25-031F Framework Agreement for the Provision of Contact Centre Services
You must submit through the etenders system before the deadline. The submission deadline is strict and no submissions will be possible after the date and time specified in the PQQ documents. Please note that all tenders are electronic, as such NO paper copies will be accepted or read. Please submit via the etenders sys...
Angebotsfrist:07. Juni 2026
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
You must submit through the etenders system before the deadline. The submission deadline is strict and no submissions will be possible after the date and time specified in the PQQ documents. Please note that all tenders are electronic, as such NO paper copies will be accepted or read. Please submit via the etenders system not later tha...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: Uisce Éireann
- Veröffentlicht: 20. April 2026
- Frist: 07. Juni 2026
Ausschreibungsbeschreibung
You must submit through the etenders system before the deadline. The submission deadline is strict and no submissions will be possible after the date and time specified in the PQQ documents. Please note that all tenders are electronic, as such NO paper copies will be accepted or read. Please submit via the etenders system not later than 12:00 hrs local time Monday 8th June 2026 . The estimated values in this eForm are dependent on needs and budgetary resources, only indicative and are not binding on the Contracting Entity. If the estimated values are equal to or greater than EUR 250 million, any economic operators participating in this public procurement procedure shall notify the contracting entity of all foreign financial contributions as defined in Article 28(1), point (b) of Regulation (Eu) 2022/2560 on foreign subsidies distorting the internal market.
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
10- Uisce ÉireannDublinFrist: 08. Juni
25/031F Framework Agreement for the Provision of Contact Centre Services
The estimated value of the contract is inclusive of indexation of €18,462,429 ex. VAT over the maximum term of the framework agreement. Regulation 97(1)(a) of the European Union (Award of Contracts by Utility Undertakings) Regulations 2016 (SI 286/2016) (the Utilities Regulations 2016) will apply to any further uplifts required to take account of further inflation. You must submit through the etenders system before the deadline. The submission deadline is strict and no submissions will be possible after the date and time specified in the PQQ documents. Please note that all tenders are electronic, as such NO paper copies will be accepted or read. Please submit via the etenders system not later than 12:00 hrs local time Monday 8th June 2026 . The estimated values in this eForm are dependent on needs and budgetary resources, only indicative and are not binding on the Contracting Entity. If the estimated values are equal to or greater than EUR 250 million, any economic operators participating in this public procurement procedure shall notify the contracting entity of all foreign financial contributions as defined in Article 28(1), point (b) of Regulation (Eu) 2022/2560 on foreign subsidies distorting the internal market.
- Louth and Meath Education and Training Board 1384Navan
Multi Supplier Framework Agreement for the Supply and Delivery of Art Class Materials in 2 Lots Lot 1 General Art Class Materials Lot 2 Ceramics
Accelerated Procedure The tender relates to ID 5748345 Due to a discrepancy with the deadline time on the document and the etenders platform all submissions should be uploaded to this Call for Tender with a deadline of Wednesday 09th July 2025 12 noon The framework agreement for each Lot will be established on foot of this tender competition for: outlined in the Appendix 2 Pricing Schedule. • Lot 1 General Art Class Materials • Lot 2 Ceramics
- Norwegian Ministry of Foreign AffairsOslo
Framework agreement for the purchase of security products
The Ministry of Foreign Affairs is responsible for physically securing the foreign stations. The procurement shall cover the foreign stations ́needs for complete solutions for lock doors and expedition fields, as well as security doors (referred to as security products). The procurement shall ensure robust, standardised and reliable systems that safeguard both operation and safety requirements in the entrance and exit areas as well as zone divisions. Bulletproof sluices and expeditionary fields are used in the perimeter between public areas and offices. Emergency exits are to be secured with steel safety doors with fire classification. In addition the office premises are divided into security zones that are separated by solid security doors. In addition there can be a need to supplement and replace parts for the existing security products. The Ministry of Foreign Affairs intends to enter into a framework agreement for security products that cover this need. One framework agreement shall be signed with one tenderer. The framework agreement will be valid for 2 years, with an option for an extension for a further 1+1 year. The framework agreement will be non-exclusive. The procurement ́s value is estimated to NOK 6 million excluding VAT per annum, in addition there will be freight costs estimated to NOK 600,000 per annum. Emphasis is put on the fact that this is only an estimate based on previous years and it can vary depending on need. The maximum value of the framework agreement is NOK 35 million excluding VAT.
- St John of God Community Services clgStillorganFrist: 30. Apr.
Prior Information notice (PIN) as a call for competition for the provision of Personal Outcome Measures Training Services for Saint John of God Community Services clg
THIS IS A CALL FOR COMPETITION and the Contracting Authority is requesting interested suppliers to contact Procurement@sjog.ie no later than March 30, 2026 at 5pm. The Contracting Authority will request interested suppliers to complete a short Request for Information. The contract will be awarded based on a Request for Quotes (RFQ) process to suppliers that expressed interest by the PIN deadline. There will not be publication of a further call for competition.
- Oslo kommune v/ Byrådsavdeling for utdanningOslo
Framework agreement for the purchase of consumables
PURPOSE AND SCOPE Oslo municipality, c/o the Agency for Improvement and Development, department for procurement services, shall enter into a framework agreement for the purchase of consumables within product areas cleaning, drying and hygiene, kitchens and serving, as well as offices and schools. The procurement will be carried out on behalf of cooperating entities in addition to Oslo municipality. The joint procurement agreement has a total annual estimated value of NOK 180 million per annum for Oslo municipality and its cooperation partners, total NOK 720 million for the entire contract period. The contracting authority draws attention to the fact that the estimates are based on previous consumption. The estimates are only a guideline and are without obligation for the Contracting Authority. This framework agreement is valid for up to a maximum value of NOK 1,100 million for all involved entities.
- Københavns Lufthavne A/SKastrupFrist: 20. Apr.
Tender for lease agreements within the food & beverage segment in Copenhagen Airport
This tender concerns 6 individual lease agreements (lots) within the food and beverage segment in Copenhagen Airport. The lease agreements subjects are as follows: Lot No. 1: Nordic cafe, Lot No. 2: Coffee and bakery, Lot No. 3: Coffee & Sandwich, Lot No. 4: Coffee & Sandwich, Lot No. 5: Modern Asian restaurant and Lot No. 6: Coffee shop - To go. The tenderers may submit up to three separate tenders with different brands per lease agreement. The estimated contract values have been calculated on
- Lillestrøm KommuneLillestrømFrist: 11. Mai
Framework agreement for the procurement of fruit and vegetables
The aim of the framework agreement is to get an agreement that covers the municipality ́s need for fresh fruits and vegetables as well as prepared fruit and vegetables. Furthermore, the entities that depend on the deliveries of fruit and vegetables in their service production will be provided with the services they will at the right time. This requires that the correct products are delivered of good quality, at the right time and at the right place, as well as a good dialogue with the supplier.
- Department of DefenceNewbridgeFrist: 14. Mai
Aviation Advisory Services to support completion of Military Implementing Rules and associated Acceptable Means of Compliance and Guidance Material documents for Department of Defence
This is a Call for Tender in respect of Aviation Advisory Services. Please note that: • tenderers must associate themselves with this Competition in order to access the tender documents, ask and receive clarifications and submit a tender response. This can only be done via login. • all responses must be submitted in a zipped file format. • the Contracting Authority are not in a position to answer queries marked confidential “
- Gas Networks IrelandCorkFrist: 09. Apr.
25/064 - Qualification System for for the provision of Polyethylene (PE) Pipe, Fittings and Valves
The objective of this QSQ is to qualify Applicants onto the Qualifications System for the manufacturing and supply of Polyethylene (PE) Pipe, Fittings and Valves for Gas Networks Ireland. The proposed supply requirements are to be divided into four (4) separate lots as detailed below: • Lot 1 (PE Pipe 90mm - 400mm) – Manufacture and supply of PE pipe for gas. • Lot 2 (PE Pipe 20mm - 63mm) – Manufacture and supply of PE pipe for gas. • Lot 3 (PE Fittings) Manufacture and/or supply of PE Fittings for gas. These include but are not limited to PE; caps, couplings, elbows, equal tees, flange adaptors, reducers, tee branch saddles, tees, tapping tees, G clamp adaptors, multi tap tees, branch saddles, bends, unequal tees and end caps. • Lot 4 (PE ball valves) – Manufacture and/or supply of PE Valves for gas. These include but not limited to valves ranging in size from small diameter 20mm to larger diameters up to 315 mm. Please note: Lots 1 and 2 relate to manufacture and supply requirements. Lots 3 and 4 relate to manufacture and/or supply requirements. The requirements for the manufacture and/or supply of pipes, fittings and valves under this Qualification System will include arrangements for delivery to various stipulated depot destinations on the island of Ireland and the ability to operate a national distribution network. Applicants should note that from time to time over the term of the Qualification System, the Contracting Entity, at its sole discretion but without altering the overall nature of the Qualification System, may modify the Qualification System to reflect changes in its requirements. Such modifications may include changes to the pipe diameter and pressure rating which may result in an increase to the pipe size, wall thickness and pipe properties or specification and the provision of services or additional supplies associated with such changes. The Contracting Entity will also seek similar changes to pipe fittings and valves. The conditions under which such an option may be exercised by the Contracting Entity will be outlined in the relevant call off competition document. The Contracting Entity also reserves the right to add additional lots to the Qualification System. Applicants may apply for qualification in one or more lots. At the discretion of the Contracting Entity a full site visit and audit of the prospective Qualified applicants supply chain manufacturing facility(s) will be carried out to validate and support their pre-qualification submission. In the event of a site visit and audit being carried out to pre-qualify the Supplier must successfully pass this site inspection audit. It is envisaged that the scope of products and services of the initial Call for Competition to be drawn-down under the Qualification System will be, but not limited to; PE pipes, fittings and valves and will cover the following: 1. Standards: • Gas - as per I.S. EN 1555 or equivalent. 2. Indicative Diameter Range: • PE pipe, fittings and valves ranging in size from small diameter 20mm to large diameter 400 mm pipe and fittings. 3. Indicative Pipe Specification/Types: • Solid wall pipe; • Coextruded pipe; • Peelable pipe; and 4. Indicative Pressure Range and Pipe Materials : Pipe Material/Description Pressure Range (Barg) PE 100 (SDR 11) 7 PE 80 (SDR 11) 4 PE 100 (SDR 17) 4 PE 80 (SDR 17) 2 5. Colour • PE80: solid wall PE pipe in yellow colour • PE80: c-extruded wall PE pipe with outer layer in yellow colour • PE100: solid wall PE pipe in orange colour (sizes 180mm and above) • PE100: PE 100 PE pipe with peelable outer layer in yellow colour (with stripes) • Pipes for proof-of-concept hydrogen projects shall be yellow with blue axial stripes.
- Gewobag Wohnungsbau-Aktiengesellschaft BerlinFrist: 26. Mai
Provision of TAVI and Cardiac Procedures for HSE Mid West
The Health Service Executive hereby invites suitably qualified and experienced Service Providers to submit tenders for the Provision of TAVI and Cardiac Procedures for HSE Mid-West. These services are required on an ongoing basis. However, there is no guarantee of any definite level of business. The estimated value of the tender is €3.4 million over a possible five [5] year period. The HSE intends to appoint up to four service providers. Any Contract that results from this Competition shall be for an initial period of 24 months (the “Term”). The HSE reserves the right to extend the Term for three periods of up to 12 months each on the same terms and conditions, subject to the Contracting Authority’s obligations. The Contracting Authority does not make any guarantee in relation to the volume or value of Services to be procured over the Term. The HSE therefore reserves the right, after the award of contract, to negotiate with the successful tenderer the level of services to be provided to match the available budget. For full details, please see the clinical and service specification outlined in the Specification of Requirement below. Note: Service Providers are requested to only submit a tender if they are confident that they have the requisite capacity, suitably qualified staff, experience and expertise within their organisation to deliver on the service as outlined in the project documentation and commencing as soon as practicable after award of contract. All submissions will be reviewed for compliance with the specifications as outlined in this document. This tender is primarily for the HSE Mid West. Please note that up to five [5] additional drawdowns by other Regional Health Authorities (RHAs) within the HSE will be allowed under any contracts resulting from this tender competition. Such drawdowns will be similar in scope to the services required in this competition. In the event of such drawdowns, the successful tenderer for this competition will be required to deliver the services under the same terms and conditions resulting from this competition. The HSE does not make any guarantee in relation to the volume or value of such services that may be procured from any resulting contracts. This tender process is being conducted as an Annex XIV procedure utilising an open style tender, with all terms of the competition specified in the tender documents, under Part 3 Chapter 1 of the European Union (Award of Public Authority Contracts) Regulations 2016 (S.I. 284 of 2016) (the “Regulations”) - Social and other specific services. The required services are listed as Annex XIV services of Directive 2014/24/EU (the “Directive”) and, accordingly, only Regulations 74-77 of the Regulations apply. Tenderers should note that if the HSE identifies a requirement for additional supplies or services, it may exercise its rights under Article 32(3) and 32(5) of Directive 2014/24/EU.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 07. Juni 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Uisce Éireann.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.