LA3692C - DCU - CFT Supply, Delivery, Installation, Commissioning and Calibration of a RF, THz and Optical Test and Measurement Equipment [8 Lots]
Dublin City University (DCU) request the supply, delivery, installation, commissioning and calibration of a RF, THz and Optical Test and Measurement Equipment. There are eight (8) lots in this requirement that can be used for testing RF, sub-THz, and optical communications systems. The equipment comprises relevant tran...
Angebotsfrist:12. Juni 2026
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
Dublin City University (DCU) request the supply, delivery, installation, commissioning and calibration of a RF, THz and Optical Test and Measurement Equipment. There are eight (8) lots in this requirement that can be used for testing RF, sub-THz, and optical communications systems. The equipment comprises relevant transmitters, receive...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: Education Procurement Service (EPS)
- Veröffentlicht: 12. Mai 2026
- Frist: 12. Juni 2026
Ausschreibungsbeschreibung
Dublin City University (DCU) request the supply, delivery, installation, commissioning and calibration of a RF, THz and Optical Test and Measurement Equipment. There are eight (8) lots in this requirement that can be used for testing RF, sub-THz, and optical communications systems. The equipment comprises relevant transmitters, receivers and sources in the RF, sub-THz, and optical domains, in addition to signal characterisation facilities. 1 Distributed Software-Defined Radio Nodes and Wideband Software-Defined Radio Platform 2 Optical IM/DD Reference Transceiver 3 Optical Multi-Format Coherent Transmitter 4 Optical Coherent Receiver 5 Electrical Pattern Generator and Bit Error Rate Test Set 6 Ultra-stable Optical Frequency Comb 7 RF Phase Noise and Signal Analyser 8 THz Transceiver (Up/Down Conversion)
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
5- Education Procurement Service (EPS)LimerickFrist: 12. Juni
LA3692C - DCU - CFT Supply, Delivery, Installation, Commissioning and Calibration of a RF, THz and Optical Test and Measurement Equipment [8 Lots]
Dublin City University (DCU) beschafft die Lieferung, Installation, Inbetriebnahme und Kalibrierung von RF-, THz- und optischer Test- und Messausrüstung in 8 Losen: 1) Verteilte Software-definierte Funkknoten und Breitband-SDR-Plattform, 2) Optischer IM/DD-Sendeempfänger, 3) Optischer Multi-Format-kohärenter Sender, 4) Optischer kohärenter Empfänger, 5) Elektrischer Pattern-Generator und Bitfehlerraten-Testset, 6) Ultra-stabiler optischer Frequenzkamm, 7) RF-Phasenrausch- und Signalanalysator, 8) THz-Sendeempfänger (Auf/Ab-Konvertierung).
- Education Procurement Service (EPS)Limerick
LA3455F DAFM – RFT to Establish a Single Supplier Framework Agreement for the Supply, Delivery, Installation, Commissioning and Calibration of a Temperature Monitoring System
Supply, Delivery, Installation, Commissioning, Calibration, staff training and maintenance of a temperature monitoring system for laboratory equipment. The 2 locations required are, 1. DAFM Laboratories Backweston, Celbridge, Co. Kildare. 2. DAFM Cork Laboratory, BTL, Model Farm Road, Cork, Co. Cork. The proposed Temperature Monitoring System is intended to be used for the temperature monitoring of laboratory equipment for: Incubators, Chill Cabinets, Freezers and Ovens. The Temperature Monitoring system will ideally have the capability to monitor equipment temperatures from -80C to 150C, the laboratory may also require liquid nitrogen monitoring. The temperature monitoring system must be easily accessed on multiple Desktops/Laptops. All of the temperature monitoring probes require calibration; the supplier must be ISO 17025 accredited for specified temperature range. In addition to the initial purchase by DAFM, The State Laboratory reserves the right to purchase one (1) additional Temperature Monitoring System, if required, during the term of the framework, up to the value of the published framework agreement.
- Education Procurement Service (EPS)Limerick
LA3645C - TCD - CFT for the Supply, Delivery, Installation and Calibration of an Integrated Controller and Software for a Real Time Hybrid Structural Test System for Trinity College Dublin (TCD)
Trinity College Dublin request the supply of an Integrated Controller and Software for a Real Time Hybrid Structural Test System for testing of structures subjected to dynamic loading. The new controller and software package will be direct replacements for antiquated components in an existing real-time hybrid testing system. This system uses a 150kN actuator to apply force and/or displacement to test specimens. Hydraulic power supplied by an air-cooled HPU with a capacity of 100lpm. Hybrid testing is an advanced form of structural testing that integrates laboratory experiments with computational modelling. The structure to be investigated is partitioned into two substructures, one of which is physically tested in the laboratory while the response of the other is modelled using computational methods. The test controller and associated software will enable real-time hybrid testing of structures subjected to dynamic loading. The new controller and software package will be direct replacements for antiquated components in an existing real-time hybrid testing system in the TCD structural engineering laboratory. This system uses an MTS 244.23 150kN actuator to apply force and/or displacement to test samples, with hydraulic power supplied by an MTS SilentFlo 515.3 HPU. Hybrid testing integrates laboratory experiments with computational modelling. The structure to be investigated is partitioned into two substructures, one of which is physically tested in the laboratory while the response of the other is modelled using computational methods.
- Education Procurement Service (EPS)Limerick
LA3540C-UL-CFT-Supply, Delivery, Installation and Commissioning of a Mobile Transient Mass Spectrometer and a FTIR+ATR Spectrometer for the University of Limerick (UL) [2 Lots]
Tenderers are invited to tender for: Lot 1- A mobile (cart-driven) mass spectrometer capable of ultra-fast response times for capturing short-lived gas phase concentration dynamics. A mass spectrometer is an analytical instrument used to identify and quantify molecules based on their mass-to-charge ratio. It works by ionising a sample, accelerating the ions through an electric or magnetic field, and measuring how they separate based on their mass and charge. The resulting spectrum provides information about the composition and structure of the sample. Lot 2- An FTIR spectrometer with potential ATR capabilities capable of ultra-fast response times for capturing short-lived surface species dynamics. An FTIR (Fourier Transform Infrared) spectrometer is an analytical instrument that measures how a sample absorbs infrared light across a wide spectral range. By applying a Fourier transform to the recorded interferogram, an infrared spectrum is produced that reveals the sample’s molecular vibrations, enabling identification and characterisation of chemical bonds, functional groups, and material composition.
- University College CorkCork
Supply, Delivery and Installation of a Transmission Electron Microscopy (TEM) Suite consisting of 2 TEM tools and 1 Focused Ion Beam–Scanning Electron Microscope (FIB.SEM) for Tyndall Instit, UCC,
Tenders are sought for the Supply, Delivery and Installation of a Transmission Electron Microscopy (TEM) Suite, to Tyndall National Institute, University College Cork (UCC) comprising three complementary instruments: 1. One (1) Aberration-corrected and monochromated TEM 2. One (1) 200 kV high-throughput TEM 3. One (1) Focused Ion Beam–Scanning Electron Microscope (FIB-SEM) This procurement will establish a nationally significant microscopy capability for Ireland, strengthening Tyndall’s leadership in semiconductor, photonic, and quantum materials research and supporting long-term collaboration with academic and industrial stakeholders. The TEM Suite will deliver sustained scientific, technological, and economic impact through enhanced analytical capability, research excellence, and innovation at the nanoscale. This investment will expand and modernise Tyndall’s capability in advanced materials and device characterisation to meet the requirements of its national and international research programmes, including activities under the EU Chips Act and strategic collaborations with academic and industrial partners. The TEM Suite will form a key component of the new Tyndall laboratory facilities currently under development and will support Tyndall’s mission to provide world-leading infrastructure for semiconductor, photonic, and quantum technologies. The Aberration-corrected and monochromated TEM will represent the highest-performance instrument within the suite. It must deliver sub-ångström imaging resolution and high-energy-resolution spectroscopy, providing the capability to study interfaces, defects, and nanostructures at the atomic scale. The system must support advanced analytical and imaging modes, including low-dose operation for beam-sensitive materials, Lorentz and 4D-STEM imaging, and in-situ experimentation (electrical, thermal, and environmental). Automated alignment, optical stability, and full integration with advanced camera, detector, and control software are essential to ensure repeatable and high-quality data generation across multiple users. The 200 kV high-throughput TEM capable of atomic resolution imaging will provide a complementary, multi-user analytical capability to support daily research operations and routine analysis. It must combine high brightness and excellent spatial resolution with rapid operational stability, user-friendly alignment, and automated workflow functionality. This instrument will be optimised for versatility and efficiency, ensuring broad accessibility for internal and collaborative research, training, and industry engagement activities. The FIB-SEM will enable site-specific sample preparation, 3D structural analysis, and nanoscale milling to support both TEM systems. It must achieve high-resolution imaging and precision ion-beam milling for lamella production and cross-sectional analysis. Integration with the TEM workflows is required to ensure seamless specimen transfer and preparation from wafer-scale structures to atomic-scale analysis. This tender is being issued as a single integrated suite rather than as separate tools to ensure technical, operational, and economic coherence across all instruments. Procuring the TEMs and FIB-SEM from a single manufacturer will enable a shared control software platform, providing a consistent user interface and operational framework across the suite. This is important in Tyndall’s multi-user research and training environment, for staff, postgraduate students, and industry partners, as it simplifies training, improves safety, and promotes efficient use of laboratory time. A unified suite will also allow for the interchange of sample holders and accessories, enabling seamless workflow integration from sample preparation to atomic-scale imaging. A single-supplier arrangement provides additional benefits including simplified warranty and maintenance agreements, harmonised service schedules, and a single point of technical contact.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 12. Juni 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Education Procurement Service (EPS).
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.