Financing Agrement signed between Türkiye EU Comission
The system shall consist of a continuous powder-liquid mixing and dispersion unit specifically designed for high-density ceramic slurry, powered by a motor with a capacity of 25-35 kW. Mixing plants shall be available with Maximum Total Flow Ceramic slurry (ceramic slip: solid + liquid) : Approx. 10.000 l/h - 15.000 l/...
Angebotsfrist:17. Mai 2026
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
The system shall consist of a continuous powder-liquid mixing and dispersion unit specifically designed for high-density ceramic slurry, powered by a motor with a capacity of 25-35 kW. Mixing plants shall be available with Maximum Total Flow Ceramic slurry (ceramic slip: solid + liquid) : Approx. 10.000 l/h - 15.000 l/h. (depending on ...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: Kaleseramik Canakkale Kalebodur Seramik Sanayi A.S.
- Veröffentlicht: 18. März 2026
- Frist: 17. Mai 2026
Ausschreibungsbeschreibung
The system shall consist of a continuous powder-liquid mixing and dispersion unit specifically designed for high-density ceramic slurry, powered by a motor with a capacity of 25-35 kW. Mixing plants shall be available with Maximum Total Flow Ceramic slurry (ceramic slip: solid + liquid) : Approx. 10.000 l/h - 15.000 l/h. (depending on the density of the final product). Maximum Powder Capacity shall reach : Approx. 2000-5000 kg/h. Featuring a rotor and stator coated with stainless steel AISI 316
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
4- ZAL Zentrum für Angewandte Luftfahrtforschung GmbHHamburgFrist: 29. Mai
ZAL (Hamburg): Test bench consisting of a climate and altitude chamber to operate hydrogen powered fuel cell systems at the Hanseatic Hydrogen Center for Aviation and Maritime (H2AM)
The following requirements apply to the test bench needed to operate hydrogen-powered fuel cell systems at ZAL: -The size of the expected test objects will be minimum 4 m x 1 m x 1.5 m (L x W x H). The test bench shall therefore consist of a climate and altitude chamber, the necessary aggregates to operate the fuel cell system and a ready-to-use operators user interface. -The climate and altitude chamber shall be able to simulate temperature, pressure and humidity according to International Standard Atmosphere (ISA) with a rate of change equivalent to 2.800 ft/min. -Aggregates to operate the fuel cell system shall include but are not limited to a balance of plant power supply, an electric load, a hydrogen supply system, a cooling system and an air system for the supply of the fuel cell systems cathode path. -All operational parts shall be controlled via a ready-to-use semi-automated central control system which allows the customer to run scripted test procedures as well as to use single operating points. -All legal and regulatory requirements for an operation in Europe, Germany and the city of Hamburg must be applied. -ZAL already operates supply infrastructures for hydrogen, process air, power supply etc., which will be extended to supply the test bench. The extension of the supply infrastructure is not part of this tender. Further information can be found in the procurement documents that will be issued after the conclusion of the participation competition.
- ZAL Zentrum für Angewandte Luftfahrtforschung GmbH
ZAL (Hamburg): Test bench consisting of a climate and altitude chamber to operate hydrogen powered fuel cell systems at the Hanseatic Hydrogen Center for Aviation and Maritime (H2AM)
The following requirements apply to the test bench needed to operate hydrogen-powered fuel cell systems at ZAL: -The size of the expected test objects will be minimum 4 m x 1 m x 1.5 m (L x W x H). The test bench shall therefore consist of a climate and altitude chamber, the necessary aggregates to operate the fuel cell system and a ready-to-use operators user interface. -The climate and altitude chamber shall be able to simulate temperature, pressure and humidity according to International Standard Atmosphere (ISA) with a rate of change equivalent to 2.800 ft/min. -Aggregates to operate the fuel cell system shall include but are not limited to a balance of plant power supply, an electric load, a hydrogen supply system, a cooling system and an air system for the supply of the fuel cell systems cathode path. -All operational parts shall be controlled via a ready-to-use semi-automated central control system which allows the customer to run scripted test procedures as well as to use single operating points. -All legal and regulatory requirements for an operation in Europe, Germany and the city of Hamburg must be applied. -ZAL already operates supply infrastructures for hydrogen, process air, power supply etc., which will be extended to supply the test bench. The extension of the supply infrastructure is not part of this tender. Further information can be found in the procurement documents that will be issued after the conclusion of the participation competition.
- Oslo kommune v/ Bydel GrünerløkkaOsloFrist: 13. Mai
Day centre transport by minibus of persons with dementia and disabilities.
PURPOSE AND SCOPE The aim of the procurement is to cover the need for transport services, including drivers and auxiliary zones, to and from day activities and senior centre offers in the district. There are 19 people with normal driving who need daily transport. This can be changed over time and changes will be reported once per ocean year. The maximum number of persons will not exceed 25. All transport shall be carried out by vehicles that are powered with electricity or hydrogen in order to reduce CO2 emissions and contribute to Oslo municipality ́s green profile. From 01.01.2025, all deliveries/assignments for Oslo municipality where transport is a part of the service, shall be undertaken by using zero emission (i.e. battery electric or hydrogen) or biogas technology that as a minimum fulfils euro class 6/ VI. The contract has an annual estimated value of NOK 1,500,000. The contracting authority draws attention to the fact that the estimate is based on previous consumption, historical data and the expected future need. This contract is valid for up to a maximum value of NOK 6,000,000, including any option for a 2 year extension. The estimate is only a guideline and is without obligation for the Contracting Authority. Transport of up to 19 people with up to 4 wheelchair users is required. The number can be changed with each new order made every six months. The change can be both a reduction of persons with a need for changing the number of wheelchair users, changing the number that shall be transported in the form of reduction and increase. An increase will normally not be more than 2 - 3 persons. The contracting authority envisages that two vehicles will be used for the assignment. According to the oslo municipality's rules, none of the vehicles can use fuel that is used. In addition to the drivers, the tenderer must offer a permanent person/helper who shall assist in transporting the users. An attendant from the day centre will also assist with the transport. The urban district orders day centre places every half year according to the district ́s need, and the district will notify the carrier of any changes when the order is made. The district has a maximum need of 12 places at Sofienberg day centre plus an attendant from the day centre and 7 at Økern day centre plus an attendant from the day centre. However, this may change over time. See the description of changes to the number of persons with a need for transport in point one. In total, Økern day centre has day places for 7 users with dementia, and Sofienberg day centre has day places for 12 users. The users shall be picked up and delivered all business days outside of Saturday and Sunday. Tenderers shall ensure daily transport of elderly persons between their residence and the following two day centres: Økern Day Centre (Kingosgate Residential and Rehabilitation Centre), Kingosgate 14-16 Sofienberg day centre (sofienberg centre), Helgesensgate 62. To and from Økern Day Centre: · 08:30 with 1 bus that picks up day centre users at their homes and drives them to the day centre within approx. 09:00. They will not be picked up at home until 08:30. · At 14:00, one bus will be picked up for the same people at the day centre and drive them home. To and from Sofienberg day centre · 09:00 with 1 bus that picks up day centre users at their homes and drive them to the day centre within approx. 10.00. · At 14:45 a.m., one bus will pick up the same people at the day centre and drive them home. There are up to 19 persons each day who shall be picked up and driven to the day centre. The number of persons going to Økern day centre and Sofienberg day centre will vary. The parties to the contract can reach agreement on other times. If the opening hours are changed, the date of transport to and from can be changed accordingly. Both centres are closed on weekends, public holidays, Christmas Eve and New Year's Eve. Before the assignment, employees at the day centres will make the tenderer aware of the needs of each user so that the transport can be adapted to this. It can, for example, be whether the user uses a wheelchair, type of wheelchair, any need for stair climbers, a need to be followed to the entrance door etc. Tenderers will get lists from the day centres with an overview of each user, addresses, any changes to lists and other necessary information about users. There will be some waiting time for the collection, as users may not always be ready on time. The users who use the tender will vary, and for this reason there will be some variation in which addresses the drivers shall collect and deliver users from. Not all users are able to walk by their own help with the vehicles. It is therefore necessary that the users are picked up as close to the entrance door as possible. Some users also have dementia and must be followed to/from a vehicle and their own home.
- STATSBYGGOSLO
1105601 UiO Life Sciences user equipment. K930.29.01 Sequentator
Statsbygg constructs the new Life Sciences Building (LVB) for the University of Oslo and Oslo University Hospital on behalf of the Ministry of Education and Research and South-East Health as the co-contracting authority. The building shall be the workplace for approx. 1,600 employees and 1,600 students. Start up for the excavation and ground work was the second quarter of 2019 and the planned completion is at the end of 2026. Various professional environments shall work multi-disciplinary here to develop new solutions for major challenges within health and sustainability with access to the best and most modern equipment required to carry out world class research, teaching and innovation. FOA § 13-4 letter b. no. 2: The procurement concerns services that only a specific supplier can deliver, for technical reasons, as well as § 13-4 letter b. no. 3. A compact and flexible sequencing instrument shall be procured for use at the Department of Medical Genetics at the University of Oslo, affiliated with NorSeq – the national research infrastructure for sequencing. The instrument shall be used for quality control (QC) of sequencing libraries, small scale genome sequencing and verification sequencing, as well as included in the service offer to researchers with a need for low to moderate data amounts. The instrument shall be able to sequence a broad range of species and applications, as well as function as a QC tool for genome-scale sequencing instruments. To fulfil this purpose, the following required minimum requirements are set for the instrument: Support for a wide range of genomic applications, including 2×500 bp paired-end sequencing with high data quality sequencing capacity up to 30 Gb per run, with flexible adaptation of data quantity Sequencing time of maximum 24 hours for 2×300 bp set-up Flexibility in cycle numbers (minimum 100, 300, 600 and 1000 cycles) Use of ready-produced reagent cassettes and reagents that can be handled and stored at room temperature Support for index-first sequencing and fast generation of index reads for quality control and optimisation of sample pooling Full compatibility with Illumina libraries, so that the instrument can be used as a QC platform for existing large scale sequencing systems Delivery of sequence data with a minimum of Q30 quality at relevant read lengths. The requirements are determined based on the contracting authority ́s actual need for efficient operation, high data quality, quick execution and seamless integration with the existing infrastructure and work flow. Market assessment and alternative solutions The Contracting Authority has carried out a market survey (RFI) via Mercell/Doffin. Only one tenderer registered interest and documented fulfilment of all the minimum requirements. Furthermore, the contracting authority has assessed alternative technologies and suppliers based on the professional environment ́s knowledge of the market. These alternatives do not, however, fulfil the requirement, i.a. because they:do not support 2×300 bp paired-end sequencing of equivalent quality has significantly longer sequencing time than 24 hours for equivalent set-ups not compatible with Illumina libraries and therefore cannot be used for quality control of existing systemsnot offer the necessary flexibility in data capacity up to 30 Gb per running that does not support 'index-first' sequencing or rapid generation of read indexsUse of such alternative solutions will lead to significant disadvantages, including reduced data quality, inefficient use of resources, increased time spent and a lack of integration with existing infrastructure. This is seen as disproportionately against the objective of the procurement. Conclusion: Based on the set requirements and completed market surveys, the contracting authority has no real or reasonable alternatives in the market than MiSeq i100 Plus from Illumina. This is as far as the contracting authority is aware of the only system that fulfils all functionality, performance and compatibility requirements. The terms in PPR § 13-4 letter b no. 2 and are therefore considered fulfilled. If questions are asked, please contact Alf Årdal by email: Alf.Petter.Aardal@statsbygg.no Deadline for objections is 10 days from the date of publication.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 17. Mai 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Kaleseramik Canakkale Kalebodur Seramik Sanayi A.S..
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.