Framework Agreement Pre-insulated Pipes & Valves
Framework Agreement for pre-insulated pipes & valves for Vattenfall Heat Sweden. Tender shall be submitted in Swedish or English. General Terms: ABM 07
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
Framework Agreement for pre-insulated pipes & valves for Vattenfall Heat Sweden. Tender shall be submitted in Swedish or English. General Terms: ABM 07
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: Vattenfall AB Indirect
- Veröffentlicht: 22. April 2026
- Frist: Nicht angegeben
Ausschreibungsbeschreibung
Framework Agreement for pre-insulated pipes & valves for Vattenfall Heat Sweden. Tender shall be submitted in Swedish or English. General Terms: ABM 07
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
10- Eigersund KommuneEGERSUNDFrist: 22. Apr.
Framework agreement - Pipes and pipe parts
Eigersund municipality is holding an open tender contest for a framework agreement for the delivery of pipes and pipe parts.
- Larvik kommuneLARVIKFrist: 06. Apr.
Framework agreement plumbing heating installations
Larvik municipality shall enter into a framework agreement with a tenderer for the installation, repair and service of heat sources such as oil burner, heat pumps and electric heat systems.
- UNIVERSITETET I BERGENBERGENFrist: 04. Mai
ANSK-25-0663 Framework agreement water analyses and legionella prevention.
UiB shall procure a framework agreement for water analyses and legionella prevention. A framework agreement shall be signed with one tenderer.
- UNIVERSITETET I BERGENBERGEN
ANSK-25-0639 Framework agreement business brokering with consultancy services
UiB shall procure a framework agreement for commercial brokerage services with consultancy services. A framework agreement shall be signed with one tenderer.
- Gas Networks IrelandCorkFrist: 09. Apr.
25/064 - Qualification System for for the provision of Polyethylene (PE) Pipe, Fittings and Valves
The objective of this QSQ is to qualify Applicants onto the Qualifications System for the manufacturing and supply of Polyethylene (PE) Pipe, Fittings and Valves for Gas Networks Ireland. The proposed supply requirements are to be divided into four (4) separate lots as detailed below: • Lot 1 (PE Pipe 90mm - 400mm) – Manufacture and supply of PE pipe for gas. • Lot 2 (PE Pipe 20mm - 63mm) – Manufacture and supply of PE pipe for gas. • Lot 3 (PE Fittings) Manufacture and/or supply of PE Fittings for gas. These include but are not limited to PE; caps, couplings, elbows, equal tees, flange adaptors, reducers, tee branch saddles, tees, tapping tees, G clamp adaptors, multi tap tees, branch saddles, bends, unequal tees and end caps. • Lot 4 (PE ball valves) – Manufacture and/or supply of PE Valves for gas. These include but not limited to valves ranging in size from small diameter 20mm to larger diameters up to 315 mm. Please note: Lots 1 and 2 relate to manufacture and supply requirements. Lots 3 and 4 relate to manufacture and/or supply requirements. The requirements for the manufacture and/or supply of pipes, fittings and valves under this Qualification System will include arrangements for delivery to various stipulated depot destinations on the island of Ireland and the ability to operate a national distribution network. Applicants should note that from time to time over the term of the Qualification System, the Contracting Entity, at its sole discretion but without altering the overall nature of the Qualification System, may modify the Qualification System to reflect changes in its requirements. Such modifications may include changes to the pipe diameter and pressure rating which may result in an increase to the pipe size, wall thickness and pipe properties or specification and the provision of services or additional supplies associated with such changes. The Contracting Entity will also seek similar changes to pipe fittings and valves. The conditions under which such an option may be exercised by the Contracting Entity will be outlined in the relevant call off competition document. The Contracting Entity also reserves the right to add additional lots to the Qualification System. Applicants may apply for qualification in one or more lots. At the discretion of the Contracting Entity a full site visit and audit of the prospective Qualified applicants supply chain manufacturing facility(s) will be carried out to validate and support their pre-qualification submission. In the event of a site visit and audit being carried out to pre-qualify the Supplier must successfully pass this site inspection audit. It is envisaged that the scope of products and services of the initial Call for Competition to be drawn-down under the Qualification System will be, but not limited to; PE pipes, fittings and valves and will cover the following: 1. Standards: • Gas - as per I.S. EN 1555 or equivalent. 2. Indicative Diameter Range: • PE pipe, fittings and valves ranging in size from small diameter 20mm to large diameter 400 mm pipe and fittings. 3. Indicative Pipe Specification/Types: • Solid wall pipe; • Coextruded pipe; • Peelable pipe; and 4. Indicative Pressure Range and Pipe Materials : Pipe Material/Description Pressure Range (Barg) PE 100 (SDR 11) 7 PE 80 (SDR 11) 4 PE 100 (SDR 17) 4 PE 80 (SDR 17) 2 5. Colour • PE80: solid wall PE pipe in yellow colour • PE80: c-extruded wall PE pipe with outer layer in yellow colour • PE100: solid wall PE pipe in orange colour (sizes 180mm and above) • PE100: PE 100 PE pipe with peelable outer layer in yellow colour (with stripes) • Pipes for proof-of-concept hydrogen projects shall be yellow with blue axial stripes.
- Vestland fylkeskommuneLEIKANGER
R05 Framework agreement shelter terminals
Vestland County shall procure a long-term framework agreement for shelters, toilet facilities, break rooms and parts for maintenance. All entities in the county municipality shall have the possibility to use the framework agreement. The contracting authority will be able to use this framework agreement for any call-offs for light rail development, on construction stages 5 and 6.
- Eigersund KommuneEGERSUNDFrist: 19. März
Framework agreement - Painting services
Eigersund municipality is holding an open tender contest for a framework agreement for painting services, internally and externally. Tenderers shall also be able to provide floor laying services. The framework agreement also includes the procurement of materials that the contracting authority shall use for work that is carried out by itself.
- Eigersund KommuneEGERSUNDFrist: 19. März
Framework agreement - Painting services
Eigersund municipality is holding an open tender contest for a framework agreement for painting services, internally and externally. Tenderers shall also be able to provide floor laying services. The framework agreement also includes the procurement of materials that the contracting authority shall use for work that is carried out by itself.
- Alta kommuneAltaFrist: 22. Mai
Office Furniture Framework Agreement
Alta municipality invites tenderers to an open tender contest without negotiations for a framework agreement for the procurement of furniture and fixtures for offices. The aim is to establish a framework agreement with a furniture supplier who ensures access to environmentally friendly furniture of high quality, with a focus on sustainability and that has a long lifetime. The offered products shall have good functionality and user friendliness, and be suitable for the public entities included in this agreement. Furthermore, the products must have a clean and timeless design that fits into every working environment. The products shall be universally designed, i.e. the products for general use shall be designed so that all persons shall be able to use them. Furthermore, the products shall have good ergonomics and comfort. The contract shall be valid for 2 years, with an option for an extension for one year at a time for a further two years. See the tender documentation for further information.
- Oppdal KommuneOppdalFrist: 20. Mai
Framework agreement for electrician services
Oppdal municipality, c/o the technical unit, shall enter into a framework agreement with one tenderer for electrician services connected to operation and maintenance, as well as minor projects of buildings and other installations that Oppdal municipality owns or uses for which the technical services are responsible. The framework agreement does not include fixed service assignments etc. or major projects. See the tender documentation for a complete description of the procurement.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Vattenfall AB Indirect.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.