Improvement of water and wastewater infrastructure in the Gorski Kotar Region, Croatia
LOT 1 - Rehabilitation of water supply pipelines in part of the settlement of Lokve – DIP settlement and construction of public sewer system of the settlement of Lokve – PART 1. The project includes the construction of sanitary sewers in part of the Lokve agglomeration (DIP settlement) in the length of 246.50 m', ...
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
LOT 1 - Rehabilitation of water supply pipelines in part of the settlement of Lokve – DIP settlement and construction of public sewer system of the settlement of Lokve – PART 1. The project includes the construction of sanitary sewers in part of the Lokve agglomeration (DIP settlement) in the length of 246.50 m', rehabilitation of...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: KD VODOVOD I KANALIZACIJA d. o. o.
- Veröffentlicht: 10. April 2026
- Frist: Nicht angegeben
- Thema: Leitungsbau
Ausschreibungsbeschreibung
LOT 1 - Rehabilitation of water supply pipelines in part of the settlement of Lokve – DIP settlement and construction of public sewer system of the settlement of Lokve – PART 1. The project includes the construction of sanitary sewers in part of the Lokve agglomeration (DIP settlement) in the length of 246.50 m', rehabilitation of part of the water supply system of Lokve (DIP settlement) in the length of 383.77 m', inspection of state, development of implementation designs, as-built surveys, reports on as-built state and supporting documents necessary for works performance and obtaining Use Permits;LOT 2 - Construction of the water supply system and public sewer system in the municipality of Ravna Gora (Cagar) and rehabilitation of a section of water pressure pipeline PS Šije – WT Kosa. The project includes the construction of the water supply pipeline in the length of 835.00 m' and construction of the public sewer system in the length of 722.18 m' in the settlement of Cagar, and rehabilitation of the water pressure pipeline PS Šije – WT Kosa in the length of 387.78 m', with the development of implementation designs, as-built survey, report on as-built state and supporting documents necessary for works performance and obtaining Use Permits;LOT 3 - Rehabilitation of transmission pipeline WT Sv. Ilija – WT Nadvučnik. The project includes the construction of a bypass, the replacement of 7,449 m, and the development of implementation designs, as-built surveys, reports on as-built state and supporting documents necessary for works performance and obtaining Use Permits.
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
Noch keine Datei gelistetÄhnliche Ausschreibungen
3- Water Services CorporationLuqaFrist: 24. März
WSC/T/008/2026 - WORKS – TENDER FOR THE CONSOLIDATION OF WASTEWATER AND POTABLE INFRASTRUCTURE IN VARIOUS ROADS IN ST. PAUL'S BAY IN AN ENVIRONMENTALLY FRIENDLY MANNER TO THE WATER SERVICES CORPORATION
The subject of this tender is the consolidation of water infrastructure in various areas within St Paul’s Bay. The works include the upgrading of the gravity and rising mains sewer collection systems, with the objective of increasing capacity and improving flow.
- Dublin City CouncilDublin
Dublin City Council is establishing a single-operator framework agreement for the supply and delivery of sub compact and compact sweepers, as well as winter maintenance vehicles (3 Lots)
Dublin City Council is establishing a single operator framework agreement for the supply and delivery of sub compact and compact sweepers, as well as winter maintenance vehicles, to meet current and emerging operational needs associated with cycle lane cleaning and winter road maintenance across the Council’s administrative area. The framework will operate for a period of four years from the date of award, with an indicative total value of €2.5 million (ex VAT) across all lots. The initial phase value is €800,000 in the first year, with options to extend or issue further allocations as funding becomes available. This value is provided strictly for indicative purposes and does not represent a commitment to purchase any specific quantity or to exhaust the full amount. Actual drawdown will depend on operational requirements, available funding and performance of the awarded suppliers. The tender is divided into three lots to reflect both operational needs and environmental priorities. Lot 1 covers diesel sub compact sweepers, with approximately up to four (4) units expected to be procured and provision for future expansion. Lot 2 covers electric compact sweepers, with between two (2) and six (6) units expected to be procured and provision for future expansion. Lot 3 covers diesel winter maintenance sub compact vehicles, with between two (2) and four (4) units expected to be procured and provision for future expansion. For Lot 1 and Lot 3, the maximum permitted vehicle width is 1100 mm, while for Lot 2 the maximum permitted width is 1200 mm. Vehicles proposed under Lot 3 must be capable of winter treatment functions such as salt spreading on narrow cycle lanes and restricted routes. They must also be adaptable to a brine system in the future, as the methodology for winter road treatment is currently under review. An adjustable salt spreading width, ideally ranging from 1.1 metres to 4 metres, is required. Contractual requirements include a minimum one year full warranty from the vehicle or sweeper manufacturer. The framework does not include the supply of non warranty spare parts or diagnostics. Tenderers must deliver the vehicles within 22 weeks from contract award, with up to two additional weeks allowed for on site operator training where required. All vehicles will have to be delivered to Dublin City Council’s North City Operations Depot (NCOD), St. Margaret’s Road, Ballymun, Dublin 11. Evaluation will include provisional scoring at the evaluation meeting, followed by an on-site trial and inspection of the highest-ranked tenderer to verify compliance. Scores may be adjusted if specifications are not met, and inspections will continue in rank order until complete. Once final evaluations are confirmed, letters will issue, and after the standstill period, the contract may be awarded. The inspection process is integral to the overall evaluation. A full list of technical and performance requirements is provided in Appendix A – Fitness for Purpose. For further information please refer to documentation available to download from www.etenders.gov.ie Resource ID xxxxxxx – Input when notice created . Please note that this project is subject to funding.
- Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH
10004174 - Engineering support for the development of up to three PtL pilot plants in up to three countries
The International Power-to-X Hub supports the transition to climate-neutral industries and economies by advancing sustainable Power-to-X solutions in sectors where direct electrification is not yet feasible, especially aviation, maritime transport and energy-intensive industries. The project is implemented by Deutsche Gesellschaft fuer Internationale Zusammenarbeit (GIZ) GmbH on behalf of the German Federal Ministry for the Environment, Climate Action, Nature Conservation and Nuclear Safety (BMUKN). It is financed through the International Climate Initiative as part of Germany"s hydrogen and Power-to-X policy framework. Power-to-X enables the production of fuels and chemical feedstocks from renewable electricity and sustainable carbon or nitrogen sources and therefore helps replace fossil-based inputs while supporting climate protection, industrial transformation and sustainable economic development. The subject of this tender is providing technical support for the development of up to three Power-to-Liquid pilot plants in up to three countries. The assignment provides up to three industrial partner companies with customised engineering documents and advisory services to advance PtL pilot plant projects to FEED/EPC tendering stage. The requested services cover the full project development pathway from concept definition and selection through comparative techno-economic feasibility assessment and conceptual engineering to advice on procurement and tender strategy and, where required, support for the preparation of functional FEED/EPC tender documents. The contract is structured into four work packages in two implementation steps. In Work Packages A and B, the contractor shall review existing concepts and documentation, consult each partner, refine or propose PtL plant concepts, advise on feedstock and utility sourcing, process technologies, offtake markets, regulation and certification, conduct kick-off meetings and site visits, and prepare Concept and Site Analysis Reports with comparative assessments and recommendations. The contractor shall also deliver partner trainings and prepare comparative techno-economic feasibility studies for up to two plant concepts per partner, including a book of assumptions, process simulation, technical descriptions, preliminary process flow diagrams, equipment sizing, interface definitions, certification compliance assessment, CAPEX and OPEX estimates, economic modelling, risk analysis and concept recommendations. Preliminary results shall be discussed with each partner in an interactive workshop to validate assumptions, review trade-offs and support concept selection. Subject to confirmation by the partner and GIZ, Work Package C covers FEL-2 conceptual engineering for the selected concept and a refined Class 4 AACE cost estimate. This includes advisory support on site development, permitting and certification, preparation of an integrated project execution plan, partner trainings on PtL process simulation and plant engineering, and an FEL-2 engineering package comprising Basis of Design specifications, process descriptions, drawings, equipment lists, preliminary equipment specifications, interface and battery limit definitions, input and output specifications, and QA/QC and HSE requirements. The engineering work shall be carried out in close coordination with the partner and GIZ and shall include advice on technology and licensor options as well as updated CAPEX estimates, economic models and key project indicators. Where sustainable CO2 supply is not readily available, the services may also include, for one project, the screening of potential sustainable carbon sources and the design of a CCU system including FEL-1 engineering package and CAPEX assessment. In a subsequent stage, the contractor shall advise on FEED/EPC procurement and tender strategy and, where required, prepare the functional tender specifications, including design basis, technical and performance specifications, scope of supply and services, site and utility information, HSE and QA/QC requirements and project schedule elements in line with the partner"s procurement framework and international standards. The contractor shall also provide advice on commercial and legal terms during tender preparation. For one partner, the services may further include support during the FEED/EPC tendering process, including bidder communication, clarification support, qualification and bid evaluation assistance, preparation of evaluation notes and support during negotiations. Throughout implementation, the contractor shall also provide cross-cutting knowledge exchange, monitoring, reporting, backstopping and coordination services.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist KD VODOVOD I KANALIZACIJA d. o. o..
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.