Qualification system for grounding transformers
Lot 1 - NEB 10 kV / 350 A This lot covers a Grounding Transformer (NEB) with the following main characteristics: Vector group ZNyn5(d), cooling type ONAN, designed for short-term operation of 2 hours. The rated high-voltage level is 10.4 kV with a rated current of 350 A. The rated low-voltage level is 0.4 kV with a rat...
Angebotsfrist:30. Mai 2026
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
Lot 1 - NEB 10 kV / 350 A This lot covers a Grounding Transformer (NEB) with the following main characteristics: Vector group ZNyn5(d), cooling type ONAN, designed for short-term operation of 2 hours. The rated high-voltage level is 10.4 kV with a rated current of 350 A. The rated low-voltage level is 0.4 kV with a rated power of 400 k...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: EnBW Energie Baden-Württemberg AG
- Veröffentlicht: 29. April 2026
- Frist: 30. Mai 2026
Ausschreibungsbeschreibung
Lot 1 - NEB 10 kV / 350 A This lot covers a Grounding Transformer (NEB) with the following main characteristics: Vector group ZNyn5(d), cooling type ONAN, designed for short-term operation of 2 hours. The rated high-voltage level is 10.4 kV with a rated current of 350 A. The rated low-voltage level is 0.4 kV with a rated power of 400 kVA. The specified zero-sequence impedance is 3.5 Ω per phase. All applicable requirements shall comply with DIN IEC 60076.
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
5- Department of ContractsFloriana
CT3023/2025 Competitive Dialogue: Pre-Qualification Questionnaire (PQQ) For the Procurement of a Records Management System for the Malta Police Force
The scope of the project is to procure an off-the-shelf fully-featured Records Management System, aiming to; - provide the Force with the opportunity to eliminate silos, - digitize and streamline most of its business processes, - eliminate duplication of data entry, - shifts towards a paperless environment, - improves data quality and make information easily accessible. Besides the system itself, a Service Level Agreement and training to MPF officials are also part of the Contract.
- Bus Eireann/Irish BusDublinFrist: 31. Mai
Annual Readvertisement of Qualification System for the Purchase and or Leasing of Buses and Coaches for Bus Éireann/Irish Bus - (Annual Readvertisement Publication Number 2/8)
Bus Éireann intends to procure low emission coaches and schools buses, and where possible zero-emission coaches with low environmental impact in compliance with the latest EURO VI Regulation. The vehicles will comply, as appropriate, with the EPA’s guidelines on road transport vehicles and the European Communities (Clean and Energy Efficient Road Transport Vehicles) (Amendment) Regulations 2021. To be considered for inclusion on a Qualification Panel(s), applicants must complete the Pre-Qualification Questionnaire (PQQ) providing relevant details in relation to the criteria set out below for assessment. It is envisaged that this qualification system will be used to either purchase and or lease during the five-year term of the Qualification System. Economic operators apply once to qualify onto the panel by providing details of their financial and technical capacity against predefined published Selection Criteria within a PQQ. The Qualification Panel for the Purchase and or Lease of Buses and Coaches will be broken down in to sub categories called Lot 1 – Purchase of Buses and Coaches, and Lot 2 – Lease of Buses and Coaches. Economic operators can apply for the Lot(s) that best reflect their commercial operations. Economic operators must complete a PQQ for the Lot(s) that they wish to qualify to. Only economic operators who satisfy the selection criteria of each individual Lot will qualify on to that Lot. After the initial advertisement, the panel must be advertised annually for the duration of the panel (5 years) to continually inform the market place of its existence. Economic Operators can apply to qualify on to the panel, throughout the duration of the panel. Economic Operators who are already qualified to the panel can also amend their application at any interval should their financial or technical capacity or capability change. Qualifying onto a panel does not guarantee any work and/or contracts to a supplier. There is no obligation to use the Qualification Panel and contracts can be advertised on an individual basis using the Negotiated Procedure. (Annual Republication Number 2/8)
- Gas Networks IrelandCorkFrist: 09. Apr.
25/064 - Qualification System for for the provision of Polyethylene (PE) Pipe, Fittings and Valves
The objective of this QSQ is to qualify Applicants onto the Qualifications System for the manufacturing and supply of Polyethylene (PE) Pipe, Fittings and Valves for Gas Networks Ireland. The proposed supply requirements are to be divided into four (4) separate lots as detailed below: • Lot 1 (PE Pipe 90mm - 400mm) – Manufacture and supply of PE pipe for gas. • Lot 2 (PE Pipe 20mm - 63mm) – Manufacture and supply of PE pipe for gas. • Lot 3 (PE Fittings) Manufacture and/or supply of PE Fittings for gas. These include but are not limited to PE; caps, couplings, elbows, equal tees, flange adaptors, reducers, tee branch saddles, tees, tapping tees, G clamp adaptors, multi tap tees, branch saddles, bends, unequal tees and end caps. • Lot 4 (PE ball valves) – Manufacture and/or supply of PE Valves for gas. These include but not limited to valves ranging in size from small diameter 20mm to larger diameters up to 315 mm. Please note: Lots 1 and 2 relate to manufacture and supply requirements. Lots 3 and 4 relate to manufacture and/or supply requirements. The requirements for the manufacture and/or supply of pipes, fittings and valves under this Qualification System will include arrangements for delivery to various stipulated depot destinations on the island of Ireland and the ability to operate a national distribution network. Applicants should note that from time to time over the term of the Qualification System, the Contracting Entity, at its sole discretion but without altering the overall nature of the Qualification System, may modify the Qualification System to reflect changes in its requirements. Such modifications may include changes to the pipe diameter and pressure rating which may result in an increase to the pipe size, wall thickness and pipe properties or specification and the provision of services or additional supplies associated with such changes. The Contracting Entity will also seek similar changes to pipe fittings and valves. The conditions under which such an option may be exercised by the Contracting Entity will be outlined in the relevant call off competition document. The Contracting Entity also reserves the right to add additional lots to the Qualification System. Applicants may apply for qualification in one or more lots. At the discretion of the Contracting Entity a full site visit and audit of the prospective Qualified applicants supply chain manufacturing facility(s) will be carried out to validate and support their pre-qualification submission. In the event of a site visit and audit being carried out to pre-qualify the Supplier must successfully pass this site inspection audit. It is envisaged that the scope of products and services of the initial Call for Competition to be drawn-down under the Qualification System will be, but not limited to; PE pipes, fittings and valves and will cover the following: 1. Standards: • Gas - as per I.S. EN 1555 or equivalent. 2. Indicative Diameter Range: • PE pipe, fittings and valves ranging in size from small diameter 20mm to large diameter 400 mm pipe and fittings. 3. Indicative Pipe Specification/Types: • Solid wall pipe; • Coextruded pipe; • Peelable pipe; and 4. Indicative Pressure Range and Pipe Materials : Pipe Material/Description Pressure Range (Barg) PE 100 (SDR 11) 7 PE 80 (SDR 11) 4 PE 100 (SDR 17) 4 PE 80 (SDR 17) 2 5. Colour • PE80: solid wall PE pipe in yellow colour • PE80: c-extruded wall PE pipe with outer layer in yellow colour • PE100: solid wall PE pipe in orange colour (sizes 180mm and above) • PE100: PE 100 PE pipe with peelable outer layer in yellow colour (with stripes) • Pipes for proof-of-concept hydrogen projects shall be yellow with blue axial stripes.
- FAIR - Facility for Antiproton and Ion Research in Europe GmbHFrist: 19. Mai
Racks for SFRS and NUSTAR
The required 19"-racks will be used for the installation of different computer and measurement technologies such as data acquisition systems, motor drives, measurement and diagnostic devices, PLC, and computer systems along the beamline of the Super-FRS (Superconducting Fragment Separator) which is part of the particle accelerator facility FAIR (Facility for Antiproton and Ion Research) being under construction in Darmstadt, Germany. Since the 19"-racks will be located next or in nearby niches to the beamline, an easy accessibility and a modifiability are required due to a higher radiation level environment. Each 19"-rack will serve as a standardized enclosure for various 19"-rack mountable electronic systems such as VME-, µTCA-, NIM-, and high voltage-crates and -modules. Due to the requirements to space and applications five types of basic racks are defined of different measures which need to be equipped with general and optional features to comply with the requirements at the different locations at the Super-FRS at FAIR.
- FAIR - Facility for Antiproton and Ion Research in Europe GmbH
Racks for SFRS and NUSTAR
The required 19"-racks will be used for the installation of different computer and measurement technologies such as data acquisition systems, motor drives, measurement and diagnostic devices, PLC, and computer systems along the beamline of the Super-FRS (Superconducting Fragment Separator) which is part of the particle accelerator facility FAIR (Facility for Antiproton and Ion Research) being under construction in Darmstadt, Germany. Since the 19"-racks will be located next or in nearby niches to the beamline, an easy accessibility and a modifiability are required due to a higher radiation level environment. Each 19"-rack will serve as a standardized enclosure for various 19"-rack mountable electronic systems such as VME-, µTCA-, NIM-, and high voltage-crates and -modules. Due to the requirements to space and applications five types of basic racks are defined of different measures which need to be equipped with general and optional features to comply with the requirements at the different locations at the Super-FRS at FAIR.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 30. Mai 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist EnBW Energie Baden-Württemberg AG.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.