Frequency range extension modules for millimetre-wave network analysis (FHR-01) - PR926511-P
1 x frequency range extension module for millimetre-wave network analysis To expand a millimetre-wave measurement system, millimetre-wave frequency extension modules (so-called 'extenders’), 2-port waveguide calibration sets and reference horn antennas are to be procured. The frequency range extension modules will be u...
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
1 x frequency range extension module for millimetre-wave network analysis To expand a millimetre-wave measurement system, millimetre-wave frequency extension modules (so-called 'extenders’), 2-port waveguide calibration sets and reference horn antennas are to be procured. The frequency range extension modules will be used in conjunctio...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: Fraunhofer-Gesellschaft - Einkauf B12
- Veröffentlicht: 15. April 2026
- Frist: Nicht angegeben
Ausschreibungsbeschreibung
1 x frequency range extension module for millimetre-wave network analysis To expand a millimetre-wave measurement system, millimetre-wave frequency extension modules (so-called 'extenders’), 2-port waveguide calibration sets and reference horn antennas are to be procured. The frequency range extension modules will be used in conjunction with an existing Keysight PNA-X N5247B vector network analyser (not included in the scope of supply) to perform millimetre-wave network analysis. The extension modules must be compatible with a Keysight N5292A mm-wave test set controller (not included in the scope of supply); the relevant adapter cables are listed in LV Item 4.1.
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
1 Datei erfasst- Bekanntmachung
Ähnliche Bekanntmachungen
2- Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. - Einkauf B12 - Vergabestelle BauFrist: 18. Mai
Frequenzbereichserweiterungsmodule für Millimeterwellen-Netzwerkanalyse (FHR-01) - PR926511-P
Beschaffung von Frequenzbereichserweiterungsmodulen (Extender) für die Millimeterwellen-Netzwerkanalyse, inklusive 2-Tor Hohlleiter-Kalibrationssätzen und Referenz-Hornantennen. Die Module dienen der Erweiterung eines vorhandenen Keysight PNA-X N5247B Vektornetzwerkanalysators und müssen mit dem Keysight N5292A mm-Wave Test-Set Controller kompatibel sein. Inklusive benötigter Adapterkabel.
- Gas Networks IrelandCorkFrist: 09. Apr.
25/064 - Qualification System for for the provision of Polyethylene (PE) Pipe, Fittings and Valves
The objective of this QSQ is to qualify Applicants onto the Qualifications System for the manufacturing and supply of Polyethylene (PE) Pipe, Fittings and Valves for Gas Networks Ireland. The proposed supply requirements are to be divided into four (4) separate lots as detailed below: • Lot 1 (PE Pipe 90mm - 400mm) – Manufacture and supply of PE pipe for gas. • Lot 2 (PE Pipe 20mm - 63mm) – Manufacture and supply of PE pipe for gas. • Lot 3 (PE Fittings) Manufacture and/or supply of PE Fittings for gas. These include but are not limited to PE; caps, couplings, elbows, equal tees, flange adaptors, reducers, tee branch saddles, tees, tapping tees, G clamp adaptors, multi tap tees, branch saddles, bends, unequal tees and end caps. • Lot 4 (PE ball valves) – Manufacture and/or supply of PE Valves for gas. These include but not limited to valves ranging in size from small diameter 20mm to larger diameters up to 315 mm. Please note: Lots 1 and 2 relate to manufacture and supply requirements. Lots 3 and 4 relate to manufacture and/or supply requirements. The requirements for the manufacture and/or supply of pipes, fittings and valves under this Qualification System will include arrangements for delivery to various stipulated depot destinations on the island of Ireland and the ability to operate a national distribution network. Applicants should note that from time to time over the term of the Qualification System, the Contracting Entity, at its sole discretion but without altering the overall nature of the Qualification System, may modify the Qualification System to reflect changes in its requirements. Such modifications may include changes to the pipe diameter and pressure rating which may result in an increase to the pipe size, wall thickness and pipe properties or specification and the provision of services or additional supplies associated with such changes. The Contracting Entity will also seek similar changes to pipe fittings and valves. The conditions under which such an option may be exercised by the Contracting Entity will be outlined in the relevant call off competition document. The Contracting Entity also reserves the right to add additional lots to the Qualification System. Applicants may apply for qualification in one or more lots. At the discretion of the Contracting Entity a full site visit and audit of the prospective Qualified applicants supply chain manufacturing facility(s) will be carried out to validate and support their pre-qualification submission. In the event of a site visit and audit being carried out to pre-qualify the Supplier must successfully pass this site inspection audit. It is envisaged that the scope of products and services of the initial Call for Competition to be drawn-down under the Qualification System will be, but not limited to; PE pipes, fittings and valves and will cover the following: 1. Standards: • Gas - as per I.S. EN 1555 or equivalent. 2. Indicative Diameter Range: • PE pipe, fittings and valves ranging in size from small diameter 20mm to large diameter 400 mm pipe and fittings. 3. Indicative Pipe Specification/Types: • Solid wall pipe; • Coextruded pipe; • Peelable pipe; and 4. Indicative Pressure Range and Pipe Materials : Pipe Material/Description Pressure Range (Barg) PE 100 (SDR 11) 7 PE 80 (SDR 11) 4 PE 100 (SDR 17) 4 PE 80 (SDR 17) 2 5. Colour • PE80: solid wall PE pipe in yellow colour • PE80: c-extruded wall PE pipe with outer layer in yellow colour • PE100: solid wall PE pipe in orange colour (sizes 180mm and above) • PE100: PE 100 PE pipe with peelable outer layer in yellow colour (with stripes) • Pipes for proof-of-concept hydrogen projects shall be yellow with blue axial stripes.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Fraunhofer-Gesellschaft - Einkauf B12.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.