IT Security Consultancy
Elia Group operates two independent Information Security Management Systems (ISMS), which ensure compliance with national regulatory requirements such as ISO/IEC 27001, ISO/IEC 27019, IT Security Catalog, NIS2. Security Operations are performed jointly for both entities, leveraging a shared operational capability. We a...
Angebotsfrist:03. Juni 2026
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
Elia Group operates two independent Information Security Management Systems (ISMS), which ensure compliance with national regulatory requirements such as ISO/IEC 27001, ISO/IEC 27019, IT Security Catalog, NIS2. Security Operations are performed jointly for both entities, leveraging a shared operational capability. We are tendering a co...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: 50Hertz Transmission GmbH
- Veröffentlicht: 03. Mai 2026
- Frist: 03. Juni 2026
- Thema: IT-Sicherheit
Ausschreibungsbeschreibung
Elia Group operates two independent Information Security Management Systems (ISMS), which ensure compliance with national regulatory requirements such as ISO/IEC 27001, ISO/IEC 27019, IT Security Catalog, NIS2. Security Operations are performed jointly for both entities, leveraging a shared operational capability. We are tendering a consultancy service to meet our growing IT and OT Security needs.
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
10- Westinghouse Electric Poland Sp.z.o.oKrakówFrist: 20. Mai
AP1000 Non-Safety Related Ball and Plug Valves ASME B16.34 (Commodity Code PV40) for Poland AP1000® Project
Description: 1. 1. Experienced suppliers capable of fabrication, procurement of materials, assembly, documentation, inspection, factory acceptance testing, packaging, quality assurance/quality controls, special tooling, and fulfillment of all responsibilities to supply Non-Safety Related, ASME B16.34 Ball and Plug Valves as defined per the requirements of Westinghouse Electric Company LLC specifications, must (i) contact (email and/or phone call) the Westinghouse contact person identified in section 1 to express interest and request an AP1000 supplier qualification questionnaire, and (ii) upon receipt, complete the AP1000 supplier qualification questionnaire with sufficient detail for Westinghouse evaluation and return it via email to the Westinghouse contact person. 2. The qualification criteria shall include but is not necessarily limited to (i) demonstrated experience in furnishing similar scopes; (ii) The Supplier shall maintain a written Quality Assurance Program compliant with Purchase Order and Design Specification requirements (e.g. program that conforms to the applicable requirements of ISO 9001), including controls to prevent counterfeit or fraudulent items (CFSI); the program and its implementation are subject to review and verification before and during work execution; (iii) certification of compliance with all applicable governmental policies, requirements, laws and regulations, applicable international treaties or agreements, and other regulatory requirements; (iv) financial standing (solvency) and (v) verification of capabilities as further described in the AP1000 supplier qualification questionnaire. 3. Upon evaluation of your response to the AP1000 supplier qualification questionnaire, Westinghouse will determine if your company meets or does not meet the qualification requirements. Submission of the AP1000 supplier qualification questionnaire does not automatically qualify your company to be supplier for the project. 4. Each qualified Supplier will be required to execute a Proprietary Information Agreement (PIA). Companies meeting the qualification criteria and who have executed the PIA will be invited to submit a proposal. 5. The Request for Proposal (RFP) document will be for a three (3) unit project. 6. The scope of work for the subject RFP will include: • Overall project management, planning, scheduling, and reporting. • Procurement of material. • Material receipt • Preparation of necessary manufacturing drawings and procedures (welding, cleaning, marking, coating, packaging, etc.), work packages (travelers), internal manufacturing and assembly procedures, quality and inspection plan(s), factory acceptance testing procedure, quality documentation packages, personnel and process qualifications, and handling/storage instructions. • Non-Destructive Examination (NDE) and other Testing and Qualification requirements as required by Design Specification. 7. The RFP document will require furnishing of a Parent Company Guarantee if the pre-qualified Supplier is an affiliate of Parent Company. 8. Proposal may be requested in EURO, PLN (Polish Zloty), and/or USD. Furthermore, the proposals may be requested in a combination of Fixed Price (not subject to any price adjustment) and Firm Price (subject to adjustment per mutually agreed upon indices). 9. The final supplier evaluation and selection criteria will include price, compliance with technical, quality, and commercial requirements, experience in furnishing similar equipment, past performance, and compliance with the terms and conditions of purchase. 10. Any companies that do not meet mandatory compliance requirements in section 3 will be excluded. 11. The procedure for companies to gain access to proprietary information, if required, will be subject to compliance with the executed PIA/NDA, Applicable Export Laws, Applicable Laws, and Applicable Safeguards Laws which will be included in the RFP document. 12. If a large number of companies express interest and submit a completed AP1000 Supplier Questionnaire, the Contracting Authority reserves the right to conduct a preliminary down-selection of companies that demonstrate the highest qualification, capacity, and capability to perform the required scope of work. 13. The Contracting Authority also reserves the right to exclude any of the following from this Competitive Bidding process: A. any economic operator that is directly or indirectly owned or controlled by an entity from a country not covered by the Government Procurement Agreement ("GPA") with the EU; or B. economic operators who rely in the Competitive bidding process on capacities of any entities from countries not covered by the GPA with the EU. All such decisions by the Contracting Authority are final and shall not be subject to complaint or dispute. 14. The Customer shall be responsible for monitoring the Contractor’s compliance with the competitive procedure. Thus, the Contractor shall transmit any complaint received to the Customer. The Customer reserves the right to audit of the Contractor’s selection of subcontractors under the competitive procedure, in line with the requirements of the Prime Contract.
- Westinghouse Electric Poland Sp.z.o.oKrakówFrist: 20. Mai
AP1000® Non-Safety Related 1" & 2" Manually Operated Globe and Check Valves, ASME B16.34 (Commodity Code PV32) for Poland AP1000® Project
1. Experienced suppliers capable of fabrication, procurement of materials, assembly, documentation, inspection, factory acceptance testing, packaging, quality assurance/quality controls, special tooling, and fulfillment of all responsibilities to supply Non-Safety Related, ASME B16.34 1” and 2” Manually Operated Globe and Check Valves as defined per the requirements of Westinghouse Electric Company LLC specifications, must (i) contact (email and/or phone call) the Westinghouse contact person identified in section 1 to express interest and request an AP1000 supplier qualification questionnaire, and (ii) upon receipt, complete the AP1000 supplier qualification questionnaire with sufficient detail for Westinghouse evaluation and return it via email to the Westinghouse contact person. 2. The qualification criteria shall include but is not necessarily limited to (i) demonstrated experience in furnishing similar scopes; (ii) The Supplier shall maintain a written Quality Assurance Program compliant with Purchase Order and Design Specification requirements (e.g. program that conforms to the applicable requirements of ISO 9001), including controls to prevent counterfeit or fraudulent items (CFSI); the program and its implementation are subject to review and verification before and during work execution; (iii) certification of compliance with all applicable governmental policies, requirements, laws and regulations, applicable international treaties or agreements, and other regulatory requirements; (iv) financial standing (solvency) and (v) verification of capabilities as further described in the AP1000 supplier qualification questionnaire. 3. Upon evaluation of your response to the AP1000 supplier qualification questionnaire, Westinghouse will determine if your company meets or does not meet the qualification requirements. Submission of the AP1000 supplier qualification questionnaire does not automatically qualify your company to be supplier for the project. 4. Each qualified Supplier will be required to execute a Proprietary Information Agreement (PIA). Companies meeting the qualification criteria and who have executed the PIA will be invited to submit a proposal. 5. The Request for Proposal (RFP) document will be for a three (3) unit project. 6. The scope of work for the subject RFP will include: • Overall project management, planning, scheduling, and reporting. • Procurement of material. • Material receipt • Preparation of necessary manufacturing drawings and procedures (welding, cleaning, marking, coating, packaging, etc.), work packages (travelers), internal manufacturing and assembly procedures, quality and inspection plan(s), factory acceptance testing procedure, quality documentation packages, personnel and process qualifications, and handling/storage instructions. • Non-Destructive Examination (NDE) and other Testing and Qualification requirements as required by Design Specification. 7. The RFP document will require furnishing of a Parent Company Guarantee if the pre-qualified Supplier is an affiliate of Parent Company. 8. Proposal may be requested in EURO, PLN (Polish Zloty), and/or USD. Furthermore, the proposals may be requested in a combination of Fixed Price (not subject to any price adjustment) and Firm Price (subject to adjustment per mutually agreed upon indices). 9. The final supplier evaluation and selection criteria will include price, compliance with technical, quality, and commercial requirements, experience in furnishing similar equipment, past performance, and compliance with the terms and conditions of purchase. 10. Any companies that do not meet mandatory compliance requirements in section 3 will be excluded. 11. The procedure for companies to gain access to proprietary information, if required, will be subject to compliance with the executed PIA/NDA, Applicable Export Laws, Applicable Laws, and Applicable Safeguards Laws which will be included in the RFP document. 12. If a large number of companies express interest and submit a completed AP1000 Supplier Questionnaire, the Contracting Authority reserves the right to conduct a preliminary down-selection of companies that demonstrate the highest qualification, capacity, and capability to perform the required scope of work. 13. The Contracting Authority also reserves the right to exclude any of the following from this Competitive Bidding process: A. any economic operator that is directly or indirectly owned or controlled by an entity from a country not covered by the Government Procurement Agreement ("GPA") with the EU; or B. economic operators who rely in the Competitive bidding process on capacities of any entities from countries not covered by the GPA with the EU. All such decisions by the Contracting Authority are final and shall not be subject to complaint or dispute. 14. The Customer shall be responsible for monitoring the Contractor’s compliance with the competitive procedure. Thus, the Contractor shall transmit any complaint received to the Customer. The Customer reserves the right to audit of the Contractor’s selection of subcontractors under the competitive procedure, in line with the requirements of the Prime Contract.
- Westinghouse Electric Poland Sp.z.o.oKrakówFrist: 20. Mai
AP1000 Non-Safety Related Three Way Valves, ASME B16.34 (Commodity Code PV54) for Poland AP1000® Project
Description: 1. Experienced suppliers capable of fabrication, procurement of materials, assembly, documentation, inspection, factory acceptance testing, packaging, quality assurance/quality controls, special tooling, and fulfillment of all responsibilities to supply Non-Safety Related, ASME B16.34 Three Way Valves as defined per the requirements of Westinghouse Electric Company LLC specifications, must (i) contact (email and/or phone call) the Westinghouse contact person identified in section 1 to express interest and request an AP1000 supplier qualification questionnaire, and (ii) upon receipt, complete the AP1000 supplier qualification questionnaire with sufficient detail for Westinghouse evaluation and return it via email to the Westinghouse contact person. 2. The qualification criteria shall include but is not necessarily limited to (i) demonstrated experience in furnishing similar scopes; (ii) The Supplier shall maintain a written Quality Assurance Program compliant with Purchase Order and Design Specification requirements (e.g. program that conforms to the applicable requirements of ISO 9001), including controls to prevent counterfeit or fraudulent items (CFSI); the program and its implementation are subject to review and verification before and during work execution; (iii) certification of compliance with all applicable governmental policies, requirements, laws and regulations, applicable international treaties or agreements, and other regulatory requirements; (iv) financial standing (solvency) and (v) verification of capabilities as further described in the AP1000 supplier qualification questionnaire. 3. Upon evaluation of your response to the AP1000 supplier qualification questionnaire, Westinghouse will determine if your company meets or does not meet the qualification requirements. Submission of the AP1000 supplier qualification questionnaire does not automatically qualify your company to be supplier for the project. 4. Each qualified Supplier will be required to execute a Proprietary Information Agreement (PIA). Companies meeting the qualification criteria and who have executed the PIA will be invited to submit a proposal. 5. The Request for Proposal (RFP) document will be for a three (3) unit project. 6. The scope of work for the subject RFP will include: • Overall project management, planning, scheduling, and reporting. • Procurement of material. • Material receipt • Preparation of necessary manufacturing drawings and procedures (welding, cleaning, marking, coating, packaging, etc.), work packages (travelers), internal manufacturing and assembly procedures, quality and inspection plan(s), factory acceptance testing procedure, quality documentation packages, personnel and process qualifications, and handling/storage instructions. • Non-Destructive Examination (NDE) and other Testing and Qualification requirements as required by Design Specification. 7. The RFP document will require furnishing of a Parent Company Guarantee if the pre-qualified Supplier is an affiliate of Parent Company. 8. Proposal may be requested in EURO, PLN (Polish Zloty), and/or USD. Furthermore, the proposals may be requested in a combination of Fixed Price (not subject to any price adjustment) and Firm Price (subject to adjustment per mutually agreed upon indices). 9. The final supplier evaluation and selection criteria will include price, compliance with technical, quality, and commercial requirements, experience in furnishing similar equipment, past performance, and compliance with the terms and conditions of purchase. 10. Any companies that do not meet mandatory compliance requirements in section 3 will be excluded. 11. The procedure for companies to gain access to proprietary information, if required, will be subject to compliance with the executed PIA/NDA, Applicable Export Laws, Applicable Laws, and Applicable Safeguards Laws which will be included in the RFP document. 12. If a large number of companies express interest and submit a completed AP1000 Supplier Questionnaire, the Contracting Authority reserves the right to conduct a preliminary down-selection of companies that demonstrate the highest qualification, capacity, and capability to perform the required scope of work. 13. The Contracting Authority also reserves the right to exclude any of the following from this Competitive Bidding process: A. any economic operator that is directly or indirectly owned or controlled by an entity from a country not covered by the Government Procurement Agreement ("GPA") with the EU; or B. economic operators who rely in the Competitive bidding process on capacities of any entities from countries not covered by the GPA with the EU. All such decisions by the Contracting Authority are final and shall not be subject to complaint or dispute. 14. The Customer shall be responsible for monitoring the Contractor’s compliance with the competitive procedure. Thus, the Contractor shall transmit any complaint received to the Customer. The Customer reserves the right to audit of the Contractor’s selection of subcontractors under the competitive procedure, in line with the requirements of the Prime Contract.
- Westinghouse Electric Poland Sp.z.o.oKrakówFrist: 20. Mai
AP1000® Non-Safety Pressure Regulating Globe Valves, ASME B16.34 (Commodity Code PV45) for Poland AP1000® Project
Description: 1. Experienced suppliers capable of fabrication, procurement of materials, assembly, documentation, inspection, factory acceptance testing, packaging, quality assurance/quality controls, special tooling, and fulfillment of all responsibilities to supply Non-Safety Related, ASME B16.34 Pressure Regulating Globe Valves as defined per the requirements of Westinghouse Electric Company LLC specifications, must (i) contact (email and/or phone call) the Westinghouse contact person identified in section 1 to express interest and request an AP1000 supplier qualification questionnaire, and (ii) upon receipt, complete the AP1000 supplier qualification questionnaire with sufficient detail for Westinghouse evaluation and return it via email to the Westinghouse contact person. 2. The qualification criteria shall include but is not necessarily limited to (i) demonstrated experience in furnishing similar scopes; (ii) The Supplier shall maintain a written Quality Assurance Program compliant with Purchase Order and Design Specification requirements (e.g. program that conforms to the applicable requirements of ISO 9001), including controls to prevent counterfeit or fraudulent items (CFSI); the program and its implementation are subject to review and verification before and during work execution; (iii) certification of compliance with all applicable governmental policies, requirements, laws and regulations, applicable international treaties or agreements, and other regulatory requirements; (iv) financial standing (solvency) and (v) verification of capabilities as further described in the AP1000 supplier qualification questionnaire. 3. Upon evaluation of your response to the AP1000 supplier qualification questionnaire, Westinghouse will determine if your company meets or does not meet the qualification requirements. Submission of the AP1000 supplier qualification questionnaire does not automatically qualify your company to be supplier for the project. 4. Each qualified Supplier will be required to execute a Proprietary Information Agreement (PIA). Companies meeting the qualification criteria and who have executed the PIA will be invited to submit a proposal. 5. The Request for Proposal (RFP) document will be for a three (3) unit project. 6. The scope of work for the subject RFP will include: • Overall project management, planning, scheduling, and reporting. • Procurement of material. • Material receipt • Preparation of necessary manufacturing drawings and procedures (welding, cleaning, marking, coating, packaging, etc.), work packages (travelers), internal manufacturing and assembly procedures, quality and inspection plan(s), factory acceptance testing procedure, quality documentation packages, personnel and process qualifications, and handling/storage instructions. • Non-Destructive Examination (NDE) and other Testing and Qualification requirements as required by Design Specification. 7. The RFP document will require furnishing of a Parent Company Guarantee if the pre-qualified Supplier is an affiliate of Parent Company. 8. Proposal may be requested in EURO, PLN (Polish Zloty), and/or USD. Furthermore, the proposals may be requested in a combination of Fixed Price (not subject to any price adjustment) and Firm Price (subject to adjustment per mutually agreed upon indices). 9. The final supplier evaluation and selection criteria will include price, compliance with technical, quality, and commercial requirements, experience in furnishing similar equipment, past performance, and compliance with the terms and conditions of purchase. 10. Any companies that do not meet mandatory compliance requirements in section 3 will be excluded. 11. The procedure for companies to gain access to proprietary information, if required, will be subject to compliance with the executed PIA/NDA, Applicable Export Laws, Applicable Laws, and Applicable Safeguards Laws which will be included in the RFP document. 12. If a large number of companies express interest and submit a completed AP1000 Supplier Questionnaire, the Contracting Authority reserves the right to conduct a preliminary down-selection of companies that demonstrate the highest qualification, capacity, and capability to perform the required scope of work. 13. The Contracting Authority also reserves the right to exclude any of the following from this Competitive Bidding process: A. any economic operator that is directly or indirectly owned or controlled by an entity from a country not covered by the Government Procurement Agreement ("GPA") with the EU; or B. economic operators who rely in the Competitive bidding process on capacities of any entities from countries not covered by the GPA with the EU. All such decisions by the Contracting Authority are final and shall not be subject to complaint or dispute. 14. The Customer shall be responsible for monitoring the Contractor’s compliance with the competitive procedure. Thus, the Contractor shall transmit any complaint received to the Customer. The Customer reserves the right to audit of the Contractor’s selection of subcontractors under the competitive procedure, in line with the requirements of the Prime Contract.
- Westinghouse Electric Poland Sp.z.o.oKrakówFrist: 20. Mai
AP1000® Non-Safety Related Three Way Compressed Air Solenoid Valves (Commodity Code PV58) for Poland AP1000® Project
1. Experienced suppliers capable of fabrication, procurement of materials, assembly, documentation, inspection, factory acceptance testing, packaging, quality assurance/quality controls, special tooling, and fulfillment of all responsibilities to supply Non-Safety Related,Three Way Compressed Air Solenoid Valves as defined per the requirements of Westinghouse Electric Company LLC specifications, must (i) contact (email and/or phone call) the Westinghouse contact person identified in section 1 to express interest and request an AP1000 supplier qualification questionnaire, and (ii) upon receipt, complete the AP1000 supplier qualification questionnaire with sufficient detail for Westinghouse evaluation and return it via email to the Westinghouse contact person. 2. The qualification criteria shall include but is not necessarily limited to (i) demonstrated experience in furnishing similar scopes; (ii) The Supplier shall maintain a written Quality Assurance Program compliant with Purchase Order and Design Specification requirements (e.g. program that conforms to the applicable requirements of ISO 9001), including controls to prevent counterfeit or fraudulent items (CFSI); the program and its implementation are subject to review and verification before and during work execution; (iii) certification of compliance with all applicable governmental policies, requirements, laws and regulations, applicable international treaties or agreements, and other regulatory requirements; (iv) financial standing (solvency) and (v) verification of capabilities as further described in the AP1000 supplier qualification questionnaire. 3. Upon evaluation of your response to the AP1000 supplier qualification questionnaire, Westinghouse will determine if your company meets or does not meet the qualification requirements. Submission of the AP1000 supplier qualification questionnaire does not automatically qualify your company to be supplier for the project. 4. Each qualified Supplier will be required to execute a Proprietary Information Agreement (PIA). Companies meeting the qualification criteria and who have executed the PIA will be invited to submit a proposal. 5. The Request for Proposal (RFP) document will be for a three (3) unit project. 6. The scope of work for the subject RFP will include: • Overall project management, planning, scheduling, and reporting. • Procurement of material. • Material receipt • Preparation of necessary manufacturing drawings and procedures (welding, cleaning, marking, coating, packaging, etc.), work packages (travelers), internal manufacturing and assembly procedures, quality and inspection plan(s), factory acceptance testing procedure, quality documentation packages, personnel and process qualifications, and handling/storage instructions. • Non-Destructive Examination (NDE) and other Testing and Qualification requirements as required by Design Specification. 7. The RFP document will require furnishing of a Parent Company Guarantee if the pre-qualified Supplier is an affiliate of Parent Company. 8. Proposal may be requested in EURO, PLN (Polish Zloty), and/or USD. Furthermore, the proposals may be requested in a combination of Fixed Price (not subject to any price adjustment) and Firm Price (subject to adjustment per mutually agreed upon indices). 9. The final supplier evaluation and selection criteria will include price, compliance with technical, quality, and commercial requirements, experience in furnishing similar equipment, past performance, and compliance with the terms and conditions of purchase. 10. Any companies that do not meet mandatory compliance requirements in section 3 will be excluded. 11. The procedure for companies to gain access to proprietary information, if required, will be subject to compliance with the executed PIA/NDA, Applicable Export Laws, Applicable Laws, and Applicable Safeguards Laws which will be included in the RFP document. 12. If a large number of companies express interest and submit a completed AP1000 Supplier Questionnaire, the Contracting Authority reserves the right to conduct a preliminary down-selection of companies that demonstrate the highest qualification, capacity, and capability to perform the required scope of work. 13. The Contracting Authority also reserves the right to exclude any of the following from this Competitive Bidding process: A. any economic operator that is directly or indirectly owned or controlled by an entity from a country not covered by the Government Procurement Agreement ("GPA") with the EU; or B. economic operators who rely in the Competitive bidding process on capacities of any entities from countries not covered by the GPA with the EU. All such decisions by the Contracting Authority are final and shall not be subject to complaint or dispute. 14. The Customer shall be responsible for monitoring the Contractor’s compliance with the competitive procedure. Thus, the Contractor shall transmit any complaint received to the Customer. The Customer reserves the right to audit of the Contractor’s selection of subcontractors under the competitive procedure, in line with the requirements of the Prime Contract.
- Westinghouse Electric Poland Sp.z.o.oKrakówFrist: 20. Mai
AP1000 Non-Safety Related 3” & Larger Manually Operated Gate, Globe, & Check Valves, ASME B16.34 (Commodity Code PV33) for Poland AP1000® Project
Description: 1. Experienced suppliers capable of fabrication, procurement of materials, assembly, documentation, inspection, factory acceptance testing, packaging, quality assurance/quality controls, special tooling, and fulfillment of all responsibilities to supply Non-Safety Related, ASME B16.34, 3” and Larger Manually Operated Gate, Globe, and Check Valves as defined per the requirements of Westinghouse Electric Company LLC specifications, must (i) contact (email and/or phone call) the Westinghouse contact person identified in section 1 to express interest and request an AP1000 supplier qualification questionnaire, and (ii) upon receipt, complete the AP1000 supplier qualification questionnaire with sufficient detail for Westinghouse evaluation and return it via email to the Westinghouse contact person. 2. The qualification criteria shall include but is not necessarily limited to (i) demonstrated experience in furnishing similar scopes; (ii) The Supplier shall maintain a written Quality Assurance Program compliant with Purchase Order and Design Specification requirements (e.g. program that conforms to the applicable requirements of ISO 9001), including controls to prevent counterfeit or fraudulent items (CFSI); the program and its implementation are subject to review and verification before and during work execution; (iii) certification of compliance with all applicable governmental policies, requirements, laws and regulations, applicable international treaties or agreements, and other regulatory requirements; (iv) financial standing (solvency) and (v) verification of capabilities as further described in the AP1000 supplier qualification questionnaire. 3. Upon evaluation of your response to the AP1000 supplier qualification questionnaire, Westinghouse will determine if your company meets or does not meet the qualification requirements. Submission of the AP1000 supplier qualification questionnaire does not automatically qualify your company to be supplier for the project. 4. Each qualified Supplier will be required to execute a Proprietary Information Agreement (PIA). Companies meeting the qualification criteria and who have executed the PIA will be invited to submit a proposal. 5. The Request for Proposal (RFP) document will be for a three (3) unit project. 6. The scope of work for the subject RFP will include: • Overall project management, planning, scheduling, and reporting. • Procurement of material. • Material receipt • Preparation of necessary manufacturing drawings and procedures (welding, cleaning, marking, coating, packaging, etc.), work packages (travelers), internal manufacturing and assembly procedures, quality and inspection plan(s), factory acceptance testing procedure, quality documentation packages, personnel and process qualifications, and handling/storage instructions. • Non-Destructive Examination (NDE) and other Testing and Qualification requirements as required by Design Specification. 7. The RFP document will require furnishing of a Parent Company Guarantee if the pre-qualified Supplier is an affiliate of Parent Company. 8. Proposal may be requested in EURO, PLN (Polish Zloty), and/or USD. Furthermore, the proposals may be requested in a combination of Fixed Price (not subject to any price adjustment) and Firm Price (subject to adjustment per mutually agreed upon indices). 9. The final supplier evaluation and selection criteria will include price, compliance with technical, quality, and commercial requirements, experience in furnishing similar equipment, past performance, and compliance with the terms and conditions of purchase. 10. Any companies that do not meet mandatory compliance requirements in section 3 will be excluded. 11. The procedure for companies to gain access to proprietary information, if required, will be subject to compliance with the executed PIA/NDA, Applicable Export Laws, Applicable Laws, and Applicable Safeguards Laws which will be included in the RFP document. 12. If a large number of companies express interest and submit a completed AP1000 Supplier Questionnaire, the Contracting Authority reserves the right to conduct a preliminary down-selection of companies that demonstrate the highest qualification, capacity, and capability to perform the required scope of work. 13. The Contracting Authority also reserves the right to exclude any of the following from this Competitive Bidding process: A. any economic operator that is directly or indirectly owned or controlled by an entity from a country not covered by the Government Procurement Agreement ("GPA") with the EU; or B. economic operators who rely in the Competitive bidding process on capacities of any entities from countries not covered by the GPA with the EU. All such decisions by the Contracting Authority are final and shall not be subject to complaint or dispute. 14. The Customer shall be responsible for monitoring the Contractor’s compliance with the competitive procedure. Thus, the Contractor shall transmit any complaint received to the Customer. The Customer reserves the right to audit of the Contractor’s selection of subcontractors under the competitive procedure, in line with the requirements of the Prime Contract.
- Westinghouse Energy Systems LLC - Bulgaria BranchSofiaFrist: 08. Mai
Fabrication of Steam Turbine Generator (Commodity Code MG01) for Bulgaria AP1000® Project
Description: 1. Experienced suppliers capable of design, fabrication, procurement of materials, assembly, documentation, inspection, factory acceptance testing, packaging, quality assurance/quality controls, special tooling, and fulfillment of all responsibilities to supply Non-Safety Related Turbine Generator Packages as defined per the requirements of Westinghouse Electric Company LLC specifications, must (i) contact (email and/or phone call) the Westinghouse contact person identified in section 1 to express interest and request an AP1000 supplier qualification questionnaire, and (ii) upon receipt, complete the AP1000 supplier qualification questionnaire with sufficient detail for Westinghouse evaluation and return it via email to the Westinghouse contact person. 2. The qualification criteria shall include but is not necessarily limited to (i) demonstrated experience in furnishing similar scopes; (ii) The Supplier shall maintain a written Quality Assurance Program compliant with Purchase Order and Design Specification requirements (e.g. program that conforms to the applicable requirements of ISO 9001), including controls to prevent counterfeit or fraudulent items (CFSI); the program and its implementation are subject to review and verification before and during work execution; (iii) certification of compliance with all applicable governmental policies, requirements, laws and regulations, applicable international treaties or agreements, and other regulatory requirements; (iv) financial standing (solvency) and (v) verification of capabilities as further described in the AP1000 supplier qualification questionnaire. 3. Upon evaluation of your response to the AP1000 supplier qualification questionnaire, Westinghouse will determine if your company meets, or does not meet the qualification requirements. Submission of the AP1000 supplier qualification questionnaire does not automatically qualify your company to be a Supplier for the project. 4. Each qualified Supplier will be required to execute a Proprietary Information Agreement (PIA). Companies meeting the qualification criteria and who have executed the PIA will be invited to submit a proposal. 5. The Request for Proposal (RFP) document will be for a two (2) unit project. 6. The scope of work for the subject RFP will include: • Overall project management, planning, scheduling, and reporting. • Design of equipment. • Procurement of material. • Material receipt. • Preparation of necessary fabrication drawings and procedures (welding, coating, etc.), work packages (travelers), manufacturing and assembly plans, quality and inspection plan(s), shop lifting and handling plans (including lifting lug design, drawings, calculations, and testing if needed), transportation plan, testing plan, welding documentation, personnel and process qualifications, and schedules. • Preparation of the necessary documentation to support site lifting, handling, and movement plans, including any special instructions or requirements for unloading, hauling, and storage. • Process qualification procedure and demonstration plans for critical processes, including qualification mockups for the selected critical processes. • Cleaning, marking, painting, packaging. • Non-Destructive Examination (NDE) and other testing (i.e. Rotor Balancing) as required by Design Specification. 7. The RFP document will require furnishing of a Parent Company Guarantee if the prequalified Supplier is an affiliate of Parent Company. 8. Proposal may be requested in EURO and/or USD. Furthermore, the proposals may be requested in a combination of Fixed Price (not subject to any price adjustment) and Firm Price (subject to adjustment per mutually agreed upon indices). 9. The final Supplier evaluation and selection criteria will include price, compliance with technical, quality, and commercial requirements, experience in furnishing similar equipment, past performance, and compliance with the terms and conditions of purchase. 10. Any companies that do not meet mandatory compliance requirements in Section 3 will be excluded. 11. The procedure for companies to gain access to proprietary information, if required, will be subject to compliance with the executed PIA /NDA, Applicable Export Laws, Applicable Laws, and Applicable Safeguards Laws which will be included in the RFP document. 12. The Contracting Authority reserves the right to conduct a preliminary down-selection of companies that demonstrate the highest qualification, capacity, and capability to perform the required scope of work. 13. The Contracting Authority also reserves the right to exclude any of the following from this Competitive Bidding process: A. any economic operator that is directly or indirectly owned or controlled by an entity from a country not covered by the Government Procurement Agreement ("GPA") with the EU; or B. economic operators who rely in the Competitive bidding process on capacities of any entities from countries not covered by the GPA with the EU. All such decisions by the Contracting Authority are final and shall not be subject to complaint or dispute. 14. The Customer shall be responsible for monitoring of the Contractor’s compliance with the competitive procedure. Thus, the Contractor shall transmit any complaint received to the Customer. The Customer reserves the right to audit of the Contractor’s selection of subcontractors under the competitive procedure, in line with the requirements of the Prime Contract.
- Westinghouse Electric Poland Sp.z.o.oKrakówFrist: 30. Apr.
Manufacture of Safety Related 3” and Larger Manually Operated Gate, Stop Check, and Check Valves, ASME Boiler and Pressure Vessel Code, Section III, Class 1, 2, and 3 (Commodity Code PV03) for Poland AP1000® Project
1. Experienced suppliers capable of fabrication, procurement of materials, assembly, documentation, inspection, factory acceptance testing, packaging, quality assurance/quality controls, special tooling, QME-1 and IEEE testing, and fulfillment of all responsibilities defined in ASME B&PV Code, Section III for the NPT Certificate Holder for AP1000 Safety Related PV03, 3” and Larger Manually Operated Gate, Stop Check, and Check Valves, ASME Boiler and Pressure Vessel Code, Section III, Class 1, 2, and 3 (described below), must (i) contact (email and/or phone call) the Westinghouse contact person identified in section 1 to express interest and request an AP1000 supplier qualification questionnaire, and (ii) upon receipt, complete the AP1000 supplier qualification questionnaire with sufficient detail for Westinghouse evaluation and return it via email to the Westinghouse contact person. 2. The qualification criteria shall include but is not necessarily limited to (i) demonstrated experience in furnishing similar scopes; (ii) meeting the quality requirements for such equipment in a nuclear power plant, including having a Westinghouse or NIAC audited nuclear quality program complying with NQA-1 and 10CFR50 Appendix B; (iii) certification of compliance with all applicable governmental policies, requirements, laws and regulations, applicable international treaties or agreements, and other regulatory requirements; (iv) financial standing (solvency) and (v) verification of capabilities as further described in the AP1000 supplier qualification questionnaire. 3. Upon evaluation of your response to the AP1000 supplier qualification questionnaire, Westinghouse will determine if your company meets or does not meet the qualification requirements. Submission of the AP1000 supplier qualification questionnaire does not automatically qualify your company to be supplier for the project. 4. Each qualified Supplier will be required to execute a Proprietary Information Agreement (PIA). Companies meeting the qualification criteria and who have executed the PIA will be invited to submit a proposal. 5. The Request for Proposal (RFP) document will be for a three (3) unit project. 6. The scope of work for the subject RFP will include: • Overall project management, planning, scheduling, and reporting. • Procurement of material. • Material receipt • Preparation of necessary manufacturing drawings and procedures (welding, cleaning, marking, coating, packaging, etc.), work packages (travelers), internal manufacturing and assembly procedures, quality and inspection plan(s), factory acceptance testing procedure, quality documentation packages, personnel and process qualifications, and handling/storage instructions. • Non-Destructive Examination (NDE) and other Testing and Qualification requirements as required by Design Specification. 7. The RFP document will require furnishing of a Parent Company Guarantee if the prequalified Supplier is an affiliate of Parent Company. 8. Proposal may be requested in EURO, PLN (Polish Zloty), and/or USD. Furthermore, the proposals may be requested in a combination of Fixed Price (not subject to any price adjustment) and Firm Price (subject to adjustment per mutually agreed upon indices). 9. The final supplier evaluation and selection criteria will include price, compliance with technical, quality, and commercial requirements, experience in furnishing similar equipment, past performance, and compliance with the terms and conditions of purchase. 10. Any companies that do not meet mandatory compliance requirements in section 3 will be excluded. 11. The procedure for companies to gain access to proprietary information, if required, will be subject to compliance with the executed PIA/NDA, Applicable Export Laws, Applicable Laws, and Applicable Safeguards Laws which will be included in the RFP document. 12. If a large number of companies express interest and submit a completed AP1000 Supplier Questionnaire, the Contracting Authority reserves the right to conduct a preliminary down-selection of companies that demonstrate the highest qualification, capacity, and capability to perform the required scope of work. 13. The Contracting Authority also reserves the right to exclude any of the following from this Competitive Bidding process: A. any economic operator that is directly or indirectly owned or controlled by an entity from a country not covered by the Government Procurement Agreement ("GPA") with the EU; or B. economic operators who rely in the Competitive bidding process on capacities of any entities from countries not covered by the GPA with the EU. All such decisions by the Contracting Authority are final and shall not be subject to complaint or dispute. 14. The Customer shall be responsible for monitoring of the Contractor’s compliance with the competitive procedure. Thus, the Contractor shall transmit any complaint received to the Customer. The Customer reserves the right to audit of the Contractor’s selection of subcontractors under the competitive procedure, in line with the requirements of the Prime Contract.
- Westinghouse Electric Poland Sp.z.o.oKrakówFrist: 20. Mai
AP1000® Safety-Related Squib (Pyrotechnic Actuated) Valves, ASME Boiler and Pressure Vessel Code, Section III, Class 1 (Commodity Code PV70) for Poland AP1000® Project
Description: 1. Experienced suppliers capable of fabrication, procurement of materials, assembly, documentation, inspection, factory acceptance testing, packaging, quality assurance/quality controls, special tooling, QME-1 and IEEE testing, and fulfillment of all responsibilities defined in ASME B&PV Code, Section III for the NPT Certificate Holder for AP1000 Safety Related PV70 Squib (Pyrotechnic Actuated) Valves, ASME Boiler and Pressure Vessel Code, Section III, Class 1, (described below), must (i) contact (email and/or phone call) the Westinghouse contact person identified in section 1 to express interest and request an AP1000 supplier qualification questionnaire, and (ii) upon receipt, complete the AP1000 supplier qualification questionnaire with sufficient detail for Westinghouse evaluation and return it via email to the Westinghouse contact person. 2. The qualification criteria shall include but is not necessarily limited to (i) demonstrated experience in furnishing similar scopes; (ii) meeting the quality requirements for such equipment in a nuclear power plant, including having a Westinghouse or NIAC audited quality program complying with NQA-1 and 10CFR50 Appendix B; (iii) certification of compliance with all applicable governmental policies, requirements, laws and regulations, applicable international treaties or agreements, and other regulatory requirements; (iv) financial standing (solvency) and (v) verification of capabilities as further described in the AP1000 supplier qualification questionnaire. 3. Upon evaluation of your response to the AP1000 supplier qualification questionnaire, Westinghouse will determine if your company meets or does not meet the qualification requirements. Submission of the AP1000 supplier qualification questionnaire does not automatically qualify your company to be supplier for the project. 4. Each qualified Supplier will be required to execute a Proprietary Information Agreement (PIA). Companies meeting the qualification criteria and who have executed the PIA will be invited to submit a proposal. 5. The Request for Proposal (RFP) document will be for a three (3) unit project. 6. The scope of work for the subject RFP will include: • Overall project management, planning, scheduling, and reporting. • Procurement of material. • Material receipt • Preparation of necessary manufacturing drawings and procedures (welding, cleaning, marking, coating, packaging, etc.), work packages (travelers), internal manufacturing and assembly procedures, quality and inspection plan(s), factory acceptance testing procedure, quality documentation packages, personnel and process qualifications, and handling/storage instructions. • Non-Destructive Examination (NDE) and other Testing and Qualification requirements as required by Design Specification. 7. The RFP document will require furnishing of a Parent Company Guarantee if the pre-qualified Supplier is an affiliate of Parent Company. 8. Proposal may be requested in EURO, PLN (Polish Zloty), and/or USD. Furthermore, the proposals may be requested in a combination of Fixed Price (not subject to any price adjustment) and Firm Price (subject to adjustment per mutually agreed upon indices). 9. The final supplier evaluation and selection criteria will include price, compliance with technical, quality, and commercial requirements, experience in furnishing similar equipment, past performance, and compliance with the terms and conditions of purchase. 10. Any companies that do not meet mandatory compliance requirements in section 3 will be excluded. 11. The procedure for companies to gain access to proprietary information, if required, will be subject to compliance with the executed PIA/NDA, Applicable Export Laws, Applicable Laws, and Applicable Safeguards Laws which will be included in the RFP document. 12. If a large number of companies express interest and submit a completed AP1000 Supplier Questionnaire, the Contracting Authority reserves the right to conduct a preliminary down-selection of companies that demonstrate the highest qualification, capacity, and capability to perform the required scope of work. 13. The Contracting Authority also reserves the right to exclude any of the following from this Competitive Bidding process: A. any economic operator that is directly or indirectly owned or controlled by an entity from a country not covered by the Government Procurement Agreement ("GPA") with the EU; or B. economic operators who rely in the Competitive bidding process on capacities of any entities from countries not covered by the GPA with the EU. All such decisions by the Contracting Authority are final and shall not be subject to complaint or dispute. 14. The Customer shall be responsible for monitoring the Contractor’s compliance with the competitive procedure. Thus, the Contractor shall transmit any complaint received to the Customer. The Customer reserves the right to audit of the Contractor’s selection of subcontractors under the competitive procedure, in line with the requirements of the Prime Contract.
- Westinghouse Electric Poland Sp.z.o.oKrakówFrist: 30. Apr.
Fabrication of Reactor Vessel Flow Skirt (RVFS) (Commodity Code MI01) for Poland AP1000® Project
1. Experienced manufacturers / Fabricators capable of fabricating and furnishing the AP1000® RVFS (described below), must (i) contact (email and/or phone call) the Westinghouse Contact Person identified in section 1 to express interest and request an AP1000 supplier qualification questionnaire, and (ii) upon receipt, complete the AP1000 supplier qualification questionnaire with sufficient detail for Westinghouse evaluation and return it via email to the Westinghouse contact person. If there are any questions or clarifications needed, please reach out to the contact person listed above. 2. The qualification criteria shall be included in the AP1000 supplier qualification questionnaire, examples thereof include demonstration of: (i) demonstrated experience in furnishing similar components of around 3.4m outer diameter and 0.4m height; (ii) meeting the quality requirements for such equipment in a nuclear power plant, including having a Westinghouse or NIAC audited nuclear quality program complying with 10CFR50 Appendix B; (iii) certification of compliance with all applicable governmental policies, requirements, laws and regulations, applicable international treaties or agreements, and other regulatory requirements; (iv) financial standing (solvency) and (v) verification of capabilities. 3. Upon evaluation of your response to the AP1000 supplier qualification questionnaire, Westinghouse will determine if your company meets, or does not meet the qualification requirements and we will provide feedback. Submission of the AP1000 supplier qualification questionnaire does not automatically qualify your company to be supplier for the project. 4. Each qualified Supplier will be required to execute a Proprietary Information Agreement (PIA) / (Non-Disclosure Agreement (NDA)). 5. Companies meeting the qualification criteria and who have executed the PIA will be invited to submit a proposal. 6. The Request for Proposal (RFP) shall include the information about award criteria, scope of work, specifications, drawings, datasheets, terms and condition, and schedule data. 7. The Request for Proposal (RFP) document will be for unit one (1) of the three (3) unit project. 8. The scope of work for the subject RFP will include: • Overall project management, planning, scheduling, and reporting. • Procurement of material. • Material receipt • Preparation of necessary fabrication drawings and procedures (welding, coating, etc.), work packages (travelers), manufacturing and assembly plans, quality and inspection plan(s), shop lifting and handling plan (including lifting lug design, drawings, calculations, and testing), transportation plan, testing plan, weld documentation, personnel and process qualifications, and schedule. • Preparation of the necessary documentation to support site lifting, handling, and movement plans, including any special instructions or requirements for unloading, hauling, and storage. • Preparation of the necessary documentation to support site assembly. • Details of the joint configuration between the field welded steel components • Process qualification procedure and demonstration plans for critical processes including stud welding, automatic welding, long-seam butt welding, dimensional control, weld repairs, etc. • Fabrication based on the existing Westinghouse fleet design (not based on specific fabricator preferences). • Temporary attachments as required per the fabrication process selected. • Cleaning, marking, painting, packaging. • Non-Destructive Examination (NDE) and other Testing requirements as required by Fabrication Specification. 9. The RFP document will require furnishing of a Parent Company Guarantee if the prequalified Supplier is an affiliate of Parent Company. 10. Proposal may be requested in EURO, PLN (Polish Zloty), and/or USD . Furthermore, the proposals may be requested in a combination of Fixed Price (not subject to any price adjustment) and Firm Price (subject to adjustment per mutually agreed upon indices). 11. The final supplier evaluation and selection criteria will include price, compliance with technical, quality, and commercial requirements, experience in furnishing similar equipment, past performance, and compliance with the terms and conditions of purchase. 12. Any companies that do not meet mandatory compliance requirements in section 3 will be excluded. 13. The procedure for companies to gain access to proprietary information, if required, will be subject to compliance with the executed PIA /NDA, Applicable Export Laws, Applicable Laws, and Applicable Safeguards Laws which will be included in the RFP document. 14. If a large number of companies express interest and submit a completed AP1000 Supplier Questionnaire, the Contracting Authority reserves the right to conduct a preliminary down-selection of companies that demonstrate the highest qualification, capacity, and capability to perform the required scope of work. 15. The Contracting Authority also reserves the right to exclude any of the following from this Competitive Bidding process: A. any economic operator that is directly or indirectly owned or controlled by an entity from a country not covered by the Government Procurement Agreement ("GPA") with the EU; or B. economic operators who rely in the Competitive bidding process on capacities of any entities from countries not covered by the GPA with the EU. All such decisions by the Contracting Authority are final and shall not be subject to complaint or dispute. 16. The Customer shall be responsible for monitoring of the Contractor’s compliance with the competitive procedure. Thus, the Contractor shall transmit any complaint received to the Customer. The Customer reserves the right to audit of the Contractor’s selection of subcontractors under the competitive procedure, in line with the requirements of the Prime Contract.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 03. Juni 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist 50Hertz Transmission GmbH.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.