Supply of Small Arms Ammunition and Auto Canon Ammunition Internal identifier: CPoA B PRJ.CAP.1269 2026
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in eith...
Angebotsfrist:10. Juni 2026
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unli...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: European Defence Agency
- Veröffentlicht: 06. Mai 2026
- Frist: 10. Juni 2026
- Thema: Chemikalien
Ausschreibungsbeschreibung
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 01 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
10- European Defence AgencyRue des Drapiers, 17-23Frist: 01. Juni
Supply of Small Arms Ammunition and Auto Canon Ammunition Internal identifier: CPoA B PRJ.CAP.1269 2026
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 01 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
- European Defence AgencyBruxellesFrist: 01. Juni
Supply of 155mm artillery ammunition (All Up Rounds (AUR), and individual components of AUR) Internal identifier: CPoA B PRJ.CAP.1269 2026
Supply of 155 mm artillery ammunition in the configuration of All Up Rounds (AUR), and also individual components thereof. The scope is divided into 24 Lots for two weapon platforms—CAESAR (12 Lots) and PzH2000 (12 Lots). Each lot covers a specific AUR configuration, or Fuze type, or Projectile type, or Modular Charge System type, or Primer for the CAESAR and PzH2000 platforms. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 01 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/businesspartnerslegalentitiesandbankaccounts_ en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
- European Defence AgencyBruxellesFrist: 10. Juni
Supply of 155mm artillery ammunition (All Up Rounds (AUR), and individual components of AUR) Internal identifier: CPoA B PRJ.CAP.1269 2026
Supply of 155 mm artillery ammunition in the configuration of All Up Rounds (AUR), and also individual components thereof. The scope is divided into 24 Lots for two weapon platforms—CAESAR (12 Lots) and PzH2000 (12 Lots). Each lot covers a specific AUR configuration, or Fuze type, or Projectile type, or Modular Charge System type, or Primer for the CAESAR and PzH2000 platforms. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 10 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/businesspartnerslegalentitiesandbankaccounts_ en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
- Ministerie van Infrastructuur en WaterstaatDen HaagFrist: 15. Apr.
Innovation partnership for pre-deployment of autonomous road transport
Call for a request to participate in a European tender for an innovation partnership issued by the Ministry of Infrastructure and Watermanagement for pre-deployment of autonomous road transport To be determined during the tender procedure.
- European Court of AuditorsLuxembourgFrist: 23. Juni
Procurement of dictionaries, specialised databases on linguistic and terminological issues and encyclopaedias in electronic format
The objective of this call for expressions of interest is to set up a list of pre-selected candidates capable to provide to the European Court of Auditors subscriptions to dictionaries, specialised databases on linguistic and terminological issues and encyclopaedias in electronic format published in any of the EU Member States and outside the EU. Candidates may submit an expression of interest at any time within four years of the publication of this notice, except during the final three months. However, following the publication of this CEI, the ECA plans to issue its first request for price offers (invitation to tender) in October 2026. Preselected candidates included on the CEI list will be invited to submit price offers accordingly. Therefore, to be considered for the October tender, candidates must submit their application no later than June 23, 2026. Expressions of interest are to be submitted in one of the official languages of the European Union by electronic mail to the functional mailbox: eca-procurement.service@eca.europa.eu
- LuftfartsverketNORRKÖPINGFrist: 05. Mai
Public procurement - VOR systems
LFV, The Swedish State Air Navigations Services provider invites suppliers (hereinafter referred to as "Candidates") with this call for competition to submit a request to participate in this pre qualification. The purpose of this "call for competition" is for LFV to pre qualify suitable potential tenderers that in the next stage of this procurement procedure be invited to submit a tender for a contract to supply LFV with operational VOR stations including service, support and optionally installation.
- Waterford and Wexford Education and Training Board_110494WexfordFrist: 27. Mai
Single Supplier Framework Agreement for the Supply of Automotive Technician Apprenticeship Equipment and Associated Services for Waterford and Wexford Education and Training Board
This public procurement competition relates to the establishment of a Single Supplier Party Framework ("Framework") for the Supply of Automotive Technican Apprenticeship Equipment and Associated Services to Waterford and Wexford Education and Training Board The tender is divided into 12 Lots. Tenderers may submit proposals for one or more lots and must be clear on which lots they are tendering for in their response. The minimum contract awarded will be one Lot. The quantities may also be varied depending on the funding available. Tenderers may tender for one or several lots.
- Bank of FinlandHelsinkiFrist: 25. Mai
INVITATION TO PARTICIPATE - Time series data analytics service
Bank of Finland (also ”Contracting Entity”, “BoF” or ”Customer”) is inviting candidates to leave a request to participate for a procurement of Time series data analytics service. The object of the procurement is the renewal or partial replacement of the Bank of Finland's internally developed data and analytics service, the time series system. Please see in more detail in the Preliminary Call for Tenders and its appendices. AT THE MOMENT No tender nor preliminary tender is expected from the candidates. The purpose of the procurement is to select one (1) supplier with an overall responsibility, with whom the Contracting Entity will enter into an agreement valid until further notice. The selected supplier may also be a consortium formed by the candidates. Please note! The mandatory requirements for the object of the procurement described in the documents or the criteria set out for most economically advantageous tender are NOT negotiated during the procurement process and their content is not subject to change, but their specification is possible. In other respects, the Preliminary Call for Tenders and its appendices are preliminary views of the Contracting Entity and the documents will be amended and specified in the course of the procurement and negotiation process. The preliminary timetable for the procurement is presented in the Preliminary Invitation to Negotiate. The schedule may be subject to change during the procedure.
- ESBDublin 2Frist: 04. Juni
Provision of Service and Availability Agreement(s) (SAA) for Individual and/or Multiple Wind Farm Sites and/or the Provision of Major Component Replacement Services for specified Wind Farms only
ESB proposes to establish a Qualification System under a negotiated procedure for Service and Availability Agreement(s) (SAA) for Individual and/or Multiple Wind Farm Sites and/or the Provision of Major Component Replacement Services for specified Wind Farms only. A high level scope of works to be procured under this Qualification System is outlined in Section A of the attached Qualification System Questionnaire. ESB is seeking to qualify a number of contractors to the Qualification System for but not be limited to, the Wind Farms, broken down by Technology Type per Lot detailed further in the attached Qualification System Questionnaire. Economic Operators who wish to participate in the Qualification System process should submit a response as set out in the attached Qualification System Questionnaire. Applications may be made to join The Qualification System at any time.
- Stadt PulheimFrist: 05. Juni
Upgrade of Ablutions to Accommodation Blocks 12 and 13, Collins Barracks, Co Cork
Refer to Briefing Document. This is a Call for Tender in respect of Construction Works/Services. Tenderers must associate themselves with this Competition in order to access the tender documents, ask and receive clarifications and submit a tender response. To do so you must ensure you click “Proceed with Association”. This can only be done via login. All responses must be submitted in a zipped file format and must be accurately named. The Contracting Authority are not in a position to answer queries marked “confidential “ Late tenders will not be accepted. Tenderers experiencing any difficulties should contact the e-tenders helpdesk at irish-eproc-helpdesk@eurodyn.com or by phone on +353 818001459.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 10. Juni 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist European Defence Agency.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.