Construction of Trabzon Water Supply System - Completion Works
The scope of work is summarised as below: a) 2600 house connections between the new distribution pipeline and the subscribers” water meter using PE pipes with diameter DN32 to DN 110 and 15.600 m house connection pipe line per an average connection length of approximately 6 m b) Functional SCADA system consisting of co...
Angebotsfrist:21. Juli 2026
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
The scope of work is summarised as below: a) 2600 house connections between the new distribution pipeline and the subscribers” water meter using PE pipes with diameter DN32 to DN 110 and 15.600 m house connection pipe line per an average connection length of approximately 6 m b) Functional SCADA system consisting of computer hardware a...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: Department of Project Implementation (DoPI), General Directorate of European Union and Foreign Relations (DGEUFR), Ministry of Environment, Urbanization and Climate Change (MoEUCC)
- Veröffentlicht: 21. April 2026
- Frist: 21. Juli 2026
Ausschreibungsbeschreibung
The scope of work is summarised as below: a) 2600 house connections between the new distribution pipeline and the subscribers” water meter using PE pipes with diameter DN32 to DN 110 and 15.600 m house connection pipe line per an average connection length of approximately 6 m b) Functional SCADA system consisting of computer hardware and software in compliance with the existing SCADA system of the End Recipient c) Construction of 16 underground flowmeters, 1 PRV chamber fitted and 7 Residual Chlorine Measurement Equipment d) Construction of additional water distribution network pipelines diameter DN110 to DN 225 ( appr. 48.500 m ) and DN250 to DN630 (appr.1500m) e) Construction of 9000 m water mains DN 630 and DN1000 f) Construction of total 18 underground air valves chambers and the discharge valve chambers g) Installation of 1055 missing valve box h) Supply and installation of 51 PRV chambers, missing ventilation pipes, missing manometers, missing valves, missing fittings and other items
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
10- Prilep MunicipalityPrilepFrist: 14. Apr.
Integration of distribution locations from the watersupply system of Prilep City into the existing SCADA system and GIS system (PUE "Water Supply and Sewage")
Integration of distribution locations from the watersupply system of Prilep City into the existing SCADA system and GIS system (PUE "Water Supply and Sewage")
- Gas Networks IrelandCorkFrist: 09. Apr.
25/064 - Qualification System for for the provision of Polyethylene (PE) Pipe, Fittings and Valves
The objective of this QSQ is to qualify Applicants onto the Qualifications System for the manufacturing and supply of Polyethylene (PE) Pipe, Fittings and Valves for Gas Networks Ireland. The proposed supply requirements are to be divided into four (4) separate lots as detailed below: • Lot 1 (PE Pipe 90mm - 400mm) – Manufacture and supply of PE pipe for gas. • Lot 2 (PE Pipe 20mm - 63mm) – Manufacture and supply of PE pipe for gas. • Lot 3 (PE Fittings) Manufacture and/or supply of PE Fittings for gas. These include but are not limited to PE; caps, couplings, elbows, equal tees, flange adaptors, reducers, tee branch saddles, tees, tapping tees, G clamp adaptors, multi tap tees, branch saddles, bends, unequal tees and end caps. • Lot 4 (PE ball valves) – Manufacture and/or supply of PE Valves for gas. These include but not limited to valves ranging in size from small diameter 20mm to larger diameters up to 315 mm. Please note: Lots 1 and 2 relate to manufacture and supply requirements. Lots 3 and 4 relate to manufacture and/or supply requirements. The requirements for the manufacture and/or supply of pipes, fittings and valves under this Qualification System will include arrangements for delivery to various stipulated depot destinations on the island of Ireland and the ability to operate a national distribution network. Applicants should note that from time to time over the term of the Qualification System, the Contracting Entity, at its sole discretion but without altering the overall nature of the Qualification System, may modify the Qualification System to reflect changes in its requirements. Such modifications may include changes to the pipe diameter and pressure rating which may result in an increase to the pipe size, wall thickness and pipe properties or specification and the provision of services or additional supplies associated with such changes. The Contracting Entity will also seek similar changes to pipe fittings and valves. The conditions under which such an option may be exercised by the Contracting Entity will be outlined in the relevant call off competition document. The Contracting Entity also reserves the right to add additional lots to the Qualification System. Applicants may apply for qualification in one or more lots. At the discretion of the Contracting Entity a full site visit and audit of the prospective Qualified applicants supply chain manufacturing facility(s) will be carried out to validate and support their pre-qualification submission. In the event of a site visit and audit being carried out to pre-qualify the Supplier must successfully pass this site inspection audit. It is envisaged that the scope of products and services of the initial Call for Competition to be drawn-down under the Qualification System will be, but not limited to; PE pipes, fittings and valves and will cover the following: 1. Standards: • Gas - as per I.S. EN 1555 or equivalent. 2. Indicative Diameter Range: • PE pipe, fittings and valves ranging in size from small diameter 20mm to large diameter 400 mm pipe and fittings. 3. Indicative Pipe Specification/Types: • Solid wall pipe; • Coextruded pipe; • Peelable pipe; and 4. Indicative Pressure Range and Pipe Materials : Pipe Material/Description Pressure Range (Barg) PE 100 (SDR 11) 7 PE 80 (SDR 11) 4 PE 100 (SDR 17) 4 PE 80 (SDR 17) 2 5. Colour • PE80: solid wall PE pipe in yellow colour • PE80: c-extruded wall PE pipe with outer layer in yellow colour • PE100: solid wall PE pipe in orange colour (sizes 180mm and above) • PE100: PE 100 PE pipe with peelable outer layer in yellow colour (with stripes) • Pipes for proof-of-concept hydrogen projects shall be yellow with blue axial stripes.
- KD VODOVOD I KANALIZACIJA d. o. o.Rijeka
Improvement of water and wastewater infrastructure in the Gorski Kotar Region, Croatia
LOT 1 - Rehabilitation of water supply pipelines in part of the settlement of Lokve – DIP settlement and construction of public sewer system of the settlement of Lokve – PART 1. The project includes the construction of sanitary sewers in part of the Lokve agglomeration (DIP settlement) in the length of 246.50 m', rehabilitation of part of the water supply system of Lokve (DIP settlement) in the length of 383.77 m', inspection of state, development of implementation designs, as-built surveys, reports on as-built state and supporting documents necessary for works performance and obtaining Use Permits;LOT 2 - Construction of the water supply system and public sewer system in the municipality of Ravna Gora (Cagar) and rehabilitation of a section of water pressure pipeline PS Šije – WT Kosa. The project includes the construction of the water supply pipeline in the length of 835.00 m' and construction of the public sewer system in the length of 722.18 m' in the settlement of Cagar, and rehabilitation of the water pressure pipeline PS Šije – WT Kosa in the length of 387.78 m', with the development of implementation designs, as-built survey, report on as-built state and supporting documents necessary for works performance and obtaining Use Permits;LOT 3 - Rehabilitation of transmission pipeline WT Sv. Ilija – WT Nadvučnik. The project includes the construction of a bypass, the replacement of 7,449 m, and the development of implementation designs, as-built surveys, reports on as-built state and supporting documents necessary for works performance and obtaining Use Permits.
- Lillestrøm KommuneLillestrømFrist: 30. Apr.
Full power system for sepraration of waste water and surface water on existing pipes etc.
The contract is for the procurement of a full power system such as: • enables separation of waste water and surface water into existing pipes, • requires minimal excavation and sheet piling, • functions under the municipality ́s demanding terrain and fall conditions, • have technology that safeguards both function, capacity and self-cleaning, • allows house owners to self-fall solutions up to the municipal manhole, with alternatives for properties without a sufficiently high height. The system i
- Hå kommuneVARHAUGFrist: 12. Mai
Framework agreement for the procurement of Water and Sewage parts, PVC pipes, cast iron pipes, water pipeline fixtures and parts etc.
Hå municipality, hereafter called the contracting authority, invites tenderers to a competition for the delivery of PVC pipes, water pipeline fixtures and parts for sites and projects carried out on their own.
- Hå kommuneVARHAUGFrist: 24. Apr.
Framework agreement for the procurement of Water and Sewage parts, PVC pipes, cast iron pipes, water pipeline fixtures and parts etc.
Hå municipality, hereafter called the contracting authority, invites tenderers to a competition for the delivery of PVC pipes, water pipeline fixtures and parts for sites and projects carried out on their own.
- United Water Supply Company of Georgia LLCTbilisiFrist: 28. Apr.
Reconstruction of the Sanitary Sewer System of Kutaisi
Lot 1: KWWP Construction of Sewer System Phase 1/01: Construction of wastewater collection gravity lines with a length of 79.94 km and 3500 house connections; Lot 2: KWWP Construction of Sewer System Phase 1/02: Construction of wastewater collection gravity lines of 61.97 km and 6.67 km pressure lines, two pumping stations in the capacity of (1) Q=1.75 l/s, H=41m, and (2) Q=20l/s, H=47m, and 3300 house connections.
- Donegal County Council_1193LiffordFrist: 23. Apr.
The Procurement of an Engineering Service Provider for the Connection of 16 Group Water Schemes in Donegal to the Public Water Supply and Taking in Charge of Same
Donegal County Council wishes to appoint an Engineering Services Provider (ESP) using the standard conditions of engagement COE1 for the design of interconnector watermains for three lots comprising 16 private Group Water Schemes (GWS)s to the closest point on the Public Water Supply. These GWS are located across the county. The service is to include for all Civil and Hydraulic Design services as required; any environmental / ecological evaluations required; preparation of construction tender docs, administration of tender process (publication, clarifications, evaluation, etc.); award and management of construction contract. The ESP will also be required to act as PSDP for the Project.
- Mayo County Council_1127Castlebar
Supply of a new Fire Service water tanker for Mayo County Council Fire Service
This contract is for the Construction, supply and delivery of 1 number new Fire Service Water Tanker. Tenderers must associate themselves with this competition in order for them to access the tender documents, ask and receive queries and submit a tender response. All responses must be submitted in a ZIP FILE format.
- Bærum kommuneSANDVIKA
Hire and operation of water meters, equipment and cloud system for the Water and Sewage system - stage 1 qualification phase.
Bærum municipality, hereafter called the contracting authority, invites tenderers to a competition with negotiations for a contract for the hire, installation and operation of water meters and cloud services for water and sewage. A more detailed description is in SSA-L Annex 1 Requirement Specifications (technical description).
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 21. Juli 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Department of Project Implementation (DoPI), General Directorate of European Union and Foreign Relations (DGEUFR), Ministry of Environment, Urbanization and Climate Change (MoEUCC).
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.