Carrickamore Quarries Ltd RFQ for Machinery and Equipment for their Construction and Demolition Waste Recycling Facility
The Supply, Delivery, and Commissioning of Machinery and Equipment for their Construction and Demolition Waste Recycling Facility at Carrickamore Quarries Carrickamore, Carrickmacross, Co. Monaghan, A81 YK88
Angebotsfrist:10. Mai 2026
Typ:Ausschreibung
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
The Supply, Delivery, and Commissioning of Machinery and Equipment for their Construction and Demolition Waste Recycling Facility at Carrickamore Quarries Carrickamore, Carrickmacross, Co. Monaghan, A81 YK88
- Ausschreibungstyp: Ausschreibung
- Auftraggeber: Carrickamore Quarries Limited
- Veröffentlicht: 13. April 2026
- Frist: 10. Mai 2026
Ausschreibungsbeschreibung
The Supply, Delivery, and Commissioning of Machinery and Equipment for their Construction and Demolition Waste Recycling Facility at Carrickamore Quarries Carrickamore, Carrickmacross, Co. Monaghan, A81 YK88
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Ausschreibungen
9- Carrickamore Quarries LimitedCarrickmacrossFrist: 10. Mai
Carrickamore Quarries Ltd RFQ for Machinery and Equipment for their Construction and Demolition Waste Recycling Facility
Lieferung, Montage und Inbetriebnahme von Maschinen und Ausrüstung für die Recyclinganlage für Bau- und Abbruchabfälle in den Carrickamore Quarries, Carrickamore, Carrickmacross, Co. Monaghan, A81 YK88.
- Tipperary Education and Training Board_1284Nenagh
The Supply and Delivery of Construction Plant Fitting Equipment for Tipperary Education and Training Board FET College Archerstown Thurles Co Tipperary
The Supply and Delivery of Construction Plant Fitting Equipment for Tipperary Education and Training Board FET College Archerstown Thurles Co Tipperary
- Kilkenny and Carlow ETBKilkenny
Request for Tenders for a single party framework for the Supply, Delivery, Installation and Commissioning of Electrical Apprenticeship Equipment and Materials
Request for Tenders for a single party framework for the Supply, Delivery, Installation and Commissioning of Electrical Apprenticeship Equipment and Materials to facilitate the delivery of the Electrical apprenticeship Curriculum- Phase 2 to Kilkenny and Carlow Education and Training Board. There are four (4) categories, namely Domestic, Industrial, Motor and Cable.
- Tipperary Education and Training Board_1284Nenagh
The Supply Delivery and Installation of Electronic Security System Equipment for Tipperary Education and Training Board FET College, Archerstown, Thurles, Co. Tipperary E41 YH58
The Supply Delivery and Installation of Electronic Security System Equipment for Tipperary Education and Training Board FET College, Archerstown, Thurles, Co. Tipperary E41 YH58
- European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEsBrusselsFrist: 08. Juni
Supply of Reinforced Concrete Containers and Metallic Drums Fabrication Plants for radioactive waste management in Armenia
Armenia seeks suppliers for equipment and services to establish radioactive waste storage container production facilities. Lot 1: RCC Fabrication Plant (15 units/week) including design, manufacturing, supply of equipment, design docs, and royalty-free RCC manufacturing license. Supplier must produce 3 RCC for certification tests. Lot 2: Metallic Drums Fabrication Plant (3750 units/year of 165L and 200L drums) including design, manufacturing, and supply of equipment. Armenian counterparts handle building construction and equipment installation/commissioning under supplier supervision.
- Sectoral Procurement DirectorateFloriana
SPD4/2025/065 - Tender for the Supply, Installation, Testing and Commissioning of a Vacuum Insulated Evaporator (VIE) Tank including All Pipework and Equipment from VIE to the Supply Points at SVP
SPD4/2025/065 - Tender for the Supply, Installation, Testing and Commissioning of a Vacuum Insulated Evaporator (VIE) Tank including All Pipework and Equipment from VIE to the Supply Points at St Vincent de Paul
- Munster Technological University.Tralee
Tender for the Supply, Delivery, Installation and Commissioning of Re-Saw, 5-Sided Planer Moulder, Tilting Spindle Moulder, Crosscut Saw, Shredder, Bandsaw and Briquetting Machinery to MTU Kerry
MTU has a tender requirement for the Supply, Delivery, Installation and Commissioning of Re-Saw, 5-Sided Planer Moulder, Tilting Spindle Moulder, Crosscut Saw, Shredder, Bandsaw and Briquetting Machinery to the Carpentry and Joinery Workshop at MTU Kerry Campus. Each lot will be evaluated separately. Interested suppliers may apply for 1 or more Lots. Full details are in the tender documentation attached to this Contract Notice.
- Cork Education and Training BoardCorkFrist: 03. Apr.
Single Party Framework Agreement relating to The Supply, Delivery and Commissioning of Life Sciences Equipment for the Cork Education and Training Board
The Cork Education and Training Board proposes to engage in a competitive process for the establishment of a single party framework agreement for The Supply, Delivery and Commissioning of Life Sciences Equipment. Delivery is initially to the CCFET Life Sciences Centre, Carrigaline, Cork as required. The specifications identified within the tender are for one (1) Filter Integrity Test Instrument, one (1) Ready to Process Wave Bioreactor and two (2) Tangential Flow Filtration (TFF) System, intende
- Gas Networks IrelandCorkFrist: 09. Apr.
25/064 - Qualification System for for the provision of Polyethylene (PE) Pipe, Fittings and Valves
The objective of this QSQ is to qualify Applicants onto the Qualifications System for the manufacturing and supply of Polyethylene (PE) Pipe, Fittings and Valves for Gas Networks Ireland. The proposed supply requirements are to be divided into four (4) separate lots as detailed below: • Lot 1 (PE Pipe 90mm - 400mm) – Manufacture and supply of PE pipe for gas. • Lot 2 (PE Pipe 20mm - 63mm) – Manufacture and supply of PE pipe for gas. • Lot 3 (PE Fittings) Manufacture and/or supply of PE Fittings for gas. These include but are not limited to PE; caps, couplings, elbows, equal tees, flange adaptors, reducers, tee branch saddles, tees, tapping tees, G clamp adaptors, multi tap tees, branch saddles, bends, unequal tees and end caps. • Lot 4 (PE ball valves) – Manufacture and/or supply of PE Valves for gas. These include but not limited to valves ranging in size from small diameter 20mm to larger diameters up to 315 mm. Please note: Lots 1 and 2 relate to manufacture and supply requirements. Lots 3 and 4 relate to manufacture and/or supply requirements. The requirements for the manufacture and/or supply of pipes, fittings and valves under this Qualification System will include arrangements for delivery to various stipulated depot destinations on the island of Ireland and the ability to operate a national distribution network. Applicants should note that from time to time over the term of the Qualification System, the Contracting Entity, at its sole discretion but without altering the overall nature of the Qualification System, may modify the Qualification System to reflect changes in its requirements. Such modifications may include changes to the pipe diameter and pressure rating which may result in an increase to the pipe size, wall thickness and pipe properties or specification and the provision of services or additional supplies associated with such changes. The Contracting Entity will also seek similar changes to pipe fittings and valves. The conditions under which such an option may be exercised by the Contracting Entity will be outlined in the relevant call off competition document. The Contracting Entity also reserves the right to add additional lots to the Qualification System. Applicants may apply for qualification in one or more lots. At the discretion of the Contracting Entity a full site visit and audit of the prospective Qualified applicants supply chain manufacturing facility(s) will be carried out to validate and support their pre-qualification submission. In the event of a site visit and audit being carried out to pre-qualify the Supplier must successfully pass this site inspection audit. It is envisaged that the scope of products and services of the initial Call for Competition to be drawn-down under the Qualification System will be, but not limited to; PE pipes, fittings and valves and will cover the following: 1. Standards: • Gas - as per I.S. EN 1555 or equivalent. 2. Indicative Diameter Range: • PE pipe, fittings and valves ranging in size from small diameter 20mm to large diameter 400 mm pipe and fittings. 3. Indicative Pipe Specification/Types: • Solid wall pipe; • Coextruded pipe; • Peelable pipe; and 4. Indicative Pressure Range and Pipe Materials : Pipe Material/Description Pressure Range (Barg) PE 100 (SDR 11) 7 PE 80 (SDR 11) 4 PE 100 (SDR 17) 4 PE 80 (SDR 17) 2 5. Colour • PE80: solid wall PE pipe in yellow colour • PE80: c-extruded wall PE pipe with outer layer in yellow colour • PE100: solid wall PE pipe in orange colour (sizes 180mm and above) • PE100: PE 100 PE pipe with peelable outer layer in yellow colour (with stripes) • Pipes for proof-of-concept hydrogen projects shall be yellow with blue axial stripes.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf auftrag.ai. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 10. Mai 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Carrickamore Quarries Limited.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf auftrag.ai werden diese Punkte priorisiert dargestellt.