UCC-2025-35 - RFT for the Supply, Delivery, Installation, Commissioning, Calibration, Validation of a Total Reflection X-ray Fluorescence (TXRF) Analysis Spectrometer, for Tyndall National Institute.
University College Cork request the supply of a Total Reflection X-ray Fluorescence (TXRF) Analysis Spectrometer for non-destructive, trace-level wafer surface contamination analysis, with automated handling and rapid full-wafer mapping. The system must support routine monitoring on 100 mm and up to 200 mm wafers and b...
Angebotsfrist:18. Mai 2026
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
University College Cork request the supply of a Total Reflection X-ray Fluorescence (TXRF) Analysis Spectrometer for non-destructive, trace-level wafer surface contamination analysis, with automated handling and rapid full-wafer mapping. The system must support routine monitoring on 100 mm and up to 200 mm wafers and be compatible with...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: University College Cork
- Veröffentlicht: 20. April 2026
- Frist: 18. Mai 2026
Ausschreibungsbeschreibung
University College Cork request the supply of a Total Reflection X-ray Fluorescence (TXRF) Analysis Spectrometer for non-destructive, trace-level wafer surface contamination analysis, with automated handling and rapid full-wafer mapping. The system must support routine monitoring on 100 mm and up to 200 mm wafers and be compatible with bare and processed wafers including thin films, epitaxial layers, and compound semiconductor substrates. The Spectrometer must be suitable for in a research cleanroom environment, with robust software control, recipe management, and data export.
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
6- Education Procurement Service (EPS)Limerick
LA3183C - UCC - CFT for the Supply, Delivery, Installation, Commissioning and Calibration of a Non-contact Wafer Sheet Resistance Mapper for Tyndall National Institute, University College Cork (UCC)
Das University College Cork beschafft ein berührungsloses Wafer-Schichtwiderstandsmessgerät für Halbleitermaterialien (Wafer und Coupons). Das System dient der hochpräzisen, quantitativen Widerstandsmessung nach der Halbleiterprozessierung. Erforderlich sind Wafer-Mapping, automatisierte Messungen sowie die Kompatibilität mit Wafergrößen bis 200 mm (8 Zoll) Durchmesser und kleinen Proben ab 10 mm Kantenlänge.
- Education Procurement Service (EPS)Limerick
LA3363C-Request-for-Tenders under Open (National) Procedure for the Supply, Delivery, Installation and Commissioning of a Maskless Photolithography System for Dublin City University (DCU)
Tenders are sought for the Supply, Delivery, Installation and Commissioning of a maskless photolithography system to Dublin City University (DCU) which can create micron-scale (i.e. 1um or less) structures on SU8 coated silicon wafers by directly writing a design onto the wafer. The wafer size should be minimum standard 4" dimensions. Ideally, the instrument will be designed to operate outside a clean-room environment.
- Education Procurement Service (EPS)LimerickFrist: 12. Mai
RFT for the Supply, Delivery, Installation, Commissioning and Calibration of Isothermal Titration Calorimeter (ITC) for Protein Complexes for Trinity College Dublin
Trinity College Dublin require the supply of Isothermal Titration Calorimeter (ITC) for protein complexes for the deliverables of a Research Ireland grant. The calorimeter is required for measuring micro-calories of heat evolved or absorbed from protein-protein and protein-small molecule interactions in aqueous solution. The measurement involves multiple injections of ligand (protein, other macromolecules, small molecules) into a cell containing another protein, small molecule, or other macromolecules. The titration is performed under isothermal conditions using a reference cell containing water or related aqueous solution that is similar to the experimental cell. Changes in temperature between the two cells during injections are rapidly equilibrated using active power compensation that is calibrated for calories of heat. The properties of the isothermal titration calorimeter should include the following: (1) The tenderer SHOULD provide a new or recent state-of the-art (ex-demo) model ITC calorimeter, and if ex-demo, it should be minimally used. Volume of experimental and reference cells should be approximately 200 mico-Liters. (2) Typical concentration ranges for analyses should ideally be in the range from 1 micro-Molar to 100 micro-Molar for macromolecules (typically proteins) in the cell, and 10 micro-Molar to 1M concentrations in the injections syringe for the ligand. (3) Preferred temperature range for isothermal titrations from 4 deg Celsius to 60 deg Celsius. (4) software that can analyse data and determine the Kd (dissociation constant), enthalpy, and entropy from analyses of the titrations. (5) Software should handle simple 1:1 binding models, with the possibility to analyse more complex interactions, such as multiple binding sites, sequential interactions. The capability to analyse complex binding with rigor would be a major advantage, as many interactions are not simple 1:1. (6) minimal generation of bubbles or artefactual heat, which may arise from high concentrations of viscous protein in cell (7) Ideally - prefer system/software compatibility with .opj files generated by Origin 7 (or later) software, since we have nearly 20 years of previous data collections. This could be transferred to new control computer for continuity. (8) New computer, drivers, and accessories required to run the calorimeter software.
- Education Procurement Service (EPS)Limerick
LA3541C - RFT for the Supply, Delivery, Installation, Commissioning and Calibration of a Bioreactor Suite for Bioprocess Optimisation and Digestion Fermentation Modelling for University College Dublin
University College Dublin request Tenders for the supply, delivery and installation of a bioreactor platform for small-scale fermentation. The bioreactor platform must be capable of running parallel experiments in all the benchtop bioreactors with independent process control. The platform should consist of 3 x 3000 ml and 7 x 500 ml vessels. Each vessel should have the following accessories/measurements: ● Rushton impeller ● pH ● Dissolved Oxygen ● Heating - Heating Jacket ● Porous sparger ● Coo
- Education Procurement Service (EPS)Limerick
LA3455F DAFM – RFT to Establish a Single Supplier Framework Agreement for the Supply, Delivery, Installation, Commissioning and Calibration of a Temperature Monitoring System
Supply, Delivery, Installation, Commissioning, Calibration, staff training and maintenance of a temperature monitoring system for laboratory equipment. The 2 locations required are, 1. DAFM Laboratories Backweston, Celbridge, Co. Kildare. 2. DAFM Cork Laboratory, BTL, Model Farm Road, Cork, Co. Cork. The proposed Temperature Monitoring System is intended to be used for the temperature monitoring of laboratory equipment for: Incubators, Chill Cabinets, Freezers and Ovens. The Temperature Monitoring system will ideally have the capability to monitor equipment temperatures from -80C to 150C, the laboratory may also require liquid nitrogen monitoring. The temperature monitoring system must be easily accessed on multiple Desktops/Laptops. All of the temperature monitoring probes require calibration; the supplier must be ISO 17025 accredited for specified temperature range. In addition to the initial purchase by DAFM, The State Laboratory reserves the right to purchase one (1) additional Temperature Monitoring System, if required, during the term of the framework, up to the value of the published framework agreement.
- Education Procurement Service (EPS)LimerickFrist: 11. Mai
LA3634C-DCC-CFT for the Supply of a Gas Chromatography system with a Triple Quadrupole Mass Spectrometer (GC-QQQ), Helium Saver Autosamplers for Purge and Trap and Solid Phase Micro Extraction
Dublin City Council (DCC) Central Laboratory wishes to procure a new gas chromatography mass spectrometry system for water quality analysis based on SI99 of 2023. Dublin City Council’s Central Laboratory conducts and provides INAB accredited testing of public and private drinking water supplies, as well as testing Uisce Eireann water samples from processing and the supply network as required. In future, DCC expects to focus increasingly on private supplies, and the applicable legislation requires the same range of tests as at present. Many of these tests are currently outsourced by DCC, meanwhile limits and enforcement are expected to tighten over time. The main focus of the current procurement specification is to bring analyses back in-house and onto DCC’s INAB ISO17025 scope, to maximise 1. Practicable reduction in the costs of outsourced analyses by the Central Laboratory 2. DCC’s ability to implement its current and future statutory testing 3. DCC testing capability to serve Local Authorities around Ireland 4. Provision of impartial means for DCC to verify the effectiveness of water management initiatives for Climate and Urban Resilience. Analytical parameters of interest are based on Statutory Instrument 99-2023 and include core suites of Volatile Organic Compounds (VOCs including THMs), Pesticides, and Per- and polyfluoroalkyl substances (PFAS). Potential future additions to the scope include the endocrine disruptors and (micro)plastic residues. To address this Dublin City Council request tender’s equipment supply, delivery, installation, setup, service and maintenance, warranty, software licences and upgrades, and a stock of consumable equipment parts, and training: for a Gas Chromatography system with a Triple Quadrupole Mass Spectrometer (GC-QQQ), Helium saver, and autosamplers for Purge and Trap and Solid Phase Micro Extraction.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 18. Mai 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist University College Cork.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.