Twin-screw extruder
The project focuses on the development of biodegradable long-acting drug delivery systems using hot-melt extrusion as a solvent-free and scalable manufacturing method. The planned research will investigate the processing of pharmaceutical grades polymers and lipids and excipient-based matrices into solid dosage forms s...
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
The project focuses on the development of biodegradable long-acting drug delivery systems using hot-melt extrusion as a solvent-free and scalable manufacturing method. The planned research will investigate the processing of pharmaceutical grades polymers and lipids and excipient-based matrices into solid dosage forms such as implants, ...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: Syddansk Universitet
- Veröffentlicht: 06. Mai 2026
- Frist: Nicht angegeben
Ausschreibungsbeschreibung
The project focuses on the development of biodegradable long-acting drug delivery systems using hot-melt extrusion as a solvent-free and scalable manufacturing method. The planned research will investigate the processing of pharmaceutical grades polymers and lipids and excipient-based matrices into solid dosage forms such as implants, films, and other extruded formats for long-acting drug delivery. The requested twin-screw extruder is essential for this project because it enables small-scale pharmaceutical formulation development under well-controlled processing conditions. The system must be suitable for working with limited amounts of active pharmaceutical ingredients and excipients, while allowing precise control of temperature, screw configuration, residence time, and die geometry. The uniqueness of the requested equipment lies in its combination of small-scale material use, modular screw design, pharmaceutical applicability, and compatibility with the specific extrusion formats required for the project. These features are necessary for the planned formulation development and cannot be fully replaced by standard large-scale or non-pharmaceutical extrusion equipment.
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
10- Danmarks Tekniske Universitet - DTUKgs. Lyngby
Purchase of Formulation development and GMP manufacture of tablets for early clinical development
DTU intends to purchase Formulation development and GMP manufacture of tablets for early clinical development from Porton Pharmaceutical Chemicals GmbH. The acquisition concerns specialized pharmaceutical development and manufacturing services required to enable a first-in-human clinical study within the Microbiome Health Initiative (MHI). The services include formulation development, analytical method development and validation, non-GMP and GMP manufacture of an oral solid dosage form (tablets), stability studies, and preparation of documentation to support regulatory submissions (IND/IMPD). The work covers the full IND-enabling drug product package for a novel small-molecule compound within the bile acid class, intended for use in a Phase I human intervention study. The services are highly specialized, research- and development-driven, and closely linked to the specific and regulatory requirements of the project.
- UNIVERSITETET I BERGENBERGENFrist: 04. Juni
ANSK-25-0644 Framework agreement Laboratory consumables and small equipment for labs
The University of Bergen (UiB) needs a new framework agreement for the delivery of laboratory consumables and small equipment for research and education at the university. The procurement will also be made on behalf of The Norwegian University of Science and Technology (NTNU) and Nord University.
- European Border and Coast Guard Agency (FRONTEX)WarsawFrist: 13. Mai
Stationary document readers with warranty, training, and maintenance support
The purpose of this Framework Contract is to enhance border checks capabilities through the provision of stationary document readers, accompanied by comprehensive warranty, training, and maintenance support. This acquisition aims to support Frontex's efforts to strengthen border checks and law enforcement cooperation in targeted regions, providing the necessary tools and expertise for effective and efficient operation of document reading systems. All details are specified in the Technical Specifications chapter and Tender Specification document. Technical capacities of Western Balkan partners to conduct border checks and border surveillance are increased The following activities will be implemented under output 2.2: 2.2.1 Coordination of equipment donation among EU actors and Member States To avoid overlaps with deliveries of other border management equipment funded by the EU, Frontex will organise regular exchanges at working-level with the Commission, Member States and the EU Delegations on equipment needs, as well as to ensure close coordination of planned supplies. This will be done via regular exchanges, in particular with relevant beneficiaries prior to any equipment being purchased and supplied. 2.2.2 Procurement of technical equipment for border checks In parallel to the rollout of training, Frontex will, in consultation with its Wester Balkan partners and based on its expertise on state-of-the-art technology, procure technical equipment to improve the border checks’ performance. These might include videoscopes, detectors, portable ID readers and other devices allowing for more efficient check-ups of vehicles, goods and people. The procurement of the equipment will take place at a later stage of the project, after thorough, evidence-based assessment. Supply of equipment will be closely coordinated with necessary trainings to ensure its proper use, as well as sustainability of the equipment beyond project implementation. 2.2.3 Procurement of technical equipment for border surveillance By the same token as for border checks, Frontex will procure equipment for border surveillance. This might include googles, binoculars, infrared cameras, etc. The procurement of the equipment will take place at a later stage of the project, after thorough, evidence-based assessment. Supply of equipment will be closely coordinated with necessary trainings to ensure its proper use, as well as sustainability of the equipment beyond project implementation.
- European Border and Coast Guard Agency (FRONTEX)WarsawFrist: 25. Mai
Stationary document readers with warranty, training, and maintenance support
The purpose of this Framework Contract is to enhance border checks capabilities through the provision of stationary document readers, accompanied by comprehensive warranty, training, and maintenance support. This acquisition aims to support Frontex's efforts to strengthen border checks and law enforcement cooperation in targeted regions, providing the necessary tools and expertise for effective and efficient operation of document reading systems. All details are specified in the Technical Specifications chapter and Tender Specification document. Technical capacities of Western Balkan partners to conduct border checks and border surveillance are increased The following activities will be implemented under output 2.2: 2.2.1 Coordination of equipment donation among EU actors and Member States To avoid overlaps with deliveries of other border management equipment funded by the EU, Frontex will organise regular exchanges at working-level with the Commission, Member States and the EU Delegations on equipment needs, as well as to ensure close coordination of planned supplies. This will be done via regular exchanges, in particular with relevant beneficiaries prior to any equipment being purchased and supplied. 2.2.2 Procurement of technical equipment for border checks In parallel to the rollout of training, Frontex will, in consultation with its Wester Balkan partners and based on its expertise on state-of-the-art technology, procure technical equipment to improve the border checks’ performance. These might include videoscopes, detectors, portable ID readers and other devices allowing for more efficient check-ups of vehicles, goods and people. The procurement of the equipment will take place at a later stage of the project, after thorough, evidence-based assessment. Supply of equipment will be closely coordinated with necessary trainings to ensure its proper use, as well as sustainability of the equipment beyond project implementation. 2.2.3 Procurement of technical equipment for border surveillance By the same token as for border checks, Frontex will procure equipment for border surveillance. This might include googles, binoculars, infrared cameras, etc. The procurement of the equipment will take place at a later stage of the project, after thorough, evidence-based assessment. Supply of equipment will be closely coordinated with necessary trainings to ensure its proper use, as well as sustainability of the equipment beyond project implementation.
- Helsingin Kaupunginteatteri / Helsingin teatterisäätiöHelsinkiFrist: 04. Mai
Helsinki City Theatre´s Performer Flying System
Helsinki City Theatre will be renovating the big stage’s engineering equipment and mechanical systems (referred also as “Installation”). The scope of the contract is the provision of performer flying equipment and support services (hereinafter referred to “Delivery”). Following supplies and services are included to the Delivery: -Provision of a movable performer flying system with horizontal and vertical travel -Integration of performer flying equipment with a third-party control system -Provision of performer flying harnesses -Provision of training and flight director services More detailed description of the Delivery can be found in the Annexes of the Invitation to Tender.
- Helsingin Kaupunginteatteri / Helsingin teatterisäätiöHelsinkiFrist: 18. Mai
Helsinki City Theatre´s Performer Flying System
Helsinki City Theatre will be renovating the big stage’s engineering equipment and mechanical systems (referred also as “Installation”). The scope of the contract is the provision of performer flying equipment and support services (hereinafter referred to “Delivery”). Following supplies and services are included to the Delivery: -Provision of a movable performer flying system with horizontal and vertical travel -Integration of performer flying equipment with a third-party control system -Provision of performer flying harnesses -Provision of training and flight director services More detailed description of the Delivery can be found in the Annexes of the Invitation to Tender.
- Ministry for Gozo and PlanningVictoria,
MGP eQ 09/2026 - Quotation is for the supply and delivery of promotional items in connection with the ReMED project under the Interreg Euro MED Programme.
Quotation for the supply and delivery of promotional items in connection with the ReMED Project under the Interreg Euro‑MED Programme. The procurement covers the supply, branding, and delivery of promotional materials to the Ministry for Gozo and Planning in accordance with the technical specifications and conditions of contract. Award will be made on the basis of the lowest priced compliant offer.
- DRAMMEN KOMMUNEDRAMMEN
Framework agreement for checking playground equipment
The agreement includes inspections of playground equipment in schools, nurseries, community facilities, playgrounds and ball places. The inspections shall be carried out through annual main inspections and periodic inspections, as well as the delivery of reports. A framework agreement will be signed with one tenderer. The contract period is 2 years. The contract can be extended for 1+1 year.
- Federal Department of Foreign Affairs - FDFAZollikofenFrist: 14. Juni
Municipality-led development for the period 01.01.2027 to 31.12.2030 in northern Mozambique
The project seeks to establish a results-oriented governance model in selected municipalities in northern Mozambique by strengthening coordination and joint action between local and national actors, with the aim of improving municipal service delivery and fostering a more enabling environment for local economic development. To this end, the project will allocate resources to selected municipalities to pilot a governance approach focused on long-term municipal economic development objectives. This approach will promote local economic development based on municipalities’ strategic plans, as well as on needs and priorities identified in collaboration with local stakeholders, including the private sector and civil society.
- The Land Development AgencyDublinFrist: 11. Mai
Design and Construction of the Anglesea Terrace Project, Cork (Pro342)
The Land Development Agency (LDA), established in September 2018, is a Government land management initiative, with a key focus on State-owned land. The LDA opens up State-owned land to improve housing options for individuals and families. The LDA also drives the medium to long term compact development of our cities by providing a vision and delivery strategy for larger scale strategic land areas. The Anglesea Terrace project is a new, large, residential development with a total application site area of approx. 0.25 ha (net area), on brownfield lands in Cork City Centre, located at the South Link Road (N27) and Old Station Road junction. The Anglesea Terrace development forms part of current and future programmes of work to be undertaken by the LDA to develop affordable sale, cost rental and social housing / apartments. The overall development will comprise of 147 no. apartments and all associated development. Refer to the Pre-Qualification Questionnaire (PQQ) for further information.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Syddansk Universitet.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.