarding the project are provided below. This Project Information Memorandum should be read in conjunction
- Statens vegvesenMossFrist: 22. Mai
National road 426 Eigerøy bridge
The main aim of the project is to replace the current Eigerøy bridge with a new bridge which shall be constructed parallel to the south side of the existing one. When the new bridge is finished, shall the old one be demolished. In addition a foot and cycle path shall be established south along the Hovlandsveien, on the current national road 426. Associated roads in the area shall also be upgraded in order to ensure comprehensive improvement of the infrastructure. New Eigerøy Bridge * The new Eigerøy bridge shall be constructed on the south side of the existing bridge. When the new the bridge has been completed, the old bridge shall be demolished. The new bridge is planned as a type of "Concrete slab bridge with blasted columns" with a length of approx. 272 m. * The bridge should typically have a total width of 13.6 m. * The sailing rectangle shall be (HxB) 22.5 m in 23.5 m. Other constructions * New culvert Lauåsen internal dimension (BxH) 3.5 m x 3.1 m * Support construction along Hovlandsvegen * Retaining wall and support construction at Hovlandsvegen 7 and 9 * Retaining wall along Old Eigerøyveien. * Other minor walls and support structures uncovered by the engineering design. need for. A new foot and cycle path shall be constructed as the main solution for walking and cycling. Some parts of the stretch will have pavements. * A new three-armed roundabout shall be constructed at Eigerøy. * The public transport stops along the stretch shall be upgraded to universal design and be equipped with shelters for better comfort and accessibility. * A new national road 426 shall be constructed on the east side of the new bridge, approx. 200 m eastwards. * Approx. 230 m new exit and local road from Langholmveien shall be constructed. Along Hovlandsveien * Along Hovlandsveien, National Road 426, a new foot and cycle path shall be constructed on the east side from the junction with Nyåskaiveien to the new Eigerøy bridge. This road shall connect on foot and cycle paths on the new bridge. The foot and cycle path is approx. 750 m long. The width of the new foot and cycle path varies between 2.5 and 3.0 m plus the shoulder and railing room. * The farthest south continues the current foot and cycle path on the west side of Hovlandsveien up to the existing pedestrian crossing at the public transport stops. See the tender documentation for detailed information on the contract work.
- ForsvarsbyggOSLOFrist: 01. Juni
The Norwegian Defence Estates Agency invites tenderers to a competitive dialogue - Procurement of a MOM system with the accompanying assistance for implementation.
The Norwegian Defence Estates Agency invites tenderers to submit an application for prequalification for a competitive dialogue (two stage procedure), for the following services/projects: Project number 130011 - Procurement of system support for AOM/EAM processes, including implementation assistance. The qualification phase the competition starts with a qualification phase, where all interested tenderers can submit a request to participate up until the deadline stated in the schedule. The enquiry shall be submitted in accordance with the descriptions in this document and the stated qualification requirements that shall be answered. The contracting authority will assess the tenderers ́ qualifications and check that there are no reasons for rejection. Only qualified tenderers can be invited to participate in the dialogue phase. The dialogue phase only qualified tenderers who are invited by the contracting authority will be able to participate in the dialogue. The objective of the dialogue phase is to identify and define how the contracting authority ́s needs can best be fulfilled. The dialogue can be conducted on all sides of the procurement. The contracting authority will request a solution proposal through the dialogue, based on the contracting authority ́s needs. The Norwegian Defence Estates Agency has attached various documents that will be used as a starting point when, together with the qualified tenderers, the dialogue (the next phase) shall present a complete tender documentation.
- Statens vegvesenMoss
Establishment, operation and maintenance of a 24 hour resting place for heavy transport along the E18 stretch Asker-Sande.
The contracting authority invites tenderers to a competition for the establishment, operation and maintenance of 24 hour resting place(s) along the E18 stretch Asker-Sande. The driving distance from the E18 to the entrance for the actual 24 hour resting place shall be a maximum of 2 km. The contracting authority needs approx. 100 placement places on the stretch. It may be necessary to enter into a contract with several tenderers and/or divide the procurement into different sub-contracts. Each individual 24 hour resting place shall as a minimum have parking places for 15 wagon trains and shall include a service facility with toilets, showers, living rooms and charging stations. Otherwise, the 24 hour resting place shall fulfil the shall-requirements listed in point 3.2. The Contracting Authority prefers large 24 hour resting places and 24 hour resting places that are located on the stretch between Asker-Drammen. The 24 hour resting place shall be ready for opening by 01.09.2027 at the latest and the contract will be valid for ten years from the opening hours. The contracting authority has the option to extend the contract for 1+1 year, so that the total possible lease period is 12 years. The contracting authority will set up a scheme with payment for annual rent, which shall include establishment, as well as operation and maintenance of the 24 hour resting place.
- INNLANDET FYLKESKOMMUNEHAMARFrist: 21. Mai
Furniture (competition documents for a hearing)
The Contracting Authority hereby sends proposed competition documents for a hearing. The aim of the hearing is to obtain input from the market before the final announcement.nnlandet county is planning to procure furniture for office and school buildings at all of the county ́s locations, and the contracting authority would like furniture adapted to high quality public use, long lifetime (15-20 years), universal design and systems that facilitate efficient cleaning. Emphasis will be put on standardisation, predictable costs and future orientated systems that provide high user satisfaction. The contracting authority would like to reduce internal resource use by increasing the degree of self-service, efficient ordering systems and good schemes for service, maintenance and repairs. Sustainability is a central consideration, and inland county would like a minimum of 25% used furniture, with the ambition to increase the share during the contract period. The tenderer shall contribute to internal re-use, disposal as needed and deliver a high level of service and maintenance services. Deadline for input: 01.05.2026.
- Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH
81319268-Cooperative and Short-Term Trainings and Capacity Building Measures in Ethiopia
The focus of both long-term cooperative training and short-term demand-oriented training measures would be on green, digital and social transformation and entrepreneurial skills with active involvement of the companies. The work packages are as follows, and details are available in the ToR. WP 1: Establishment of regional and sectoral implementation plans and coordination mechanisms, reflecting cooperation between public and private sector The aim of WP1 is to engage with all relevant stakeholders/actors from the public and private sector, to set up an implementation structure for all activities within this consultancy. In implementation of city administrations/regions, the (re)establishment of platforms coordinating the CT and short-term training programme implementation shall be facilitated by the contractor. If suitable, existing forums/platforms shall be used. The contractor is responsible for organising regular exchanges. The contractor shall secure the engagement of at least 30 influential large companies (champions) to ensure effective implementation of cooperative training and selection of job seekers as well as informally employed people for short-term qualification measures / trainings. WP 2: (Re)-design and developing cooperative training implementation packages in selected economic sectors Based on the selected job profiles/occupations and levels, the contractor shall support MoLS, Regional TVT bureaus, ECCSA, sectorial associations, companies and other relevant public and private stakeholders/actors to (re)design and develop Cooperative Training Programmes to TVT college trainees. The Programmes shall significantly contribute to the increased employability of trainees with an in-company training time of at least 70 %. The aim is to define training programmes, covering all relevant aspects from A to Z by incorporating green, digital and social transformation, and entrepreneurial skills for successful training, instead of focusing only on one aspect of a programme. The training programmes should utilise available resources, skills, and knowledge to an optimum. It is crucial that the designed and developed programmes are mainstreamed and serve a broad group of trainees and companies. In addition to that, the contractor shall carry out a rapid skills gap analysis and set a baseline by identifying the capacity building needs at partner TVT institutions/colleges and companies" level to facilitate the delivery of CT programmes (considering the needs on gender sensitive and inclusive teaching practices). WP 3: Implementation of cooperative training measures in selected economic sectors The aim of this work package is for at least 300 trainees (of which 150 women and 20 Persons with Disabilities) to benefit and complete the developed programmes in the cooperative training modalities, where the learning takes place in TVET colleges and the partner companies. An allocation of the total target among the selected sectors will be discussed at the beginning of the consultancy. While all relevant stakeholders need to be engaged in the implementation, trainees" allotment depends on the selected training fields/sectors and will be agreed upon at a later stage. WP 4: (Re)-design and developing labour market oriented short-term trainings materials in selected economic sectors Work package 4 aims to design and develop training materials to provide a range of skills and knowledge gaps based short term training for job seekers and informally employed people, that improves employment prospects. The contractor is expected to focus on the design and development of compressive training packages employment-oriented qualification measures. At least one measure shall be developed for each one of the target groups, namely job seekers and informally self-employed workers, women and persons with disabilities. The focus of the thematic area remains on green, digital and social transformation, entrepreneurial skills including digital entrepreneurship. The number of each target group shall be identified at the beginning of the programme in collaboration with partners and stakeholders. WP 5: Implementation of labour market oriented short-term training measures in selected economic sectors Roll-out and implementation of at least four employment qualification measures (short-term training). As mentioned above, the four chosen measures must be implemented together with a partner institution and private sector to ensure sustainability. These partner institutions shall be able to take up the training at the end of the project. To this end, the contractor should not only consider governmental institutions but also private sectors, e.g. private training providers, companies and associations or chambers. Implementation partners: MoLS, Regional TVET Bureaus, private sector companies and associations, TVET colleges and any other relevant TVET stakeholders.
- Danmarks Tekniske Universitet - DTUKgs. Lyngby
Acquisition of a GC-QTOF-MS with PAL3
Our laboratory requires the capacity for gas chromatography coupled to high-resolution quadrupole time-of-flight mass spectrometry (GC-QTOF) to support advanced untargeted metabolomics of microbial systems, with a central objective of building a curated, high-confidence database of microbial strain-specific metabolic and volatile profiles that can be systematically mined as new biological questions arise. Achieving this goal requires an analytical platform capable of comprehensive, reproducible, and informationrich data acquisition that extends beyond the limitations of conventional GC-MS approaches. Microbial metabolomes are chemically diverse and highly strain dependent, encompassing volatile, semi-volatile, and derivatized metabolites produced across a wide dynamic range. Analyses of microbial extracts frequently yield complex chromatograms with extensive co-elution, while SPME headspace sampling of cultures captures transient and low-abundance microbial volatile organic compounds (mVOCs) that are central to microbial communication, competition, and environmental adaptation. High-resolution MS coupled to GC separation is uniquely suited to resolve this complexity. A GC-QTOF provides accurate-mass full-spectrum acquisition across the entire GC-elutable mass range, enabling elemental composition assignment and confident differentiation of isobaric compounds via fragmentation. This level of mass accuracy and resolving power is essential for untargeted metabolomics and is a prerequisite for generating strain profiles that remain interoperable over time, even as databases expand and analytical questions evolve. In order to combine our existing datasets of secondary metabolites and strain extracts, we require a system that can produce high abundances of molecular ions in the source. This will allow us to investigate the fragmentation of specific ions in very complex samples without the need for baseline separation. This is needed for higher throughput analysis of strains, and integrating our current fragmentation libraries into the new system. Unlike typical single-quadrupole GC-MS systems, which rely primarily on nominal-mass spectra, a QTOF enables precursor-specific, accurate-mass fragmentation experiments. Incorporating MS/MS information directly into strain profiles significantly increases their long-term value for downstream data mining, comparative analyses, and cross-study validation. The system’s ability to acquire complete, untargeted datasets with stable mass accuracy and wide dynamic range is critical for database-driven research. Full-spectrum acquisition ensures that all detectable metabolites are recorded in each analysis, allowing retrospective interrogation of historical data as new microbial metabolites are discovered or as additional strains are introduced into the database. This capability eliminates the need for re-analysis of archived samples and maximizes the scientific return from each experiment. Equally important is the platform’s compatibility with advanced spectral deconvolution, retention index alignment, and metabolomics software workflows, which enables consistent feature extraction and annotation across large sample sets. These capabilities are essential for constructing a robust, searchable strain metabolomics database that supports longitudinal studies, comparative strain analysis, and hypothesis-driven data mining. In summary, acquisition of a high-resolution GC-QTOF with accurate-mass MS/MS functionality is essential for establishing a scalable, reusable microbial metabolomics infrastructure. This instrument will enable our laboratory to gener-ate durable, high-confidence strain profiles that support discovery-driven research today while serving as a foundational resource for future data mining and systems-level microbial analysis. Capabilities Required for Building a Searchable Microbial Strain Database and incorporation of current data: • Accurate-mass, full-spectrum acquisition of GC-eluting metabolites, ensuring long-term interpretability of un-targeted datasets • High-resolution MS/MS fragmentation, enabling confident structural annotation and validation of strain-specific metabolites • Fast acquisition rates that are independent of resolution, compatible with SPME headspace and narrow GC peaks, preserving reproducibility across strains • Wide dynamic range and high sensitivity, capturing both dominant metabolic features and low-abundance strain markers • Retrospective data mining of archived datasets, allowing new metabolites or patterns to be identified without re-analysis • A robust data acquisition technique creating data the is interoperable with public and in-house datasets • High abundance molecular ion spectra from an EI source to allow CID fragmentation for in-house spectral library comparisons
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Danmarks Tekniske Universitet - DTU.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.