Integrated Measurement System for 2D/3D Fluid/Particle Velocity and Surface Deformation (2D/3D-PIV-DIC) for Trinity College Dublin (TCD)
The Department of Mechanical, Manufacturing and Biomedical Engineering in Trinity College Dublin requires the supply, delivery, installation, and commissioning of an advanced 2D/3D Particle Image Velocimetry (PIV) and Digital Image Correlation (DIC) system to support cutting-edge experimental research in fluid dynamics...
Angebotsfrist:29. April 2026
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
The Department of Mechanical, Manufacturing and Biomedical Engineering in Trinity College Dublin requires the supply, delivery, installation, and commissioning of an advanced 2D/3D Particle Image Velocimetry (PIV) and Digital Image Correlation (DIC) system to support cutting-edge experimental research in fluid dynamics and solid mechan...
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: Trinity College Dublin the University of Dublin_336
- Veröffentlicht: 08. April 2026
- Frist: 29. April 2026
Ausschreibungsbeschreibung
The Department of Mechanical, Manufacturing and Biomedical Engineering in Trinity College Dublin requires the supply, delivery, installation, and commissioning of an advanced 2D/3D Particle Image Velocimetry (PIV) and Digital Image Correlation (DIC) system to support cutting-edge experimental research in fluid dynamics and solid mechanics. The system shall comprise a high-energy pulsed laser, synchronised high-resolution cameras, precision timing and control units, and fully integrated acquisition and analysis software. The solution must be capable of capturing high-accuracy, time-resolved measurements of velocity fields, particle motion, and surface deformation, enabling two-dimensional (2D) and ideally also three-dimensional (3D) analysis. It should support applications involving complex flow regimes, multiphase flows, and structural behaviour under varying conditions. Flexibility for future upgrades is essential, including the potential to incorporate temperature and scalar concentration measurements. The equipment must demonstrate proven reliability, accuracy, and repeatability, and be suitable for intensive research use. Full installation, calibration, commissioning, and user training are required, along with comprehensive documentation and ongoing technical support. The system must integrate seamlessly with existing laboratory infrastructure and contribute to enhancing the Department’s research capabilities and output.
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Ausschreibungen
10- Universiteit UtrechtUtrecht
Supply, installation, commissioning and maintenance of a high-grade nanoscale 3D printing system for the Faculty of Science/ Utrecht University
Utrecht University's Faculty of Science wants to buy a high-grade nanoscale 3D printing system to produce topographical features. We would like to invite you to submit a quotation for the supply, installation, commissioning and maintenance of a high-grade nanoscale 3D printing system for the Faculty of Science.
- Education Procurement Service (EPS)LimerickFrist: 10. Apr.
LA3656C-UCD-CFT for the Supply of an Integrated Raman, SNOM and AFM all-in-one System for Micro to Nanoscale Characterisation for University College Dublin (UCD)
University College Dublin seeks a state-of-the-art multimodal imaging system integrating Raman spectroscopy, SNOM, and AFM with 532, 785, and 1064 nm lasers. The system enables correlative chemical, optical, and topographical analysis from microscale to nanoscale (200 nm resolution), providing spatially co-registered data. This transformative platform will position UCD as a leader in high-resolution spectroscopic imaging for physical sciences, life sciences, chemistry, and engineering.
- Education Procurement Service (EPS)LimerickFrist: 30. Apr.
LA3541C - RFT for the Supply, Delivery, Installation, Commissioning and Calibration of a Bioreactor Suite for Bioprocess Optimisation and Digestion Fermentation Modelling for University College Dublin
University College Dublin request Tenders for the supply, delivery and installation of a bioreactor platform for small-scale fermentation. The bioreactor platform must be capable of running parallel experiments in all the benchtop bioreactors with independent process control. The platform should consist of 3 x 3000 ml and 7 x 500 ml vessels. Each vessel should have the following accessories/measurements: ● Rushton impeller ● pH ● Dissolved Oxygen ● Heating - Heating Jacket ● Porous sparger ● Coo
- Lunds universitetLundFrist: 09. Mai
RFI: Advanced LC‑MS/MS System for Nanofluidic and Single‑Cell Applications
This Request for Information (RFI) aims to collect market input on advanced LC‑MS/MS systems capable of supporting highly specialized research in nanofluidic and single‑cell analysis. The RFI focuses on instrument performance, possibilities for factory‑level customization, integration with nanofluidic chip interfaces and external optical equipment, as well as delivery timelines and service arrangements. The information gathered will be used to assess the availability and suitability of solutions currently offered on the market and to support internal technical and strategic planning.
- Lappeenrannan-Lahden teknillinen yliopisto LUTLappeenrantaFrist: 04. Mai
Camera-based real-time motion tracking and motion capturing system
A camera-based real-time motion-tracking/motion-capture system for both indoor and outdoor use, enabling robust instrumentation for ongoing rugged and water-robotics research and accurate recording of the humans and industrial robots’ motion. Must deliver high-precision 3D tracking in an indoor volume of approximately 4 m × 3 m × ≥3 m with <20 ms end-to-end latency and ≥240 fps, supplied as a base package of at least six tracking cameras/sensors incl. calibration equipment, cabling, and software. Tracking data shall be accessible via a documented SDK/API from C/C++/Python and also Matlab/Simulink over the network from multiple clients; scalable to ≥16 tracked rigid bodies, with options for time-synchronised RGB video and ruggedised/outdoor-capable components.
- Fraunhofer-Gesellschaft - Einkauf B12
300mm fully automated high resolution in-line CD and overlay (IZM-133.1) - PR1191754-3460-P
1 piece: 300mm fully automated high resolution in-line CD and overlay (IZM-133.1) The following equipment specification defines the requirements for a fully automated metrology tool to measure overlay and critical dimension (CD) structures on 300 mm and 200 mm wafers, produced using laser direct imaging (LDI) and i-line lithography. This investment expands the metrology capability for automated measurement of smaller feature sizes. The tool is essential for non-destructive characterization of highly integrated, chiplet-based 2.5D/3D and quasi-monolithic package architectures with sub-micrometer feature sizes. The equipment is compatible with 3D wafer stacks exhibiting high warp/bow. Wafer substrates are silicon and/or glass, with thicknesses up to 2.5 mm. Before processing, wafers are delivered to the tool in front-opening unified pods (FOUPs), which the operator manually places on the respective load ports. The new tool must be able to perform the following sequence of steps fully automatically: - Load designated wafers from the FOUP(s) - Execute metrology tasks - Return wafers to their original positions in the FOUP(s) Recipe programming must support a sufficiently wide range of options and parameters to meet research and development (R&D) needs. It is required that the equipment continuously performs the intended functions without interruptions or failures, in accordance with all requirements specified in this document. Furthermore, the equipment must be supplied with all items described below that are necessary for it to deliver the intended functions and capabilities in compliance with all requirements set out in this document.
- Education Procurement Service (EPS)LimerickFrist: 30. Apr.
LA3363C-Request-for-Tenders under Open (National) Procedure for the Supply, Delivery, Installation and Commissioning of a Maskless Photolithography System for Dublin City University (DCU)
Tenders are sought for the Supply, Delivery, Installation and Commissioning of a maskless photolithography system to Dublin City University (DCU) which can create micron-scale (i.e. 1um or less) structures on SU8 coated silicon wafers by directly writing a design onto the wafer. The wafer size should be minimum standard 4" dimensions. Ideally, the instrument will be designed to operate outside a clean-room environment.
- Cork County CouncilCork
Provision of a public self-service printing, photocopying and scanning system for Cork County Council Library (Concessions Service)
Tender for the provision of a public self-service printing, photocopying, and scanning system for Cork County Council Library. This will involve the contracting of the service, commissioning, installation of kiosks and copiers plus a three-year contract extendable by 2 periods of 12 months each of a service contract to include provision and maintenance of all equipment and consumables, collection of cash at each location, training of staff, recycling of consumables and support for all equipment and services. It is not the intention of Cork County Council Library to purchase the equipment. This will be a concession arrangement with a percentage of the service revenue accruing to the library service. Current printing revenue from the existing service is in excess of €90,000 p.a.
- FMVStockholmFrist: 03. Mai
Diving system for mine clearance operations
The requested product is a diving system for military use including any necessary accessories, documentation and training. The diving system is a self-contained underwater breathing apparatus designed to support military diving operations where consideration regarding acoustic and electromagnetic signatures needs to be taken into account. Its main purpose is to enable human underwater stay, primarily for military use in mine countermeasures (MCM) and explosive ordnance disposal (EOD) missions in harsh conditions such as rough sea, sub-zero temperatures and low-visibility waters. The system consists of a diving apparatus which provides the diver with the proper breathing gas for the depth, and valid information during the dive. The system also logs information from the dive as support in planning of upcoming dives. The system shall be an electronic closed-circuit rebreather (eCCR). Key features of the diving system: Simplicity and ease of use Robustness and suitability for field operations Modularity to adapt to operational requirements Safety Low acoustic and electromagnetic signature Key performance requirements of the diving system: EN 14143 compliance or equivalent for the rebreather part of the system EN 250 compliance or equivalent for any open-circuit part of the system (bail-out) NATO standard AMP-15 compliance or equivalent for acoustic performance NATO standard AEODP-07 compliance or equivalent for magnetic performance Enable repeated operational diving in water temperatures down to –2°C Enable repeated operational diving in air temperatures down to at least –20°C Enable operational diving deeper than 60 msw Oxygen partial pressure control Some or all of the features and performance requirements listed above may be tested and evaluated by the Contracting authority (FMV) at a later stage of the procurement. The diving system shall also be compatible with a custom decompression algorithm provided by the Contracting authority to the winning tenderer. The tenderer must be able and willing to implement this algorithm into the computer of the diving system. Supply contract The expected volume requirement is 100 systems and another 40 as options delivered over four (4) years and first delivery approximately 30 systems one (1) year after signed contract. Framework agreement The procured system will need to be maintained throughout the lifespan of the system. The agreement will most likely include: - technical support helpdesk (telephone) - technical support on site (repairs) - preventive maintenance - spare parts - software updates - education and training - alteration/modification if needed - configuration management and follow-up
- Fingrid OyjHelsinkiFrist: 27. Apr.
AAMOS – Enterprise Architecture management system
Fingrid Oyj (the Client) is tendering for an Enterprise Architecture management solution delivered as a SaaS service. The Client is Fingrid and its group companies (Fingrid Datahub Oy and Finextra Oy). Data within the solution must be located and processed within the EU and EEA area. The purpose of the solution is to support the collection and structuring of Fingrid’s current‑state architecture and to enable the planning of alternative target states and the required change. The system will replace the functionalities of the current tools used for architecture modelling, architecture management and publication, and will serve as a unifying platform for managing business processes, data domains, applications, and technology. The scope of the procurement includes SaaS Software‑as‑a‑Service user licenses for Fingrid’s enterprise architecture user groups (enterprise content viewers, dashboard/report viewers, enterprise architecture admins, and content contributors), as well as the technical components required to support architecture planning, modelling, analysis, visualization and publication. The procurement also includes a Delivery Project, covering the technical implementation of the system, integrations with pre-defined source systems, and the refinement and deployment of the first-phase use cases. In addition, the procurement includes Support and Advisory Services covering product support, end‑user support, and the ability to obtain expert advisory services to ensure effective system utilization. The system must also support Continuous Development, enabling Fingrid to expand, refine, and evolve its enterprise architecture practices, modelling conventions, visualizations, and integrations throughout the contract period. A more detailed description of the procurement is provided in Appendix 1, Project Description.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 29. April 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Trinity College Dublin the University of Dublin_336.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.