Manufacture of Pressurizer Safety Valves, ASME Section III, Class 1 (Commodity Code PV62) for Poland AP1000® Project
Westinghouse sucht qualifizierte Lieferanten für sicherheitsrelevante AP1000-Ventile. Der Leistungsumfang umfasst Fertigung, Materialbeschaffung, Montage, Dokumentation, Prüfung, Werksabnahme, Verpackung sowie Qualitätssicherung gemäß ASME B&PV Code Section III. Voraussetzungen: NQA-1 und 10CFR50 Appendix B Konformität...
Angebotsfrist:25. März 2026(abgelaufen)
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
Westinghouse sucht qualifizierte Lieferanten für sicherheitsrelevante AP1000-Ventile. Der Leistungsumfang umfasst Fertigung, Materialbeschaffung, Montage, Dokumentation, Prüfung, Werksabnahme, Verpackung sowie Qualitätssicherung gemäß ASME B&PV Code Section III. Voraussetzungen: NQA-1 und 10CFR50 Appendix B Konformität, Auditierung dur...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: Westinghouse Electric Poland Sp.z.o.o
- Veröffentlicht: 04. März 2026
- Frist: 25. März 2026
- Thema: Armaturen
Ausschreibungsbeschreibung
Westinghouse sucht qualifizierte Lieferanten für sicherheitsrelevante AP1000-Ventile. Der Leistungsumfang umfasst Fertigung, Materialbeschaffung, Montage, Dokumentation, Prüfung, Werksabnahme, Verpackung sowie Qualitätssicherung gemäß ASME B&PV Code Section III. Voraussetzungen: NQA-1 und 10CFR50 Appendix B Konformität, Auditierung durch Westinghouse/NIAC, finanzielle Solvenz und Nachweis der Fachkompetenz. Interessenten müssen einen Qualifizierungsfragebogen anfordern, ausfüllen und eine Geheimhaltungsvereinbarung (PIA) unterzeichnen.
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Ausschreibungen
5- Westinghouse Electric Poland Sp.z.o.oKrakówFrist: 25. März
Manufacture of Safety Related Butterfly Valves (Commodity Code PV11) for Poland AP1000® Project
Westinghouse sucht qualifizierte Lieferanten für die Fertigung, Montage, Dokumentation, Prüfung und Qualitätskontrolle von AP1000 sicherheitsrelevanten Ventilen gemäß ASME B&PV Code, Section III. Interessenten müssen sich per E-Mail/Telefon melden, einen Qualifikationsfragebogen anfordern und ausfüllen. Kriterien: Erfahrung, NQA-1/10CFR50-konformes Qualitätsprogramm, regulatorische Konformität, finanzielle Stabilität. Nach Evaluation entscheidet Westinghouse über die Qualifikation. Qualifizierte Lieferanten müssen eine Geheimhaltungsvereinbarung (PIA) unterzeichnen und werden zur Angebotsabgabe eingeladen.
- Westinghouse Electric Poland Sp.z.o.oKrakówFrist: 25. März
Manufacture of Instrumentation Valves, ASME Boiler and Pressure Vessel Code, Section III, Class 2 and 3, (Commodity Code PV17) for Poland AP1000® Project
Westinghouse sucht qualifizierte Lieferanten für die Fertigung, Montage, Dokumentation, Prüfung und Qualitätskontrolle von Instrumentenventilen für AP1000-Sicherheitsanlagen (ASME B&PV Code, Section III, Class 2 und 3). Interessenten müssen sich per E-Mail/Telefon melden, einen Qualifikationsfragebogen anfordern und ausfüllen. Kriterien: Erfahrung mit ähnlichen Aufträgen, NQA-1-konformes Qualitätsprogramm, finanzielle Stabilität, Zertifizierung. Die Einreichung garantiert keine Qualifikation. Qualifizierte Lieferanten müssen eine Geheimhaltungsvereinbarung (PIA) unterzeichnen.
- Westinghouse Electric Poland Sp.z.o.oKrakówFrist: 25. März
Manufacture of 2” and Smaller Manually Operated Globe and Check Valves (Commodity Code PV02) for Poland AP1000® Project
Westinghouse sucht qualifizierte Lieferanten für die Fertigung, Montage, Dokumentation, Prüfung und Qualitätskontrolle von manuell betätigten Absperr- und Rückschlagventilen (Globe- und Check-Ventilen) für AP1000-Sicherheitsanlagen (Nennweite ≤ 2 Zoll). Anbieter müssen Interesse bekunden, einen Qualifikationsfragebogen anfordern und ausfüllen. Kriterien: Erfahrung mit ähnlichen Aufträgen, Nukleares Qualitätsprogramm (NQA-1, 10CFR50 App. B), gesetzliche Konformität, finanzielle Stärke. Nach Prüfung entscheidet Westinghouse über die Qualifikation. Qualifizierte Lieferanten müssen eine Geheimhaltungsvereinbarung (PIA) unterzeichnen.
- Westinghouse Electric Poland Sp.z.o.oKrakówFrist: 30. Apr.
Manufacture of Safety Related 3” and Larger Manually Operated Gate, Stop Check, and Check Valves, ASME Boiler and Pressure Vessel Code, Section III, Class 1, 2, and 3 (Commodity Code PV03) for Poland AP1000® Project
1. Experienced suppliers capable of fabrication, procurement of materials, assembly, documentation, inspection, factory acceptance testing, packaging, quality assurance/quality controls, special tooling, QME-1 and IEEE testing, and fulfillment of all responsibilities defined in ASME B&PV Code, Section III for the NPT Certificate Holder for AP1000 Safety Related PV03, 3” and Larger Manually Operated Gate, Stop Check, and Check Valves, ASME Boiler and Pressure Vessel Code, Section III, Class 1, 2, and 3 (described below), must (i) contact (email and/or phone call) the Westinghouse contact person identified in section 1 to express interest and request an AP1000 supplier qualification questionnaire, and (ii) upon receipt, complete the AP1000 supplier qualification questionnaire with sufficient detail for Westinghouse evaluation and return it via email to the Westinghouse contact person. 2. The qualification criteria shall include but is not necessarily limited to (i) demonstrated experience in furnishing similar scopes; (ii) meeting the quality requirements for such equipment in a nuclear power plant, including having a Westinghouse or NIAC audited nuclear quality program complying with NQA-1 and 10CFR50 Appendix B; (iii) certification of compliance with all applicable governmental policies, requirements, laws and regulations, applicable international treaties or agreements, and other regulatory requirements; (iv) financial standing (solvency) and (v) verification of capabilities as further described in the AP1000 supplier qualification questionnaire. 3. Upon evaluation of your response to the AP1000 supplier qualification questionnaire, Westinghouse will determine if your company meets or does not meet the qualification requirements. Submission of the AP1000 supplier qualification questionnaire does not automatically qualify your company to be supplier for the project. 4. Each qualified Supplier will be required to execute a Proprietary Information Agreement (PIA). Companies meeting the qualification criteria and who have executed the PIA will be invited to submit a proposal. 5. The Request for Proposal (RFP) document will be for a three (3) unit project. 6. The scope of work for the subject RFP will include: • Overall project management, planning, scheduling, and reporting. • Procurement of material. • Material receipt • Preparation of necessary manufacturing drawings and procedures (welding, cleaning, marking, coating, packaging, etc.), work packages (travelers), internal manufacturing and assembly procedures, quality and inspection plan(s), factory acceptance testing procedure, quality documentation packages, personnel and process qualifications, and handling/storage instructions. • Non-Destructive Examination (NDE) and other Testing and Qualification requirements as required by Design Specification. 7. The RFP document will require furnishing of a Parent Company Guarantee if the prequalified Supplier is an affiliate of Parent Company. 8. Proposal may be requested in EURO, PLN (Polish Zloty), and/or USD. Furthermore, the proposals may be requested in a combination of Fixed Price (not subject to any price adjustment) and Firm Price (subject to adjustment per mutually agreed upon indices). 9. The final supplier evaluation and selection criteria will include price, compliance with technical, quality, and commercial requirements, experience in furnishing similar equipment, past performance, and compliance with the terms and conditions of purchase. 10. Any companies that do not meet mandatory compliance requirements in section 3 will be excluded. 11. The procedure for companies to gain access to proprietary information, if required, will be subject to compliance with the executed PIA/NDA, Applicable Export Laws, Applicable Laws, and Applicable Safeguards Laws which will be included in the RFP document. 12. If a large number of companies express interest and submit a completed AP1000 Supplier Questionnaire, the Contracting Authority reserves the right to conduct a preliminary down-selection of companies that demonstrate the highest qualification, capacity, and capability to perform the required scope of work. 13. The Contracting Authority also reserves the right to exclude any of the following from this Competitive Bidding process: A. any economic operator that is directly or indirectly owned or controlled by an entity from a country not covered by the Government Procurement Agreement ("GPA") with the EU; or B. economic operators who rely in the Competitive bidding process on capacities of any entities from countries not covered by the GPA with the EU. All such decisions by the Contracting Authority are final and shall not be subject to complaint or dispute. 14. The Customer shall be responsible for monitoring of the Contractor’s compliance with the competitive procedure. Thus, the Contractor shall transmit any complaint received to the Customer. The Customer reserves the right to audit of the Contractor’s selection of subcontractors under the competitive procedure, in line with the requirements of the Prime Contract.
- Westinghouse Electric Poland Sp.z.o.oKrakówFrist: 30. Apr.
Fabrication of Reactor Vessel Flow Skirt (RVFS) (Commodity Code MI01) for Poland AP1000® Project
1. Experienced manufacturers / Fabricators capable of fabricating and furnishing the AP1000® RVFS (described below), must (i) contact (email and/or phone call) the Westinghouse Contact Person identified in section 1 to express interest and request an AP1000 supplier qualification questionnaire, and (ii) upon receipt, complete the AP1000 supplier qualification questionnaire with sufficient detail for Westinghouse evaluation and return it via email to the Westinghouse contact person. If there are any questions or clarifications needed, please reach out to the contact person listed above. 2. The qualification criteria shall be included in the AP1000 supplier qualification questionnaire, examples thereof include demonstration of: (i) demonstrated experience in furnishing similar components of around 3.4m outer diameter and 0.4m height; (ii) meeting the quality requirements for such equipment in a nuclear power plant, including having a Westinghouse or NIAC audited nuclear quality program complying with 10CFR50 Appendix B; (iii) certification of compliance with all applicable governmental policies, requirements, laws and regulations, applicable international treaties or agreements, and other regulatory requirements; (iv) financial standing (solvency) and (v) verification of capabilities. 3. Upon evaluation of your response to the AP1000 supplier qualification questionnaire, Westinghouse will determine if your company meets, or does not meet the qualification requirements and we will provide feedback. Submission of the AP1000 supplier qualification questionnaire does not automatically qualify your company to be supplier for the project. 4. Each qualified Supplier will be required to execute a Proprietary Information Agreement (PIA) / (Non-Disclosure Agreement (NDA)). 5. Companies meeting the qualification criteria and who have executed the PIA will be invited to submit a proposal. 6. The Request for Proposal (RFP) shall include the information about award criteria, scope of work, specifications, drawings, datasheets, terms and condition, and schedule data. 7. The Request for Proposal (RFP) document will be for unit one (1) of the three (3) unit project. 8. The scope of work for the subject RFP will include: • Overall project management, planning, scheduling, and reporting. • Procurement of material. • Material receipt • Preparation of necessary fabrication drawings and procedures (welding, coating, etc.), work packages (travelers), manufacturing and assembly plans, quality and inspection plan(s), shop lifting and handling plan (including lifting lug design, drawings, calculations, and testing), transportation plan, testing plan, weld documentation, personnel and process qualifications, and schedule. • Preparation of the necessary documentation to support site lifting, handling, and movement plans, including any special instructions or requirements for unloading, hauling, and storage. • Preparation of the necessary documentation to support site assembly. • Details of the joint configuration between the field welded steel components • Process qualification procedure and demonstration plans for critical processes including stud welding, automatic welding, long-seam butt welding, dimensional control, weld repairs, etc. • Fabrication based on the existing Westinghouse fleet design (not based on specific fabricator preferences). • Temporary attachments as required per the fabrication process selected. • Cleaning, marking, painting, packaging. • Non-Destructive Examination (NDE) and other Testing requirements as required by Fabrication Specification. 9. The RFP document will require furnishing of a Parent Company Guarantee if the prequalified Supplier is an affiliate of Parent Company. 10. Proposal may be requested in EURO, PLN (Polish Zloty), and/or USD . Furthermore, the proposals may be requested in a combination of Fixed Price (not subject to any price adjustment) and Firm Price (subject to adjustment per mutually agreed upon indices). 11. The final supplier evaluation and selection criteria will include price, compliance with technical, quality, and commercial requirements, experience in furnishing similar equipment, past performance, and compliance with the terms and conditions of purchase. 12. Any companies that do not meet mandatory compliance requirements in section 3 will be excluded. 13. The procedure for companies to gain access to proprietary information, if required, will be subject to compliance with the executed PIA /NDA, Applicable Export Laws, Applicable Laws, and Applicable Safeguards Laws which will be included in the RFP document. 14. If a large number of companies express interest and submit a completed AP1000 Supplier Questionnaire, the Contracting Authority reserves the right to conduct a preliminary down-selection of companies that demonstrate the highest qualification, capacity, and capability to perform the required scope of work. 15. The Contracting Authority also reserves the right to exclude any of the following from this Competitive Bidding process: A. any economic operator that is directly or indirectly owned or controlled by an entity from a country not covered by the Government Procurement Agreement ("GPA") with the EU; or B. economic operators who rely in the Competitive bidding process on capacities of any entities from countries not covered by the GPA with the EU. All such decisions by the Contracting Authority are final and shall not be subject to complaint or dispute. 16. The Customer shall be responsible for monitoring of the Contractor’s compliance with the competitive procedure. Thus, the Contractor shall transmit any complaint received to the Customer. The Customer reserves the right to audit of the Contractor’s selection of subcontractors under the competitive procedure, in line with the requirements of the Prime Contract.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 25. März 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Westinghouse Electric Poland Sp.z.o.o.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.