CONTRACT AWARD NOTICE: eVTOL Drone
The object of the tender process was the procurement of an unmanned aerial vehicle (UAV) system capable of electric vertical take-off and landing (eVTOL), suitable for environmental monitoring and aerial surveillance (hereinafter referred to as "the Device" or "the drone"). The device complied with mandatory technical ...
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
The object of the tender process was the procurement of an unmanned aerial vehicle (UAV) system capable of electric vertical take-off and landing (eVTOL), suitable for environmental monitoring and aerial surveillance (hereinafter referred to as "the Device" or "the drone"). The device complied with mandatory technical and other require...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: TEKNOLOGIAN TUTKIMUSKESKUS VTT OY
- Veröffentlicht: 27. April 2026
- Frist: Nicht angegeben
Ausschreibungsbeschreibung
The object of the tender process was the procurement of an unmanned aerial vehicle (UAV) system capable of electric vertical take-off and landing (eVTOL), suitable for environmental monitoring and aerial surveillance (hereinafter referred to as "the Device" or "the drone"). The device complied with mandatory technical and other requirements specified in detail in the invitation to tender. It included all necessary equipment, software, and documentation for both the aerial vehicle and the Ground Control Station (GCS). The device incorporated a GCS solution as part of the system and was designed to comply with SAIL III (Specific Assurance and Integrity Level III) standards. It was equipped with an integrated LiDAR sensor, object tracking capabilities, and support for Points of Interest (POI) functionality. The device enabled quick and straightforward unpacking and immediate commencement of operation. It was also configurable for different use cases and payload configurations. The device was a reliable aerial vehicle suitable which had been factory tested prior to client's acceptance of the delivery. Therefore, it had to be a commercial product. To ensure the maturity of the drone model offered, the tenderer provided details of five (5) completed reference deliveries of similar contracts. The major components of these drones were identical. Maintenance checks and possible calibrations of equipment were available, if needed, from the Supplier also after the warranty period had ended. The Supplier guaranteed the availability of spare parts also after the warranty period (2 years) had ended. The object of the tender process was described in more detail in the invitation to tender documents. As a result of the competitive bidding VTT reserved the right to select a primary and a backup supplier. The backup supplier was used in case the primary supplier failed to deliver the device in time.
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
10- TEKNOLOGIAN TUTKIMUSKESKUS VTT OYVTTFrist: 25. Mai
DUV Stepper 200mm
THE OBJECT OF THE TENDER PROCESS The object of the procurement is DUV Stepper 200 mm. The technical specification of the object of the tender and its minimum requirements is described in more detail in this Annex 1 of the invitation to tender. The tendered Tool must comply with all technical properties and functionalities, performance specifications and acceptance criteria as set out in Annex 1 and Annex 2 (“Facilities, materials and connector types”). A tender which does not meet one or more of the requirements specified in the Annex 1 and Annex 2, may be rejected for failing to comply with the call for tenders. The comparison criterion for the tenders is economic advantageous (see section "Grounds for decision") with 80 % price weighting and 20 % quality weighting. A reference price has to be given for the equipment that meets all the requirements set in the invitation to tender, especially its Annex 1. Partial tenders will not be accepted. NON-MANDATORY OPTIONAL FEATURES Please see Annex 1 section 2.7 of the invitation to tender.
- EnerginetFredericia
Contract Award Notice - Energinet, CAR Insurance, AC Lindehøj
The procurement covers Construction, Third-Party Liability, Terrorism and Environmental Impairment Liability insurance and involves the following 4 lots:Lot 1. Class of Insurance: Onshore Construction All Risks (CAR)Lot 2. Class of Insurance: Third-Party Liability Insurance.Lot 3. Class of Insurance: Terrorism Insurance.Lot 4. Class of Insurance: Environmental Impairment Liability Insurance.The procurement is conducted as a negotiated procedure with prior call for competition. Energinet reserves the right to award the contract based on the initial tender.There is no remuneration to participants in the negotiations.Costs incurred by the tenderer in connection with the preparation and submission of a tender for one or more lots are the tenderers to bear and will not be reimbursed.There is anticipated to be one negotiation meeting held via Microsoft Teams.
- Munster Technological University.TraleeFrist: 27. Apr.
Call for Tender (CFT) to establish Services Contract for a Software Solution for Curriculum Management, Curriculum Presentation and Curriculum Delivery and Resource Planning
The purpose of this Competition is to establish a Contract with a single supplier for the provision of suitable Curriculum Management, Curriculum Presentation and Curriculum Delivery and Resource Planning solutions on behalf of MTU. Please refer to the tender documents attached to this Contract Notice.
- Metro Service A/SKøbenhavn S
Contract Award Notice - General Product & Liability Insurance for Metro Service A/S
The procurement is conducted as a negotiated procedure with prior call for competition.The procurement covers General Product & Liability Insurance for Metro Service A/S and involves the following lots:Lot 1: General Product & Liability Insurance, Primary layerClass of Insurance: DKK 300.000.000 per claim and in the annual aggregateLot details: The tenderers are required to bid for the full lot. The tenderers are requested to submit bids according to the enclosed Requirements Specification.Lot 2
- EnerginetFredericiaFrist: 30. Apr.
Voluntary ex ante transparency notice - Contract Award Notice - Energinet, Insurance Procurement, Project Hatting-Ryttergård, Lot 4
Insurance procurement for Construction/Erection All Risks insurance including Marine Cargo and extended maintenance for project: Hatting Ryttergård. Energinet reserves the right to award the contract based on the initial tender. There is no remuneration to participants in the negotiations. Costs incurredby the tenderer in connection with the preparation and submission of a tender for one or more lots are the tenderers to bear and will not be reimbursed. There is anticipated to be one negotiation
- Cork City CouncilCork
Provision of Road Marking Thermoplastic (White and Yellow) Screed Vehicle, for Cork City Council
Tenders are sought for the supply and delivery of road marking thermoplastic (white and yellow) screed vehicle. Tenderers must provide the specifications certifications of the equipment in adherence to international standards, including ease of maintenance, technical assistance, length of warranty and after sales service offered. Tenderers must provide a minimum one year warranty for all Thermoplastic (screed) vehicle bodywork.
- STATSBYGGOSLO
2025/4821 Framework agreement for pest control and control - Operation area South-East
A framework agreement will be signed with a tenderer to cover Statsbygg ́s need for pest control and control. See the tender invitation with annexes for a description of the requirements and needs.
- Københavns Lufthavne A/SKastrupFrist: 01. Mai
Purchase of ETD (Explosive Trace Detection) equipment
With this invitation to tender, the Contracting Entity intends to invite tenders for submission of a tender for 80 units of ETD’s (Explosive Trace Detection) with delivery end September 2026 to end 2028. Further, the Contracting Entity needs an option for up to 20 units more in the same period, ordered and delivered after agreement in batches of 5 units. The requirements for the service and the requirements in respect of the contract terms appear from the draft Agreement with appendices.
- TEKNOLOGIAN TUTKIMUSKESKUS VTT OYVTTFrist: 09. Mai
Ion beam trimmer
The object of the tender is 200 mm wafer particle beam trimming tool for VTT Micronova cleanroom semiconductor front end processing. The particle beam may be an ion beam, or a gas cluster beam, with a full width at half maximum within 3-15 mm. The tool must be compatible with installation in an ISO 4 classified cleanroom. The object of the tender process is described in more detail in the invitation to tender documents.
- TEKNOLOGIAN TUTKIMUSKESKUS VTT OYVTTFrist: 11. Mai
Vacuum laminator for multilayer flexible electronics
The object of the tender is Large-area offline vacuum lamination equipment. Purpose of use includes, but is not limited to, bonding films or sheets together to produce bubble-free multilayer laminates, and coverlay/protective lamination with thermoplastic adhesive systems. Main application areas are wearable, flexible and stretchable electronics. Used materials are thermoplastic polyurethane (TPU), TPU with hot melt layer, pressure sensitive adhesive (PSA) or equivalent in film format. Operational environment is medical device pilot line in clean room facilities. The object of the tender process is described in more detail in the invitation to tender documents.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist TEKNOLOGIAN TUTKIMUSKESKUS VTT OY.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.