Provision of Sanitary ware and floor and wall tiles for all EUAA premises in Malta. Lot 1: Provision of sanitary ware for the EUAA premises in Malta Lot 2: Provision of floor and wall tiles for the EUAA premises in Malta
The objective of this call for tenders is to provide sanitary ware and delivery and installation of floors and wall tiles and relevant maintenance works, including any necessary repairs, which may be required at any of the EUAA premises in Malta. The procedure is divided into 2 lots.
Angebotsfrist:08. Juni 2026
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
The objective of this call for tenders is to provide sanitary ware and delivery and installation of floors and wall tiles and relevant maintenance works, including any necessary repairs, which may be required at any of the EUAA premises in Malta. The procedure is divided into 2 lots.
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: European Union Agency for Asylum
- Veröffentlicht: 03. Mai 2026
- Frist: 08. Juni 2026
- Thema: Baustoffe
Ausschreibungsbeschreibung
The objective of this call for tenders is to provide sanitary ware and delivery and installation of floors and wall tiles and relevant maintenance works, including any necessary repairs, which may be required at any of the EUAA premises in Malta. The procedure is divided into 2 lots.
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
10- European Union Agency for AsylumVallettaFrist: 15. Juni
Provision of General Maintenance at EUAA Premises in Italy (Buildings and containers). Lot 1 in Northern and Central Italy. Lot 2 - South of Italy
Provision of General Maintenance at EUAA Premises in Italy (Buildings and containers). The procedure is launched in lots: Lot 1 - Provision of General Maintenance at EUAA Premises in Northern and Central Italy Lot 2 - Provision of General Maintenance at EUAA Premises in the South of Italy The objective of this tender is to conclude two single framework contracts, one for Lot 1 and one for Lot 2, for the provision of preventive, corrective and emergency maintenance services covering core mechanical and electrical systems, as well as building fabric, at EUAA premises in Italy. The services aim to prevent downtime, ensure operational continuity, and maintain a safe and suitable working environment for users of the office buildings and modular units (containers).
- European Union Agency for Cybersecurity (ENISA)Athens
Supporting ENISA for the provision of cybersecurity services to Bulgaria, Malta, Netherlands and Poland LOTS 1-4
The purpose of this Call for Tenders is to provide support to ENISA in the implementation of • the Cybersecurity Support Action Programme and specifically to increase support for preparedness (ex-ante) and response (ex-post) cybersecurity services in the EU Member States. • the EU Cybersecurity Reserve and specifically in the delivery of response (ex-post) cybersecurity services for Member States.
- European Union Agency for Cybersecurity (ENISA)Athens
Supporting ENISA for the provision of cybersecurity services to Bulgaria, Malta, Netherlands and Poland LOTS 1-4
The purpose of this Call for Tenders is to provide support to ENISA in the implementation of • the Cybersecurity Support Action Programme and specifically to increase support for preparedness (ex-ante) and response (ex-post) cybersecurity services in the EU Member States. • the EU Cybersecurity Reserve and specifically in the delivery of response (ex-post) cybersecurity services for Member States.
- Transport Infrastructure Ireland (TII)DublinFrist: 01. Mai
Prior Information Notice for the Provision of Minor Works Framework for MetroLink
This notice serves as a Prior Information Notice (PIN) and is not a call for competition. A call for competition may be issued in Q3 2026. Transport Infrastructure Ireland (TII) is planning to invite submissions from companies and organisations possessing the necessary expertise and capacity to deliver Minor Works for Transport Infrastructure Ireland. This process represents a preliminary step toward the potential initiation of a formal tendering procedure, with the aim of establishing a Multi‑Supplier Framework Agreement for Minor Works. The anticipated scope of the Framework may include the supply and installation of associated materials and delivery of general minor building, repair, maintenance, upgrade works and various mitigation related works. These may encompass activities such as building fabric repairs, carpentry and joinery, painting and making‑good, minor structural repairs, insulation improvements, electrical and plumbing works, accessibility upgrades; temporary works design (by the Contractor where required) to support the safe execution of the works; supply and installation of branded hoarding and signage (subject to TII branding requirements to be specified in any future documentation); supply and installation of temporary or permanent fencing and netting, noise barriers with acoustic properties, replacement glazing, glazing upgrades, whole window replacements including frames and minor external works including remediations to boundary walls, fences, railing and hard landscape activities. Full details will be provided in any future call‑for‑competition documentation. It should be noted that this notice does not signify a commitment to procurement. Any specific procurements stemming from this notice will be duly advertised in accordance with applicable public procurement rules. Transport Infrastructure Ireland does not require a response to this Prior Information Notice. In advance of any potential competitive procurement process, TII is intending to conduct a market sounding exercise. TII would like to invite the market to complete an initial Market Sounding Questionnaire (MSQ) which will be used to seek insights and feedback from the market with experience or interest in the potential opportunity. This engagement is purely exploratory to inform the proposed procurement approach and not does not form part of a formal procurement process. For further information on the MSQ, please direct Expressions of Interest to supplychainmetrolink@tii.ie with the subject heading “Minor Works MSQ”. The deadline for submitting MSQ responses is 17:00 GMT on the 16th of April 2026.
- European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEsBrusselsFrist: 07. Apr.
Renewal of electronic and surveillance systems in the EU House in Vienna
Renewal of the entire security installation systems - video surveillance, access and alarm systems - in the EU-House in Vienna. The European Commission, acting also on behalf of the European Parliament Liaison Office in the EU House in Vienna, is launching a restricted call for tender for the renewal of the entire security system on its premises. The overall objective of the project is the installation of a new security system that guarantees the smooth and safe running of the EU House and which also provides a safe environment for employees and visitors. During the second step of this restricted procedure, a site visit is envisaged.
- Gas Networks IrelandCorkFrist: 09. Apr.
25/064 - Qualification System for for the provision of Polyethylene (PE) Pipe, Fittings and Valves
The objective of this QSQ is to qualify Applicants onto the Qualifications System for the manufacturing and supply of Polyethylene (PE) Pipe, Fittings and Valves for Gas Networks Ireland. The proposed supply requirements are to be divided into four (4) separate lots as detailed below: • Lot 1 (PE Pipe 90mm - 400mm) – Manufacture and supply of PE pipe for gas. • Lot 2 (PE Pipe 20mm - 63mm) – Manufacture and supply of PE pipe for gas. • Lot 3 (PE Fittings) Manufacture and/or supply of PE Fittings for gas. These include but are not limited to PE; caps, couplings, elbows, equal tees, flange adaptors, reducers, tee branch saddles, tees, tapping tees, G clamp adaptors, multi tap tees, branch saddles, bends, unequal tees and end caps. • Lot 4 (PE ball valves) – Manufacture and/or supply of PE Valves for gas. These include but not limited to valves ranging in size from small diameter 20mm to larger diameters up to 315 mm. Please note: Lots 1 and 2 relate to manufacture and supply requirements. Lots 3 and 4 relate to manufacture and/or supply requirements. The requirements for the manufacture and/or supply of pipes, fittings and valves under this Qualification System will include arrangements for delivery to various stipulated depot destinations on the island of Ireland and the ability to operate a national distribution network. Applicants should note that from time to time over the term of the Qualification System, the Contracting Entity, at its sole discretion but without altering the overall nature of the Qualification System, may modify the Qualification System to reflect changes in its requirements. Such modifications may include changes to the pipe diameter and pressure rating which may result in an increase to the pipe size, wall thickness and pipe properties or specification and the provision of services or additional supplies associated with such changes. The Contracting Entity will also seek similar changes to pipe fittings and valves. The conditions under which such an option may be exercised by the Contracting Entity will be outlined in the relevant call off competition document. The Contracting Entity also reserves the right to add additional lots to the Qualification System. Applicants may apply for qualification in one or more lots. At the discretion of the Contracting Entity a full site visit and audit of the prospective Qualified applicants supply chain manufacturing facility(s) will be carried out to validate and support their pre-qualification submission. In the event of a site visit and audit being carried out to pre-qualify the Supplier must successfully pass this site inspection audit. It is envisaged that the scope of products and services of the initial Call for Competition to be drawn-down under the Qualification System will be, but not limited to; PE pipes, fittings and valves and will cover the following: 1. Standards: • Gas - as per I.S. EN 1555 or equivalent. 2. Indicative Diameter Range: • PE pipe, fittings and valves ranging in size from small diameter 20mm to large diameter 400 mm pipe and fittings. 3. Indicative Pipe Specification/Types: • Solid wall pipe; • Coextruded pipe; • Peelable pipe; and 4. Indicative Pressure Range and Pipe Materials : Pipe Material/Description Pressure Range (Barg) PE 100 (SDR 11) 7 PE 80 (SDR 11) 4 PE 100 (SDR 17) 4 PE 80 (SDR 17) 2 5. Colour • PE80: solid wall PE pipe in yellow colour • PE80: c-extruded wall PE pipe with outer layer in yellow colour • PE100: solid wall PE pipe in orange colour (sizes 180mm and above) • PE100: PE 100 PE pipe with peelable outer layer in yellow colour (with stripes) • Pipes for proof-of-concept hydrogen projects shall be yellow with blue axial stripes.
- National Paediatric Hospital Development BoardDublin
HSE DPS National Mini-Competition for the Provision of Surgical Theatre and Ophthalmic Instrument Sets, initial requirements for the New Children’s Hospital (nch), Dublin 8
Mini-competition for all appointed Suppliers at the time of publish. The initial requirement is to purchase Surgical Theatre and Ophthalmic Instrument Sets for Paediatric Surgical Services at the new children’s hospital which is currently under construction at the St. James Hospital campus. For this tender process the HSE is the Contracting Authority for the Equipment and the initial requirements for the new children’s hospital will be drawn down by the National Paediatric Hospital Development Board (NPHDB*). Tenderers may tender for each of the full sets and quantities required in each of the Lots specified. However, Tenderers should only submit responses for Lots where they can meet the full requirements of the sets and quantities specified. It is accepted that Tenderers may need to collaborate with multiple manufacturers to fulfil the requirements within each Lot.
- Sectoral Procurement DirectorateFlorianaFrist: 25. Mai
SPD2/2026/003 TENDER FOR THE PROVISION OF VARIOUS BALLISTIC AND PROTECTIVE EQUIPMENT TO THE MALTA POLICE FORCE
The subject of this tender is for the provision of various ballistic and protective equipment to the Malta Police Force divided in sixteen lots as follows. Lot 1: Over Vests Level IIIA Lot 2: Under Vests Level IIIA Lot 3: Ballistic Plates Lot 4: Ballistic Plates Lot 5: Ballistic Plates stand-alone Level IV Lot 6: Ballistic Side Plate Inserts stand-alone Level IV Lot 7: Ballistic Helmet Level IIIA Lot 8: Ballistic Helmet VPAM HVN 2009 Level 3 Lot 9: Communication Headset Lot 10: Plate carrier systems Lot 11: Two hundred (200) Plate Carriers Lot 12: Fifty (50) Plate Carriers Lot 13: Ballistic Shields Level III Lot 14: Ballistic Shields Lot 15: Ballistic Shields Lot 16: Ballistic Shields
- European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEsBrusselsFrist: 03. Juni
Maintenance of scientific laboratory equipment in 3 lots (Perkin Elmer Instruments, Agilent Instruments and Applied Biosystems Instruments)
JRC-Ispra scientific laboratories need to conclude a framework contract for the maintenance services of chemical and biological laboratory instruments. The procedure is divided into 3 lots: Lot 1: Maintenance services for Perkin Elmer Scientific Instruments; Lot 2: Maintenance services for Agilent Scientific Instruments; Lot 3: Maintenance services for Applied Biosystems (Life Technologies) Instruments. The uninterrupted, reliable operation of such scientific instrumentation is a fundamental prerequisite for delivering high quality research outputs and policy‑relevant evidence. At present, three distinct framework contracts govern the preventive and corrective maintenance of three corresponding classes of instruments present in several scientific units of the JRC-Ispra, and all of these contracts are set to expire at the end of 2026, creating an imminent risk of service interruption and a fragmented environment. The maintenance subject of this call for tenders will provide for continuity of service.
- Louth and Meath Education and Training Board 1384Navan
Multi Supplier Framework Agreement for the Supply and Delivery of Art Class Materials in 2 Lots Lot 1 General Art Class Materials Lot 2 Ceramics
Accelerated Procedure The tender relates to ID 5748345 Due to a discrepancy with the deadline time on the document and the etenders platform all submissions should be uploaded to this Call for Tender with a deadline of Wednesday 09th July 2025 12 noon The framework agreement for each Lot will be established on foot of this tender competition for: outlined in the Appendix 2 Pricing Schedule. • Lot 1 General Art Class Materials • Lot 2 Ceramics
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 08. Juni 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist European Union Agency for Asylum.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.