1105601 UiO Life Sciences user equipment. K936.04.02 Micro-injection robot for zebrafish larvae
Statsbygg constructs the new Life Sciences Building (LVB) for the University of Oslo and Oslo University Hospital on behalf of the Ministry of Education and Research and South-East Health as the co-contracting authority. The building shall be the workplace for approx. 1,600 employees and 1,600 students. Start up for th...
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
Statsbygg constructs the new Life Sciences Building (LVB) for the University of Oslo and Oslo University Hospital on behalf of the Ministry of Education and Research and South-East Health as the co-contracting authority. The building shall be the workplace for approx. 1,600 employees and 1,600 students. Start up for the excavation and ...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: STATSBYGG
- Veröffentlicht: 27. April 2026
- Frist: Nicht angegeben
Ausschreibungsbeschreibung
Statsbygg constructs the new Life Sciences Building (LVB) for the University of Oslo and Oslo University Hospital on behalf of the Ministry of Education and Research and South-East Health as the co-contracting authority. The building shall be the workplace for approx. 1,600 employees and 1,600 students. Start up for the excavation and ground work was the second quarter of 2019 and the planned completion is at the end of 2026. Various professional environments shall work multi-disciplinary here to develop new solutions for major challenges within health and sustainability with access to the best and most modern equipment required to carry out world class research, teaching and innovation. The procurement will be made without a prior notice in accordance with PPR § 13-4 letter b no. 2, as the service that shall be procured in accordance with its nature and technical character can only be provided by one specific tenderer. The contracting authority intends to procure a fully automatic micro-injection system for zebrafish larvae (1-5 days post fertilisation) for use in biomedical research. The system shall enable precise and reproduciable injections of foreign substances in defined anatomic measurements in living zebrafish larvae, without a need for manual orientation or operator intervention during the actual injection process. The procurement is for the delivery of a commercially available, fully automatic micro-injection system, including hardware, software, training and the necessary additional equipment. The minimum requirements and functional needs Minimum requirements are determined on the basis of the contracting authority ́s documented research needs for high precision, reproducibility, throughput and reduced operator dependency. The system shall as a minimum offer: •Automatic recognition of zebrafish larvae (1-5 dpf) and anatomic injection targets using machine vision based software.•Fully automatic injection in defined anatomical structures in 2 dpf larvae, including duct of Cuvier, perivitelline space and hindbrain ventricle.•Fully automatic XYZ positioning, needle rotation, volume calibration and detection of penetration.•Fully automatic handling and injection of larvae placed in random orientation on the agarose plate, Without manual orientation.•Support for injection of different substance classes, including dyes, chemical compounds, bacteria and human cells.•Possibility for both automatic and semi-automatic/manual operation.•Integrated camera and touch screen requirements are functionally justified in research needs and are not designed with the intention of favouring specific suppliers or products. Based on set minimum requirements, completed market surveys and technical assessments, real or suitable alternative solutions to the Automated microinjection system for the zebrafish larvae from Life Science Methods in the market have not been identified that fulfil the requirements. It is not known other commercially available systems that together fulfil the stipulated functionality and performance requirements. It is, therefore, the contracting authority ́s assessment that the service, in its nature, can only be delivered by one supplier for technical reasons. The terms for the procurement without a prior notice in accordance with PPR § 13-4 letter b no. 2 are therefore deemed to be fulfilled. If questions are asked, please contact Alf Årdal by email: Alf.Petter.Aardal@statsbygg.no Deadline for objections is 10 days from the date of publication.
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
10- STATSBYGGOSLOFrist: 13. Mai
RFI - Market dialogue 1105601 UiO Life Science user equipment. K936.04.02 Automated Microinjection Robot for zebrafish eggs and larvae
Statsbygg constructs the new Life Sciences Building (LVB) for the University of Oslo and Oslo University Hospital on behalf of the Ministry of Education and Research and South-East Health as the co-contracting authority. The building shall be the workplace for approx. 1,600 employees and 1,600 students. Start up for the excavation and ground work was the second quarter of 2019 and the planned completion is at the end of 2026. Various professional environments shall work multi-disciplinary here to develop new solutions for major challenges within health and sustainability with access to the best and most modern equipment required to carry out world class research, teaching and innovation.
- STATSBYGGOSLO
1105601 UiO Life Sciences user equipment. K930.29.01 Sequentator
Statsbygg constructs the new Life Sciences Building (LVB) for the University of Oslo and Oslo University Hospital on behalf of the Ministry of Education and Research and South-East Health as the co-contracting authority. The building shall be the workplace for approx. 1,600 employees and 1,600 students. Start up for the excavation and ground work was the second quarter of 2019 and the planned completion is at the end of 2026. Various professional environments shall work multi-disciplinary here to develop new solutions for major challenges within health and sustainability with access to the best and most modern equipment required to carry out world class research, teaching and innovation. FOA § 13-4 letter b. no. 2: The procurement concerns services that only a specific supplier can deliver, for technical reasons, as well as § 13-4 letter b. no. 3. A compact and flexible sequencing instrument shall be procured for use at the Department of Medical Genetics at the University of Oslo, affiliated with NorSeq – the national research infrastructure for sequencing. The instrument shall be used for quality control (QC) of sequencing libraries, small scale genome sequencing and verification sequencing, as well as included in the service offer to researchers with a need for low to moderate data amounts. The instrument shall be able to sequence a broad range of species and applications, as well as function as a QC tool for genome-scale sequencing instruments. To fulfil this purpose, the following required minimum requirements are set for the instrument: Support for a wide range of genomic applications, including 2×500 bp paired-end sequencing with high data quality sequencing capacity up to 30 Gb per run, with flexible adaptation of data quantity Sequencing time of maximum 24 hours for 2×300 bp set-up Flexibility in cycle numbers (minimum 100, 300, 600 and 1000 cycles) Use of ready-produced reagent cassettes and reagents that can be handled and stored at room temperature Support for index-first sequencing and fast generation of index reads for quality control and optimisation of sample pooling Full compatibility with Illumina libraries, so that the instrument can be used as a QC platform for existing large scale sequencing systems Delivery of sequence data with a minimum of Q30 quality at relevant read lengths. The requirements are determined based on the contracting authority ́s actual need for efficient operation, high data quality, quick execution and seamless integration with the existing infrastructure and work flow. Market assessment and alternative solutions The Contracting Authority has carried out a market survey (RFI) via Mercell/Doffin. Only one tenderer registered interest and documented fulfilment of all the minimum requirements. Furthermore, the contracting authority has assessed alternative technologies and suppliers based on the professional environment ́s knowledge of the market. These alternatives do not, however, fulfil the requirement, i.a. because they:do not support 2×300 bp paired-end sequencing of equivalent quality has significantly longer sequencing time than 24 hours for equivalent set-ups not compatible with Illumina libraries and therefore cannot be used for quality control of existing systemsnot offer the necessary flexibility in data capacity up to 30 Gb per running that does not support 'index-first' sequencing or rapid generation of read indexsUse of such alternative solutions will lead to significant disadvantages, including reduced data quality, inefficient use of resources, increased time spent and a lack of integration with existing infrastructure. This is seen as disproportionately against the objective of the procurement. Conclusion: Based on the set requirements and completed market surveys, the contracting authority has no real or reasonable alternatives in the market than MiSeq i100 Plus from Illumina. This is as far as the contracting authority is aware of the only system that fulfils all functionality, performance and compatibility requirements. The terms in PPR § 13-4 letter b no. 2 and are therefore considered fulfilled. If questions are asked, please contact Alf Årdal by email: Alf.Petter.Aardal@statsbygg.no Deadline for objections is 10 days from the date of publication.
- STATSBYGGOSLOFrist: 03. Juni
1105601 UiO Life Sciences user equipment. K930.17 Bio reactors for fermentation
Statsbygg constructs the new Life Sciences Building (LVB) for the University of Oslo and Oslo University Hospital on behalf of the Ministry of Education and Research and South-East Health as the co-contracting authority. The building shall be the workplace for approx. 1,600 employees and 1,600 students. Start up for the excavation and ground work was the second quarter of 2019 and the planned completion is at the end of 2026. Various professional environments shall work multi-disciplinary here to develop new solutions for major challenges within health and sustainability with access to the best and most modern equipment required to carry out world class research, teaching and innovation.
- SETESDAL MILJØ & GJENVINNING IKSEvje
Procurement of a press for waste management
The contracting authority intends to enter into a contract for the procurement of a press with automatic binding for use in waste management. The press can be offered with or without feeding band, as the feed band is a voluntary option. The press shall as a minimum be able to be used for compressing and bundling paper, cardboard and plastic packaging. It is desirable that the offered press can also press hard plastic and agricultural plastic. Other fractions can also be relevant based on what the offered equipment is suitable for. The press shall have a minimum of 60 tonnes of press power. Tenderers must describe their assessments and state the reference facilities in their tender offer.
- Møre og Romsdal FylkeskommuneMOLDEFrist: 30. Apr.
Market dialogue for printers, multifunction machines, and sustainable printing services
The contracting authority for this competition is Møre og Romsdal county. The contracting authority would like to enter into agreements for the procurement of small printers with or without scanners and the hire of multi-function machines that can be adapted to changed needs over time. The contracting authority would like a sustainable service that reduces the impact on the environment where safety is prioritised.
- Oslo kommune v/ Renovasjons- og gjenvinningsetatenOsloFrist: 11. Mai
Procurement of consultancy services for the execution of waste analyses.
PURPOSE AND SCOPE The contracting authority shall enter into a framework agreement with a tenderer for consultancy services for planning, implementing and preparing a report for waste analyses. In accordance with the Waste Regulation chapter 10a, REG is obligated to ensure the sorting and material recovery of several waste types. In order to document the sorting requirements, as well as quality requirements and the necessary costs for the collection and waste management in the manufacturer responsibility schemes, it is decisive to have an overview of the composition of the waste in REG ́s different waste streams. There can also be a need for waste analyses or other surveys in order to increase knowledge on the composition of bulky waste, household like business waste or to measure the effect of campaigns etc. The agreement has an annual expected consumption of NOK 1.5 million. The contracting authority draws attention to the fact that the estimate is based on previous consumption and the expected future need. The framework agreement has a maximum value of NOK 12 million. The estimates are only a guideline and are without obligation for the Contracting Authority.
- NORCE Research ASBergenFrist: 30. Apr.
Intention notice - Equipment for measuring gas in water.
NORCE Research AS needs to procure specially adapted sensors and data loggers for use in research activities. The delivery shall be fully compatible with the existing NORCE software and fulfil technical requirements, i.a. connected to the communication protocol, register definitions, physical interface (plug, pinout, RS485), robustness, electricity consumption and voltage area.
- Sandnes kommuneSandnes
Framework agreement - Workwear for employees in the unit for education.
The contracting authority needs to procure a framework agreement for the procurement and delivery of work wear with a logo for the unit for education, more specifically employees in the municipality ́s nurseries, before-and-after-school care and 1st years. Tenderers shall offer a wide range of workwear for women and men in accordance with the contracting authority ́s needs in the contract period. It is important that the workwear is suitable for women and men, from small to very large sizes. For
- HelsedirektoratetOsloFrist: 11. Mai
Procurement of a management tool for code systems and terminology.
The aim of the process is to procure a user friendly, safe and secure Management tool to support the Norwegian Directorate of Health ́s responsibility for management, storage, presentation and development of code systems and terminology in use in the health and care sector. The management tool that shall be procured will replace the contracting authority ́s current management tool. Any future needs that require further development are wanted as an option. A contract shall be signed with one (1) tenderer. See the requirement specifications for further details on the procurement ́s purpose and extent.
- Oslo kommune v/ GravplassetatenOslo
Purchase of electric sitting grass mowers with a front mounted cutting aggregate.
The contract is for the procurement of 16 electric sitting grass mowers with a front mounted aggregate for the cemeteries in Oslo municipality, see Annex 1 the Contracting Authority ́s requirement specifications for further information. Please note that the estimate is only a guideline and is without obligation for the Contracting Authority. The number of mowers that will be procured will depend on whether the offered price is compatible with the Contracting Authority's budget. The contracting a
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist STATSBYGG.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.