Thin section lapping and polishing equipment and thin section/sample saw (call for tenders no. 2)
A bid is requested for one (1) thin section lapping and polishing equipment and/or for one (1) thin section/sample saw. Thin section lapping and polishing equipment: The thin section lapping and polishing equipment must be capable of producing polished thin sections, thin sections with surface glass, polished sections,...
Angebotsfrist:03. Juni 2026
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
A bid is requested for one (1) thin section lapping and polishing equipment and/or for one (1) thin section/sample saw. Thin section lapping and polishing equipment: The thin section lapping and polishing equipment must be capable of producing polished thin sections, thin sections with surface glass, polished sections, and glued sectio...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: Geologian tutkimuskeskus
- Veröffentlicht: 29. April 2026
- Frist: 03. Juni 2026
Ausschreibungsbeschreibung
A bid is requested for one (1) thin section lapping and polishing equipment and/or for one (1) thin section/sample saw. Thin section lapping and polishing equipment: The thin section lapping and polishing equipment must be capable of producing polished thin sections, thin sections with surface glass, polished sections, and glued sections made from crushed material. GTK usually uses hot plate and oven impregnating with Araldite and Petropoxy adhesives for the production of thin sections. GTK uses a mineral and polarization microscope and a micrometer to inspect the quality and thickness of the grains. GTK produces thin sections from soft rock (shale) to very hard rock types (granite), as well as glued sections from crushed stone. As a general rule, the rock types in Finland are hard. GTK has an external Pfeiffer HiScroll 46 vacuum pump for the use of thin section lapping and polishing equipment so the vacuum pump is not within the scope of this invitation to tender. The most produced sections at GTK are as follows: Polished thin section and section with surface glass, size 48 mm x 28 mm, other sizes are also possible Polished section, size varies, normally sample is round, and the size is 25 mm x 30 mm. Glued gravel section, size varies, normally sample is round, and the size is 25 mm x 30 mm. The thickness of the polished thin section must normally be 0.03 mm, uniform in thickness, and the minerals must have the correct optical color for identification. The surface of the polished thin section must be scratch-free. and/or Thin section/sample saw: Thin section/sample saw is used for sawing bulk rock samples for thin section production. The size of rock samples varies from few cm up to 20 cm in thickness. The saw must be capable of cutting samples with a diameter of at least 10 cm and thin sections sized up to 50 mm x 75 mm. GTK has an external Pfeiffer HiScroll 46 vacuum pump for the use of thin section/sample saw so the vacuum pump is not within the scope of this invitation to tender. Delivery terms & warranty for both devices: Delivery term: DDP Geological Survey of Finland, Thin section laboratory, Kuopio, Finland. Incoterms 2020. Delivery at the latest by October 30, 2026. At least a two-year warranty from the acceptance of the equipment.
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
10- Education Procurement Service (EPS)LimerickFrist: 25. Mai
LA3680C - UL - CFT for the Supply, Delivery and Installation of Electron Microscopy Lab Equipment (3 Lots) for University of Limerick (UL)
University of Limerick request the supply of a Lab equipment for sample preparation and imaging of a wide range of materials. The purpose of the instrument is to enable preparing a diverse range of challenging samples, as well as enabling surface analysis and structural characterisation of materials from various research disciplines. Lot 1: Environmental scanning electron microscopy. A versatile and advanced field emission scanning electron microscope with a) high resolution, b) capable of heating and cooling of sample c) supporting pressures from high vacuum(~10⁻⁴ Pa) to ESEM pressures (~2600 Pa) ideal for biological, polymeric, or porous materials prone to dehydration or outgassing under high vacuum. Lot 2: Broad ion-beam polishing system. Fully automated Argon broad ion-beam polishing system. It will streamline the sample preparation process with the goal of providing robust, and high-quality surface finishes, even on the most challenging samples. The supplied system must be compatible with the existing samples transfer infrastructure available in Bernal Institute. Lot 3: Gold Sputter. SEM sample prep instrument for sample coating with conductive metals e.g. Au of non-conducting samples for standard SEM or tabletop SEM imaging. Should be an economical desktop unit proposed simple to operate with rapid pump down times, fine grain coatings and negligible sample heating.
- Midt-Telemark kommuneBØ I TELEMARK
Procurement and leasing of PCs, thin clients, monitors, tablets and AV equipment with associated services for eight municipalities in Telemark.
The aim of the procurement is to enter into a framework agreement for the procurement and leasing of PCs, thin clients, monitors, tablets, AV equipment and the accompanying products and services for the participants in Telemark Innkjøpssamarbeid KO (eight municipalities).
- An Garda Síochána_1192DublinFrist: 11. Mai
T.028.2026 Request for Tenders for the provision of a Managed Service for the provision of Security Screening Equipment for An Garda Síochána
In summary, the Services comprise a fully managed service for the provision of security scanning equipment for special event locations nationwide for An Garda Síochána. The Contracting Authority is seeking proposals from suitably qualified service providers for the provision of a managed service to provide magnetometers and x-ray machines, and associated accessories, including the provision of transport, set up and take down of all equipment, and the provision of training for personnel in the use of the equipment.
- Trinity Comprehensive SchoolDublinFrist: 05. Mai
Cft Call for Tenders for the Supply,Delivery and Installation of PE Equipment to Trinity Comprehensive School,Ballymun Road Ballymun, Dublin
The Board of Management of Trinity Comprehensive School (the contracting Authority)invites tenders("Tenders") to this call for tenders(CFT) from economic operators ("Tenderers") for the supply of goods as described in this CFT.The goods are to required to be delivered and installed at Trinity Comprehensive School, Ballymun Dublin before end of August 2026.All goods must meet the specifications as outlined by the Department of Education
- Ballinrobe Community School_78654BallinrobeFrist: 11. Mai
CFT Call for Tenders for the Supply,Delivery and Installation of Tools and Equipment for Construction Studies,Engineering,Art and Music to Ballinrobe Community School Ballinrobe,Co Mayo
The Board of Management of Ballinrobe Community School (the contracting Authority)invites tenders("Tenders") to this call for tenders(CFT) from economic operators ("Tenderers") for the supply of goods as described in this CFT.The goods are to required to be delivered and installed at Ballinrobe Community School,Ballinrobe ,Co Mayo before end of August 2026.All goods must meet the specifications as outlined by the Department of Education
- Coláiste CholmcilleBallyshannonFrist: 29. Apr.
cFT Call for Tenders for the Supply,Delivery and Installation of Engineering Tools,Machines and Equipment to Colaiste Cholmcille Community School,Ballyshannon Co Donegal
The Board of Management of Colaiste Cholmcille Community School (the contracting Authority)invites tenders("Tenders") to this call for tenders(CFT) from economic operators ("Tenderers") for the supply of goods as described in this CFT.The goods are to required to be delivered and installed to Colaiste Cholmcille Community School,Ballyshannon co Donegal before end of July 2026.All goods must meet the specifications as outlined by the Department of Education
- SYKEHUSINNKJØP HFVADSØ
Scope system with rack and scope for Sykehuset i Vestfold HF
The procurement will be carried out as a direct procurement in accordance with the procurement regulations § 13-4 first section, letter b, no. 2. The equipment subject to procurement must be from Olympus Norway AS in order to function with the existing system from Olympus Norway AS. The competition is therefore "impossible for technical reasons" as this applies to equipment that only Olympus Norway AS can deliver. Delivery of the mentioned equipment from another supplier than Olympus Norway AS will mean that it is not possible to continue the existing system as mentioned above. This will require a complete replacement of the remaining system. Therefore there are no reasonable alternatives and the terms in accordance with § 13-4 first section letter b, no. 2 are fulfilled. The deadline for objections is 10 days from the tender notice.
- Fraunhofer-Gesellschaft - Einkauf B12
300mm fully automated high resolution in-line CD and overlay (IZM-133.1) - PR1191754-3460-P
1 piece: 300mm fully automated high resolution in-line CD and overlay (IZM-133.1) The following equipment specification defines the requirements for a fully automated metrology tool to measure overlay and critical dimension (CD) structures on 300 mm and 200 mm wafers, produced using laser direct imaging (LDI) and i-line lithography. This investment expands the metrology capability for automated measurement of smaller feature sizes. The tool is essential for non-destructive characterization of highly integrated, chiplet-based 2.5D/3D and quasi-monolithic package architectures with sub-micrometer feature sizes. The equipment is compatible with 3D wafer stacks exhibiting high warp/bow. Wafer substrates are silicon and/or glass, with thicknesses up to 2.5 mm. Before processing, wafers are delivered to the tool in front-opening unified pods (FOUPs), which the operator manually places on the respective load ports. The new tool must be able to perform the following sequence of steps fully automatically: - Load designated wafers from the FOUP(s) - Execute metrology tasks - Return wafers to their original positions in the FOUP(s) Recipe programming must support a sufficiently wide range of options and parameters to meet research and development (R&D) needs. It is required that the equipment continuously performs the intended functions without interruptions or failures, in accordance with all requirements specified in this document. Furthermore, the equipment must be supplied with all items described below that are necessary for it to deliver the intended functions and capabilities in compliance with all requirements set out in this document.
- St. Mark's Community SchoolDublinFrist: 18. Mai
Call for tenders for the Supply,Delivery and installation of Tools and Equipment for Art,Music,PE, Construction Studies and Engineering at St Mark's Community School Cookstown Road,,Tallaght,Dublin 24
The Board of Management of St Mark's Community school (the contracting Authority)invites tenders("Tenders") to this call for tenders(CFT) from economic operators ("Tenderers") for the supply of goods as described in this CFT.The goods are to required to be delivered and installed at St Mark's Community school,Tallaght, Dublin 24 before end of August 2026.All goods must meet the specifications as outlined by the Department of Education
- St. Patrick's Comprehensive SchoolShannonFrist: 06. Mai
CFT Call for Tender for the supply, delivery and installation of Engineering tools and equipment at St Patrick's Comprehensive School, Shannon,Co Clare
The Board of Management of St Patrick's Comprehensive School (the contracting Authority)invites tenders("Tenders") to this call for tenders(CFT) from economic operators ("Tenderers") for the supply of goods as described in this CFT.The goods are to required to be delivered and installed at St Patrick's Comprehensive School,Shannon,Co Clare before end of August 2026.All goods must meet the specifications as outlined by the Department of Education
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 03. Juni 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Geologian tutkimuskeskus.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.