Herstellerserviceverlängerung FAS 8200A Renewall; FAS 2750A Renewal
- 2x Support Edge Premium 4hr Onsite (FAS 8200A Renewall) - 2x CS-WARRANTY-EXTENSION (FAS 8200A Renewall) - 2x SupportEdge Standard Part Replace 4hr (FAS 2750A Renewal) - 2x CS-WARRANTY-EXTENSION (FAS 2750A Renewal)
Angebotsfrist:11. Juni 2026
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
- 2x Support Edge Premium 4hr Onsite (FAS 8200A Renewall) - 2x CS-WARRANTY-EXTENSION (FAS 8200A Renewall) - 2x SupportEdge Standard Part Replace 4hr (FAS 2750A Renewal) - 2x CS-WARRANTY-EXTENSION (FAS 2750A Renewal)
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: Landesbetrieb Straßenwesen Brandenburg
- Veröffentlicht: 11. Mai 2026
- Frist: 11. Juni 2026
- Thema: IT-Support
Ausschreibungsbeschreibung
- 2x Support Edge Premium 4hr Onsite (FAS 8200A Renewall) - 2x CS-WARRANTY-EXTENSION (FAS 8200A Renewall) - 2x SupportEdge Standard Part Replace 4hr (FAS 2750A Renewal) - 2x CS-WARRANTY-EXTENSION (FAS 2750A Renewal)
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
1 Datei erfasst- Bekanntmachung.pdf
Ähnliche Bekanntmachungen
3CD-SEM Measurement System (IPMS-MRS03.1) - PR884397-2480-P
1 CD-SEM Measurement System Requirements for top-down measurement of critical dimensions of lines/spaces, holes/columns and other fine features, such as elongated hile/pillar patterns formed on semiconductor wafers during wafer fabrication, using a high-throughput CD-SEM. The system is used for processing MEMS wafers in a CMOS-compatible clean-roam class 10 (approx. ISO 4) production environment. Optional service items: 1.15 General requirements The system is equipped with an uninterruptible power supply (UPS). Yes 3.3 Measurement system The traceable certified standard is part of the delivery. The calibrations are not older than 20% of the recommended calibration interval at the time of delivery. Note: A traceable certified standard can be provided by the supplier. Otherwise, Fraunhofer IPMS will provide a VLSI-certified standard. Yes 4.16 Process The system is capable of performing 3D measurements using a tilted beam. Yes 4.17 Process The system can detect and visualize backscattered electrons (BSE). It is possible to perform CD measurements on the BSE image. Yes 8.2 Optional tool features Please provide an offer for a set of consumables (lamps, O-rings, valves, etc.). Yes 8.4 Optional tool features Please provide a separate offer for typical spare parts such as axis encoder, laser interferometer, etc. Yes 11.4 Extended Warranty Should offered extended warranty starting from the date on which the statutory warranty expires. An extended warranty of further 12 months should be offered. During the warranty period all support, repair and parts cost should be covered. 12 months
- TEKNOLOGIAN TUTKIMUSKESKUS VTT OYVTT
CONTRACT AWARD NOTICE: eVTOL Drone
The object of the tender process was the procurement of an unmanned aerial vehicle (UAV) system capable of electric vertical take-off and landing (eVTOL), suitable for environmental monitoring and aerial surveillance (hereinafter referred to as "the Device" or "the drone"). The device complied with mandatory technical and other requirements specified in detail in the invitation to tender. It included all necessary equipment, software, and documentation for both the aerial vehicle and the Ground Control Station (GCS). The device incorporated a GCS solution as part of the system and was designed to comply with SAIL III (Specific Assurance and Integrity Level III) standards. It was equipped with an integrated LiDAR sensor, object tracking capabilities, and support for Points of Interest (POI) functionality. The device enabled quick and straightforward unpacking and immediate commencement of operation. It was also configurable for different use cases and payload configurations. The device was a reliable aerial vehicle suitable which had been factory tested prior to client's acceptance of the delivery. Therefore, it had to be a commercial product. To ensure the maturity of the drone model offered, the tenderer provided details of five (5) completed reference deliveries of similar contracts. The major components of these drones were identical. Maintenance checks and possible calibrations of equipment were available, if needed, from the Supplier also after the warranty period had ended. The Supplier guaranteed the availability of spare parts also after the warranty period (2 years) had ended. The object of the tender process was described in more detail in the invitation to tender documents. As a result of the competitive bidding VTT reserved the right to select a primary and a backup supplier. The backup supplier was used in case the primary supplier failed to deliver the device in time.
10004174 - Engineering support for the development of up to three PtL pilot plants in up to three countries
The International Power-to-X Hub supports the transition to climate-neutral industries and economies by advancing sustainable Power-to-X solutions in sectors where direct electrification is not yet feasible, especially aviation, maritime transport and energy-intensive industries. The project is implemented by Deutsche Gesellschaft fuer Internationale Zusammenarbeit (GIZ) GmbH on behalf of the German Federal Ministry for the Environment, Climate Action, Nature Conservation and Nuclear Safety (BMUKN). It is financed through the International Climate Initiative as part of Germany"s hydrogen and Power-to-X policy framework. Power-to-X enables the production of fuels and chemical feedstocks from renewable electricity and sustainable carbon or nitrogen sources and therefore helps replace fossil-based inputs while supporting climate protection, industrial transformation and sustainable economic development. The subject of this tender is providing technical support for the development of up to three Power-to-Liquid pilot plants in up to three countries. The assignment provides up to three industrial partner companies with customised engineering documents and advisory services to advance PtL pilot plant projects to FEED/EPC tendering stage. The requested services cover the full project development pathway from concept definition and selection through comparative techno-economic feasibility assessment and conceptual engineering to advice on procurement and tender strategy and, where required, support for the preparation of functional FEED/EPC tender documents. The contract is structured into four work packages in two implementation steps. In Work Packages A and B, the contractor shall review existing concepts and documentation, consult each partner, refine or propose PtL plant concepts, advise on feedstock and utility sourcing, process technologies, offtake markets, regulation and certification, conduct kick-off meetings and site visits, and prepare Concept and Site Analysis Reports with comparative assessments and recommendations. The contractor shall also deliver partner trainings and prepare comparative techno-economic feasibility studies for up to two plant concepts per partner, including a book of assumptions, process simulation, technical descriptions, preliminary process flow diagrams, equipment sizing, interface definitions, certification compliance assessment, CAPEX and OPEX estimates, economic modelling, risk analysis and concept recommendations. Preliminary results shall be discussed with each partner in an interactive workshop to validate assumptions, review trade-offs and support concept selection. Subject to confirmation by the partner and GIZ, Work Package C covers FEL-2 conceptual engineering for the selected concept and a refined Class 4 AACE cost estimate. This includes advisory support on site development, permitting and certification, preparation of an integrated project execution plan, partner trainings on PtL process simulation and plant engineering, and an FEL-2 engineering package comprising Basis of Design specifications, process descriptions, drawings, equipment lists, preliminary equipment specifications, interface and battery limit definitions, input and output specifications, and QA/QC and HSE requirements. The engineering work shall be carried out in close coordination with the partner and GIZ and shall include advice on technology and licensor options as well as updated CAPEX estimates, economic models and key project indicators. Where sustainable CO2 supply is not readily available, the services may also include, for one project, the screening of potential sustainable carbon sources and the design of a CCU system including FEL-1 engineering package and CAPEX assessment. In a subsequent stage, the contractor shall advise on FEED/EPC procurement and tender strategy and, where required, prepare the functional tender specifications, including design basis, technical and performance specifications, scope of supply and services, site and utility information, HSE and QA/QC requirements and project schedule elements in line with the partner"s procurement framework and international standards. The contractor shall also provide advice on commercial and legal terms during tender preparation. For one partner, the services may further include support during the FEED/EPC tendering process, including bidder communication, clarification support, qualification and bid evaluation assistance, preparation of evaluation notes and support during negotiations. Throughout implementation, the contractor shall also provide cross-cutting knowledge exchange, monitoring, reporting, backstopping and coordination services.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 11. Juni 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Landesbetrieb Straßenwesen Brandenburg.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.